Hello.
I have a general question.
Motherboard - ASUS Crosshair V Formula-Z AM3+ AMD 990FX SATA 6Gb/s USB 3.0 ATX AMD Gaming Motherboard with 3-Way SLI/CrossFireX Support
Bios Version - 1701
CPU- AMD FX-9370 Vishera 4.4GHz Socket
CPU Cooler - Corsair H100i with a Push config
Memory - G.SKILL Trident X Series 16GB (2 x 8GB) 240-Pin DDR3 SDRAM DDR3 2400 (PC3 19200) Desktop Memory Model F3-2400C10D-16GTX
Video Card - EVGA 03G-P4-2881-KR GeForce GTX 780 Ti
Power Supply - Corshair Hx 1050w (80+ gold)
Primary Drive (with OS) - SAMSUNG 840 EVO MZ-7TE500BW 2.5" 500GB SATA III MLC Internal Solid State Drive (SSD)
Secondary Drives (raid 0) - 2x Seagate Momentus XT ST92505610AS 250GB
Operating System - Windows 8.1 Pro 64bit
Question -
I was playing Bf4 and my game froze with a sound loop. I was still able to move the mouse and close windows but could not open anything else (the machine ran very sluggish). I hard restarted the machine and reviewed the AI probe logs- It appears my 12v dropped to 6.x for a split second and my 3.3v jumped to 6.x volts for a split second. I don't know if that has any correlation. I was having these same issues before I switched out my PSU. I have the Bios "extreme OC profile enabled" (so no power saving options are enabled). I do not notice any of my temps going above average (CPU does not go above 60c and Videocard does not go above 75c)
I have both 4 and 8pin plugged in. I currently have my voltages set to auto, except my memory - I have that running at 1.65v which is what they are rated at.
What do I need to set my CPU, CPU/NB, HT voltages to? I've seen videos were they will set it to what it is currently running at the time they are in the bios BUT I've experienced that the bios will sometimes read the voltage lower then normal (-+ 0.12 v)
I have 15 days to return this board through a RMA process, I want to make sure I check everything before I pass this mark. What should I lock my voltages at?
I've also tried using the Asus "extreme" OC profile but the system crashed when it reached 4.6, though I think its because I have the memory clocked at 2400 already .
any suggestions will be very helpful!
Motherboard - ASUS Crosshair V Formula-Z AM3+
Bios Version - 1701
CPU- AMD FX-9370 Vishera 4.4GHz Socket
CPU Cooler - Corsair H100i with a Push config
Memory - G.SKILL Trident X Series 16GB (2 x 8GB) 2400Model F3-2400C10D-16GTX
Video Card - EVGA GeForce GTX 780 Ti
Power Supply - Corshair Hx 1050w (80+ gold)
Primary Drive - SAMSUNG 840 EVO SSD
Secondary Drives (raid 0) - 2x Seagate Momentus XT ST92505610AS 250GB
Operating System - Windows 8.1 Pro 64bit