PDA

View Full Version : RIVE LGA2011 in Lian Li X2000FB with Noctua NH-D14 SE2011 - Airflow?



EvilCensor
03-21-2012, 04:27 PM
Have some concerns and turn once again to you guys, the capacitors above the CPU nor the heat sink above them look to me like they will have much if any airflow once I install the Noctua. Considering that the PC will be on for very long periods of time with no over clocking to begin with - do you think things will be okay?

6917

6918

Area 66
03-21-2012, 04:43 PM
The Noctua and the rear fan should provide enough air, you don't need to blow the heat sink, a small displacement of air is enough, the important is to not have stagnant air .

EvilCensor
03-21-2012, 07:17 PM
Thanks for the info :)

EvilCensor
03-21-2012, 07:23 PM
Deleted and moved to another forum, sorry.

Giannis996
04-03-2012, 08:13 PM
more pics here plz its awesome !!

Latin_Mist
04-03-2012, 08:32 PM
Where can I go to learn how to fully use RIVE?. I'm new to the game

Zka17
04-03-2012, 11:22 PM
From the pictures you provided, can't figure out how you planned the airflow on that area. I can se that you have a fan in the back and some holes above the cpu. My question is, how you want to orient the Noctua heatsink? Will blow from front to back or from bottom to up? In either case you must keep the airflow direction on the fan inline with the heatsink, but you can inverse the other one (as an intake). I would place the Noctua to blow backward, the rear fan to exhaust and the top fan to intake. Maybe, also use a deflector for the top fan to blow toward the motherboard...