ASUS ROG-TJ11 Diablo III Case Mod By Ban Nguyen

Late last year we saw the fantastic ROG Rampage Mod by Ban Nguyen, and now he's back again, this time attacking a standard Silverstone TJ11 to shoehorn in some watercooled ROG love, all wrapped in Blizzards upcoming Diablo 3 designs with his latest ROG-TJ11 Diablo III Case Mod. Be sure to see the link to bit-tech's modding forum for more intimate updates, but first here's from start to finish:

[gallery include="" size="medium" link="file" template="file-gallery" columns="2"]

1. Stripping down the TJ11

[gallery include="" size="medium" link="file" template="file-gallery" columns="2"]

2. Making the radiator brackets

This fits two Black Ice GTX 280 radiators, with the idea that it's easier to install/remove with a central bracket.

[gallery include="" size="medium" link="file" template="file-gallery"]

3. Preparing the pumps and BitsPower barbs

Two D5 and RP450 pumps from Koolance, with a complete set of BitsPower 90º rotary adapters and SLI connectors.

[gallery include="" size="medium" link="file" template="file-gallery" columns="2"]

4. Preparing the GPU blocks and taking it for a test run

The EK VGA blocks for his two ASUS GTX 580 DirectCU II. At first it was a bit difficult to setup:

[gallery include="" size="medium" link="file" template="file-gallery"]

5. The interconnect plate

Measurements are take for the rear interconnect plate - a signature feature of Ban, where he uses solid piping to move the liquid plane movement into a fixed area. The effect is always aesthetically beautiful.

The bottom plate connects the pump, radiator and graphics cards.

[gallery include="" size="medium" link="file" template="file-gallery" columns="2"]

6. Custom Reserviors

Customized reservoirs were made to fit the TJ11 specifically. Acrylic and super glue (CHCL3) provide an air-tight seal.  It connects both pumps to two separate loops.

To make it look nicer, Ban covered it in custom cut Diablo 3/Blizzard covers. Note how he uses the O in to fit a barb.

[gallery include="" size="medium" link="file" template="file-gallery" columns="2"]

7. Testing out the red lighting

Looks good so far!

8. Close-ups of the fitted ROG hardware as it progresses

With the neatest way to overcome the watercooled SLI issue:

[gallery include="" size="medium" link="file" template="file-gallery" columns="2"]

9. Testing the interconnect plate

[gallery include="" size="medium" link="file" template="file-gallery" columns="2"]

10. Adding red detailing to the TJ11

[gallery include="" size="medium" link="file" template="file-gallery" columns="2"]

11. Cabling update

[gallery include="" size="medium" link="file" template="file-gallery" columns="2"]

12. Front panel design

You'll see the effect in the final pictures on page 4...

The final result: ASUS ROG-TJ11 Diablo III Case Mod, By Ban Nguyen

[gallery include="23327,23327,,,,26,23327,23327,,23327,23327" size="medium" link="file" template="file-gallery" columns="2"]

Let us know your thoughts, in the forums!