Quick Inquiry About Voltages

[elbrian]

No need to set your SB voltage to 1.25v, leave it and your NB voltage on Auto.
You need to focus on the CPU/NB voltage, set it to 1.275v, which is completely safe.
I run my CPU/NB voltage at 1.3875v on a 24/7 basis with my CPU@ 4.05GHz, CPU/NB@ 3034MHz, and 2x4GB G.Skill@ 2023MHz.

Ever since setting my SB and NB, I have been experiencing crashes (frozen screen, sometimes I have to manually reset using the power button, sometimes it auto-reboots). Once every 10-60 minutes, always at idle (it never crashes from BF3).

I am going home from work in 20 minutes, and will reset my SB and NB to auto, and set my CPU/NB to 1.275v manually.

I will report back shortly.

PS: Thank you guys again, so very much. I was getting ready to give up on this build, return everything, and buy some pre-made POS. Thank you, thank you, thank you.

[elbrian]

http://i.imgur.com/UUoOL.jpg

Here's an updated snapshot of my voltages via SpeedFan.

[elbrian]

I just wanted to comment on this post and say that I have gone 4 days without a single BSOD, and I have been using my PC hard and for extended periods of time (played BF3 and Skyrim for over 6 hours on Saturday).

Mark this one [SOLVED], boys. Thank you all again for the help.

[NemesisChild]

Congrats!!!

So it was simply a matter of setting a higher CPU/NB voltage?