Crossblade Ranger not booting/no video

[ClouD3d]

First of all sorry for my bad english.

Hi everybody I'll try my best to explain my case... My computer used to work just fine but like a week ago there was a blackout in my country the next day I tried to turn it on and It did but there was not "video signal", I tried to clean my ram, plug the VGA cable directly on the motherboard instead of on my graphic card and still no video signal, then I tried to look up each Q code that the motherboard showed me and the codes started to change but still no video signal; finally I upgraded the BIOS and the BIOS'S botton and A Green light start to blink (both of them) and then they stop like it has finished to install the bios but still not getting anything on my screen... Btw now the Q code change from one number to another like going crazy (this is after upgrading the BIOS)

I'm very sad I dont wanna think that my mobo its broken :/ and it is weird because it turns on all it's lights, all my components get warm like they are working, all the fan spins, video card turns on too. So I dont know what to think or what to do :confused:

PS: I've test all my components in my brothers computer and they work, I mean my graphic card, processor, hard drive, ram and power supply and they work fine.

Hope somebody can help me out

75312

75313

75314


https://youtu.be/lZOKhg-Dfxk


https://youtu.be/jG4-btJ3xC4

[pndiode]

I see the BIOS button lit, but no USB stick. The Green flashing LED flashes when you press the BIOS Flashback button for BIOS update.
Did you format (fat 32) a USB stick?
Did you extract the BIOS file to the USB stick and rename the BIOS file?

75318


Try putting your memory modules/sticks in the red slots (A2 and B2). .

75319


Hope this helps.

[ClouD3d]

I see the BIOS button lit, but no USB stick. The Green flashing LED flashes when you press the BIOS Flashback button for BIOS update.
Did you format (fat 32) a USB stick?
Did you extract the BIOS file to the USB stick and rename the BIOS file?

75318


Try putting your memory modules/sticks in the red slots (A2 and B2). .

75319


Hope this helps.


¡Hi! thanks for replying so fast ;)

As you can see in the last picture my sticks are already in the red slots. You cannot see the USB stick because it was in a upper USB port (next to the one that says "KeyBot Port") I think that was my mistake... Do I have to use the port that says "KeyBot Port" or the one that says "USB BIOS Flashback Port"?, And I downloaded the BIOS directly from Asus webpage but I didnt renamed it, the name is "CROSSBLADE-RANGER-ASUS-1803.CAP" how should I rename it?

Thanks in advance, I'll wait for your answer :D

[pndiode]

Yes, use the USB BIOS Flashback port.

Right click on the on the
CROSSBLADE-RANGER-ASUS-1803.CAP file and rename it to CROSBLDR.CAP

75323

Rename file YouTube example:
https://www.youtube.com/watch?v=ERwnCcozz5k

Copy it to a formatted FAT32 USB stick and plug it into the USB BIOS Flashback port.

Press the USB BIOS Flashback button. And it will blink for approximately two minutes.
When the BIOS Flashback button stops blinking it's done.


BIOS Flashback YouTube example:
https://www.youtube.com/watch?v=bsv2MiInry4


The KeyBot port is for your keyboard if you install the KeyBot driver for it.
KeyBot Youtube example:
https://www.youtube.com/watch?v=GudlPr_loqA

[ClouD3d]

Yes, use the USB BIOS Flashback port.

Right click on the on the
CROSSBLADE-RANGER-ASUS-1803.CAP file and rename it to CROSBLDR.CAP

75323

Rename file YouTube example:
https://www.youtube.com/watch?v=ERwnCcozz5k

Copy it to a formatted FAT32 USB stick and plug it into the USB BIOS Flashback port.

Press the USB BIOS Flashback button. And it will blink for approximately two minutes.
When the BIOS Flashback button stops blinking it's done.


BIOS Flashback YouTube example:
https://www.youtube.com/watch?v=bsv2MiInry4


The KeyBot port is for your keyboard if you install the KeyBot driver for it.
KeyBot Youtube example:
https://www.youtube.com/watch?v=GudlPr_loqA


Dude I did everything you said and it WORKED! I'm So happy right now I'm using my mobo :D:D:D

THANKS YOU A LOT! you are awesome!