PDA

View Full Version : AURA: RAM DIMMS (TEAMFORCE ARGB) are not bright enough



Bakarilos
02-18-2021, 10:18 AM
HI all,

I have a curious issue and i will reach out to ASUS official just in case.
i made an RGB build based on ASUS AURA SYNC..
i believe it is a MOTHERBOARD issue and not specific to armoury crate
The ram is from TEAMFORCE XTREEM ARGB
https://www.teamgroupinc.com/en/product/xtreem-argb-ddr4

I can control the Ram through the Armory crate, but then i lose ability to individually control it like the old Aura APP
The second problem is A catastrophe and not related to AURA!

The problem is that the DIMMS are not bright enough and the light appears to very darl.
At first, i thought that the DIMMS are faulty. i used them on an older motherboard from MSI (x99a) and to my surprise when i turned it on the light was completely different.
I contacted TEAMGROUP and asked for advice. They told me to contact ASUS directly. So here i am
I am posting some pictures of my ASUS build on Zen3 and some of my old pc with the new DIMMS installed. You can see the difference in the light and brightness produced. In the MSI motherboard the light proves to be normal, while the asus is TOO DARK!
87899
8790087901
87902