I have the following configurion:
Motherboard:Aus Rampage III extreme
Processor: Intel Core i7-940
Memory: Kingston KHX1800C9D3T1K3/6GX
6GB (2GB 256M x 64-Bit x 3 pcs.) DDR3-1800MHz
@ 9-9-9-27 at 1.65V
GPU: EVGA GTX 275
Cpu Cooler: Thermaltake frio
PSU: Coolermaster silent Pro 80Plus Bronze 1000W
In my motherboard i had set the AI Overclock tuner to XMP mode since i have the above ram classified as XMP memory. Currently set the cpu multiplier to 22 and bclk to 150 therefore running at 3.51 GHz. Also ran the prime95 blendtest for 8 hours and found no errors.
Ran intel burn test at maximum and system was stable with temps 70C.
After the above i shutdown the system, when i try to start next day i see the following error during bios post:
"Overclocking failed". why is this happening ?
The bios version is 1005
Is the problem with bios or PSU or overclock settings.
Repeated the same scenario next day and again on the coming day found the same problem.
why the problem not appearing during restarts after overclocked settings?
I mean to say the problem arises only when i shutdown the system for atleast 12hours.
After 12 hours if i start the system then i recieved overclocking failed message?