PDA

View Full Version : Matrix 580gtx dont workinggg!!!!!!!!!!!!! i bought TODAYY!!!!!!!!!!!!



Xipe
01-26-2012, 11:05 PM
I bought today this graphic card. At noon i put the graphic with other 580gtx MSI and all go very good. But i come home at afternoon the matrix dont workinggg. I tried all slots and nothing. The fans go but the ligth of "asus MATRIX" dont iluminate...

Plz Helppppppp. In windows 7 dont recognize the card..... The leds of power are ok (light greens)..... the card bought today!!!!!!!!

xeromist
01-26-2012, 11:11 PM
What happens if you take the MSI out and run only the Matrix? Does that work?

Xipe
01-26-2012, 11:13 PM
Dont work, no signal.... but fans are running, and the botom of 100% fan and (+) (-) are ok.....

RonanC
01-26-2012, 11:17 PM
are the pcie leds red or green?

Xipe
01-26-2012, 11:19 PM
leds of the card are green.

my motherboard is rampage III Extreme. And PS AX1200W

RonanC
01-26-2012, 11:22 PM
shut down pc, hold your finger on the safe mode on the back of the card, pull the power plug and plug it back in while still holding down the safe mode, you should see the matrix glow green, boot to windows and if gpu tweak is installed it will promt you to reset bios, click yes

RonanC
01-26-2012, 11:23 PM
worth a try, the bios might have got corrupted some how

Xipe
01-26-2012, 11:27 PM
i tried safe mode, but windows doesnt appear the 580gtx matrix. Only te MSI. If i try only the asus, no signal.... :( I bought today, and at noon i played bf3 and 3dmark 11.... i dont understand....

RonanC
01-26-2012, 11:30 PM
take the msi out of the computer, install the matrix in the slot the msi one was,

when you tried safe mode was the matrix logo glowing green? you need to make sure you follow my instructions above to activate safe mode simply pressing it will not work

Xipe
01-26-2012, 11:33 PM
ok, i will go now.

RonanC
01-26-2012, 11:52 PM
also make sure you have GPU TWEAK installed, download version 1.10, also uninstall msi afterburner if you have that installed.

http://support.asus.com/download.aspx?SLanguage=en&p=9&s=13&m=GPU%20Tweak&os=30&hashedid=n/a

Xipe
01-26-2012, 11:55 PM
Nothing. have i put the cables wich comes with the card? 6+6=8? or directy from my PSU? i have a ax1200w with 4 connector of 8pin. or cables which come with the card?

RonanC
01-26-2012, 11:59 PM
just use the ax1200 pcie cables 2 x 8,

can you confirm you tried safe mode? did the matrix logo illuminate green at all?

Xipe
01-27-2012, 12:03 AM
logo of safe mode iluminate (green) but nothing. no signal.... :(

cravinmild
01-27-2012, 12:10 AM
dude that really sucks, i feel for ya.

RonanC
01-27-2012, 01:14 AM
ok this is not looking good,

can you try the second dvi port? or if u have HDMI cable try use that with a dvi adapter if u dont have a hdmi port on screen

InnervateD
01-27-2012, 01:28 AM
What are you running on your system? Full specs please. Include the power supply.