PDA

View Full Version : Preview: Sabertooth Z77 Motherboard



_
03-28-2012, 01:57 PM
The TUF team has put together its latest Sabertooth Z77 featuring a refined Thermal Armor and Thermal Radar combo, as well as unique dust proof covers for the PCI-Express and DIMM slots. If you’ve never encountered a TUF motherboard before, they are designed to prioritize cooling even in the most hot and arid or humid computing environments.

Read more about TUF tech here (http://event.asus.com/2011/mb/TUF/index.htm) and we’ve also published an unboxing article for the Sabertooth Z77 (http://rog.asus.com/85252012/guides/unboxing-the-sabertooth-z77-motherboard/) as well.

http://rog.asus.com/wp-content/uploads/2012/03/sabertooth-z77-13.jpg


Like its P67 older brother, the Sabertooth Z77 has – on the surface – the same Thermal Armor covering the main PCB. Looks can be decieving though, because underneath it’s been upgraded with two separate airflow zones; one covering the two sets of VRM heatsinks in the top corner, and the other venting over the Z77 PCH to keep it cool when no other case airflow is present.

The Thermal Armor is also extended with (bundled) PCI-Express slot covers that easily pop into spare slots to keep the dust out, and two dummy DIMMs if you only run a pair instead of all four. In addition to keeping out the dust, this helps limit corrosion if you live in a particularly humid environment. Check back soon as we’ll be putting together a video to demonstrate this feature.

http://rog.asus.com/wp-content/uploads/2012/03/sabertooth-z77-thermal-armor-dimm.jpg

http://rog.asus.com/wp-content/uploads/2012/03/sabertooth-z77-thermal-armor-pcie.jpg

The USB pin-outs along the bottom also have dust covers too, while the ports along the right hand side are nestled into the Thermal Armor. There’s even a right-angled front panel USB 3.0 connector above the eight SATA ports. Sitting above the ATX socket the MemOK button just in shot too.

http://rog.asus.com/wp-content/uploads/2012/03/sabertooth-z77-2.jpg

The Thermal Armor area for the VRM heatsinks can drop a fan under the screw flap at the top, with air blown through either side of the CPU socket and through holes in the PCB to cool the rear of the socket. This ensures the heatsinks and components are kept cooler even in zero airflow environments. The second, four screw flap beneath the CPU socket can also be removed to allow another (bundled) fan to sit and push air down towards the Z77 heatsink.

http://rog.asus.com/wp-content/uploads/2012/03/sabertooth-z77-5.jpg

Below we can see that tucked in the top are three fan headers, and the 8-pin EPS 12V CPU power socket.

http://rog.asus.com/wp-content/uploads/2012/03/sabertooth-z77-1.jpg

The Sabertooth Z77 supports up to 3-way SLI and CrossFireX with PCI-Express 3.0 if a 3rd generation Intel Core processor is used. A PCI-Express 1x slot is placed above the top 16x graphics slot so that even when multi-GPU is being used there is still space for a sound card or WiFi for example.

http://rog.asus.com/wp-content/uploads/2012/03/sabertooth-z77-4.jpg

_
03-28-2012, 01:57 PM
How the Sabertooth Z77 looks underneath. The gap in the VRM heatsink is where the Thermal Armor directs the airflow into the heatsinks.

http://rog.asus.com/wp-content/uploads/2012/03/sabertooth-z77-naked-3.jpg

Here is a demonstration of the two fans fitted; one in the rear I/O and another in the center.

http://rog.asus.com/wp-content/uploads/2012/03/sabertooth-z77-fan.jpg
http://rog.asus.com/wp-content/uploads/2012/03/sabertooth-z77-fan2.jpg

The red circles in the pictures below highlight holes where the air can escape through to the back of the PCB. Four near the CPU socket and two directly below the center fan, helping to vent the PCB behind.

http://rog.asus.com/wp-content/uploads/2012/03/sabertooth-z77-naked-1.jpg
http://rog.asus.com/wp-content/uploads/2012/03/sabertooth-z77-naked-2.jpg


http://rog.asus.com/wp-content/uploads/2012/03/sabertooth-z77-model1-562x799.jpg

Corssair
03-28-2012, 08:22 PM
Could someone please tell me the model's name? Sorry guys she just seem a bit more interesting than mobos :P

Ceadderman
03-29-2012, 07:36 AM
well forget water cooling the NB and Mosfets on this board. Might as well forget using FC block on it at all.

Looks really nice and has some great ideas considering all the dust covers the board comes with. Still if you have any designs on a completely water cooled system forget about it. :p:p:p

I believe that's the x79 Sabertooth. I could be wrong cause the model is pretty fetching. :D

~Ceadder