PDA

View Full Version : RYUO 240 pump and fan speed



jrrog1975
11-10-2018, 05:21 PM
I have my RYUO 240 connected to the CPU fan header (per the documentation). In AI Suite (latest version), adjusting the CPU fan speed does nothing. When choosing the RYUO fan, the pump speed is supposed to be adjusted but I think it's adjusting both the fans and the pump. The AI Suite naming is also confusing...where it reads "RYUO fan"...but then states to change the slider to affect the pump speed. Can someone clarify?

Menthol
11-11-2018, 12:25 AM
Since these coolers are so new you may not find anyone here who has one to compare

mdzcpa
11-12-2018, 07:51 PM
This is how I connected my RYUJIN 360. Yours should be similar:

Connect the RYUO fans to the RYOU fan connectors, not the motherboard
Connect the RYOU to the AIO Pump connector on the motherboard

Under AI Suite Fan Expert, RYOU Fan curve will adjust the fans, and AIO Pump curve will adjust the pump

If you do not have a AIO Pump connector on the motherboard, use the CPU Fan. However you will need to make sure you have set Q Fan or other UEFI fan control to disabled otherwise AI Suite will not be able to take control.

Gilgamessh
11-30-2018, 08:25 AM
Hi , i have a Ryujin 240 and when i try to use preset on AI Suite (i have 4 preset) he put all the fans at the maximun speed.
Think i have some bios settings in conflict, where i can find Q Fan settings in z390 strix asus motherboard bios? thx


This is how I connected my RYUJIN 360. Yours should be similar:

Connect the RYUO fans to the RYOU fan connectors, not the motherboard
Connect the RYOU to the AIO Pump connector on the motherboard

Under AI Suite Fan Expert, RYOU Fan curve will adjust the fans, and AIO Pump curve will adjust the pump

If you do not have a AIO Pump connector on the motherboard, use the CPU Fan. However you will need to make sure you have set Q Fan or other UEFI fan control to disabled otherwise AI Suite will not be able to take control.

mdzcpa
11-30-2018, 10:23 PM
Hi , i have a Ryujin 240 and when i try to use preset on AI Suite (i have 4 preset) he put all the fans at the maximun speed.
Think i have some bios settings in conflict, where i can find Q Fan settings in z390 strix asus motherboard bios? thx

Those presets do not work with the RYUJIN or RYUO. Instead start with the a basic preset, then custom adjust the fan curves as you want, including the PUMP and FAN speed of the ROG Cooler. Then safe those settings to a CUSTOM Profile. You can save various profiles.

Also, I find the CPU Fan header is more effective and responsive for adjusting the Pump speed. Connect to the CPU fan header if you find the AIO header is not responsive enough.

faxfan2002
12-08-2018, 09:45 PM
I've just check the RYUO on my system (several weeks after install!) and the AIO PUMP is in smart mode running at 100%, I assume there is no hard in running the pump at 100% (the system is not on 24/7 or anything - maybe a few hours a day)?

Menthol
12-08-2018, 10:25 PM
I run the pump at 100% constantly on every AIO I have used except EK

mdzcpa
12-08-2018, 11:40 PM
I've just check the RYUO on my system (several weeks after install!) and the AIO PUMP is in smart mode running at 100%, I assume there is no hard in running the pump at 100% (the system is not on 24/7 or anything - maybe a few hours a day)?


Likely no harm done. I run mine on a fan curve to make my system absolutely silent during desktop chores.

Gofran
02-02-2019, 12:46 AM
please help i have two noctua fans connected to y but the fans keep going full what can i do provide picture or step by step please

mdzcpa
02-02-2019, 03:46 PM
please help i have two noctua fans connected to y but the fans keep going full what can i do provide picture or step by step please


I provided answers directly to your own thread here: https://rog.asus.com/forum/showthread.php?108656

bigbosspc
04-03-2019, 01:43 PM
I'm also not sure AI suite is properly setting my water pump speeds to 100%. In AI suite I see 3 options:

CPU FAN
ROG RYUJIN FAN 1
ROG RYUJIN FAN 2

I've set Q FAN to disable control of the CPU FAN (connected to the AIO).

Am I suppose to set the CPU Fan in AI Suite to 100% or one of the ROG Ryujin Fan X options to 100% so my pump runs full speed ?