PDA

View Full Version : RGB Lights don't work on ROG Strix B550-I



flagrant99
04-20-2021, 01:51 AM
ASUIS ROG Strix B550-I
Armoury Crate 4.0.8.0

Error Message:
No ARGB Gen 2 devices detected.

Cooler Master MasterFan MF140 Halo Duo-Ring Addressable RGB Lighting 140mm Fan
ASUS AURA Addressable Gen 2 Header
is the 3 pin (not 4 pin header) on mobo.

All I see is slight green light on fan.
In crate when I switch from gen 2 to gen 1 sometimes it lights up rainbow or nothng.

When scan always says nothing detected.

How do I get lighting to work?

BigJohnny
04-20-2021, 02:19 AM
I dont think its the lighting as much as it is the software. The only thing I was able to get to actually work were strips.
Is it one fan or multiples?
Try one at a time. One bad LED ruins it for everything in the string.

flagrant99
04-20-2021, 02:32 AM
I tried each fan by itself. Each one shows a little bit of green and that's it. I also tried the strips but nothing comes on at all. Also when I click Gen 1 in Armoury Crate I see rainbow (all colors) for a few seconds. So I know the fans are OK.

flagrant99
04-20-2021, 12:19 PM
So I tried to uninstall aura because I read some where it doesn't work with Armory crate. Then realized there are like 50 pieces of software band aided together somehow and I made a mess. Then I did the uninstall tool. The then Install tool. Check for Updates doesn't work anymore. It shows nothing below it. What/how to fix

Item Version
---- -------
Armoury Crate UWP App 4.0.8.0
ROG Live Service 1.2.5.0
AURA Service (Lighting Service) 3.04.35
Armoury Crate lite service 4.0.12
ASUS AIOFan HAL 1.1.26
ASUS AURA Extension Card HAL 1.1.0.6
ASUS AURA Motherboard HAL 1.1.4.0
AacVGA 0.0.3.1
KingstonDram 1.1.6
AURA DRAM Component 1.1.08
ENE RGB HAL 1.1.31.3
PHISON HAL 1.0.6.0
Patriot Viper DRAM RGB 1.0.9.1
Patriot Viper M2 SSD RGB 1.0.6.3
Universal Holtek RGB DRAM 1.0.0.1
WD_BLACK AN1500 1.0.12.0

flagrant99
04-20-2021, 10:07 PM
The LightingService service terminated unexpectedly. It has done this 4 time(s).

DCOM got error "2" attempting to start the service asComSvc with arguments "Unavailable" in order to run the server:
{2627F8BE-4482-4081-BC62-8A12CA24BDF8}


Faulting application name: LightingService.exe, version: 0.0.0.0, time stamp: 0x603f5dd5
Faulting module name: KERNELBASE.dll, version: 10.0.19041.906, time stamp: 0x26452a2a
Exception code: 0x0eedfade
Fault offset: 0x0012a6e2
Faulting process id: 0x1b70
Faulting application start time: 0x01d736314e674500
Faulting application path: C:\Program Files (x86)\LightingService\LightingService.exe
Faulting module path: C:\Windows\System32\KERNELBASE.dll
Report Id: cda20757-3536-4ef5-a1f2-ac87b2ce33d6
Faulting package full name:
Faulting package-relative application ID:


Faulting application name: ArmouryCrate.exe, version: 0.0.0.0, time stamp: 0x6049a7b6
Faulting module name: KERNELBASE.dll, version: 10.0.19041.906, time stamp: 0x2f2f77bf
Exception code: 0xc000027b
Fault offset: 0x000000000010b2dc
Faulting process id: 0x21a4
Faulting application start time: 0x01d736311958b36e
Faulting application path: C:\Program Files\WindowsApps\B9ECED6F.ArmouryCrate_4.0.8.0_x6 4__qmba6cd70vzyy\ArmouryCrate.exe
Faulting module path: C:\Windows\System32\KERNELBASE.dll
Report Id: 5cf885a9-b277-493e-b3ae-2014b6b5423f
Faulting package full name: B9ECED6F.ArmouryCrate_4.0.8.0_x64__qmba6cd70vzyy
Faulting package-relative application ID: App

flagrant99
04-20-2021, 10:47 PM
C:\Program Files (x86)\ASUS
AsusCertService
AXSP

Are required by by ArmouryCrate but it does not install them.
So as big as it is. It still does not install everything it needs.

My guess is they come the bios generated files
C:\Windows\System32\DriverStore\FileRepository\rog ms.inf_amd64_1a94f31cfc8b0438\ArmouryLiveUpdate.ex e
C:\Windows\System32\DriverStore\FileRepository\rog ms.inf_amd64_1a94f31cfc8b0438\ArmouryUpdate.exe

So instead of installing from ArmouryCrateInstaller v3.0.11.0.exe probably better off installing from driver store?

flagrant99
04-20-2021, 10:53 PM
Any body know why no ARGB header is getting written to devicehaldetect.xml?

C:\ProgramData\ASUS\ARMOURY CRATE Diagnosis\detectdll

devicehaldetect.xml Contents


<?xml version="1.0" encoding="UTF-8" standalone="no" ?>
<root>
<device key="MB">
<lightingdevicetype>0x10000</lightingdevicetype>
<name>ROG STRIX B550-I GAMING</name>
<guid>E7C8DA76-C9B9-4297-8681-DD878330AFE7</guid>
<count>1</count>
<gen2support>0</gen2support>
</device>
<device key="RGB">
<lightingdevicetype>0x00000</lightingdevicetype>
<name>RGB HEADER</name>
<guid>E7C8DA76-C9B9-4297-8681-DD878330AFE7</guid>
<count>1</count>
<gen2support>0</gen2support>
</device>
</root>


I have nothing plugged in to the RGB Gen 1 Header. But it got detected.
The Gen 2 did not.

On the internet someone else posted one with it in this file
<device key="ARGB"><lightingdevicetype>0x11000</lightingdevicetype><name>ARGB HEADER</name><guid>E7C8DA76-C9B9-4297-8681-DD878330AFE7</guid><count>1</count><gen2support>0</gen2support></device></

So my guess is This software doesn't work with my ROG Strix B550-II? or it's broken?

flagrant99
04-21-2021, 01:23 AM
021-04-20 20:57:39,230 P:7836 T:8896 | devicehaldetect.cpp:757 AacHalDetect D : ::::::::before execute ArgbHeaderDetect()...
2021-04-20 20:57:39,230 P:7836 T:8896 | devicehaldetect.cpp:58 gEnterMBMutex D : [[[[request]]]]MBMutex...
2021-04-20 20:57:39,230 P:7836 T:8896 | devicehaldetect.cpp:63 gEnterMBMutex D : [[[[acquired]]]]MBMutex...
2021-04-20 20:57:39,230 P:7836 T:8896 | usbhid.cpp:41 gs::UsbHidEnumHelp<class gs::UsbHidControlWithPatch>::Enumerate D : (PID, VID)=(b05, 1867)
2021-04-20 20:57:39,231 P:7836 T:8896 | usbhid.cpp:41 gs::UsbHidEnumHelp<class gs::UsbHidControlWithPatch>::Enumerate D : (PID, VID)=(b05, 1872)
2021-04-20 20:57:39,231 P:7836 T:8896 | usbhid.cpp:41 gs::UsbHidEnumHelp<class gs::UsbHidControlWithPatch>::Enumerate D : (PID, VID)=(b05, 18a3)
2021-04-20 20:57:39,231 P:7836 T:8896 | usbhid.cpp:41 gs::UsbHidEnumHelp<class gs::UsbHidControlWithPatch>::Enumerate D : (PID, VID)=(b05, 18a5)
2021-04-20 20:57:39,231 P:7836 T:8896 | usbhid.cpp:41 gs::UsbHidEnumHelp<class gs::UsbHidControlWithPatch>::Enumerate D : (PID, VID)=(b05, 18bb)
2021-04-20 20:57:39,231 P:7836 T:8896 | usbhid.cpp:41 gs::UsbHidEnumHelp<class gs::UsbHidControlWithPatch>::Enumerate D : (PID, VID)=(b05, 190b)
2021-04-20 20:57:39,231 P:7836 T:8896 | usbhid.cpp:41 gs::UsbHidEnumHelp<class gs::UsbHidControlWithPatch>::Enumerate D : (PID, VID)=(b05, 18f3)
2021-04-20 20:57:39,231 P:7836 T:8896 | usbhid.cpp:41 gs::UsbHidEnumHelp<class gs::UsbHidControlWithPatch>::Enumerate D : (PID, VID)=(b05, 18b8)
2021-04-20 20:57:39,232 P:7836 T:8896 | usbhid.cpp:41 gs::UsbHidEnumHelp<class gs::UsbHidControlWithPatch>::Enumerate D : (PID, VID)=(b05, 1939)
2021-04-20 20:57:39,232 P:7836 T:8896 | usbhid.cpp:46 gs::UsbHidEnumHelp<class gs::UsbHidControlWithPatch>::Enumerate D : [HIT]-->(PID, VID)=(b05, 1939)
2021-04-20 20:57:39,232 P:7836 T:8896 | usbhid.cpp:41 gs::UsbHidEnumHelp<class gs::UsbHidControlWithPatch>::Enumerate D : (PID, VID)=(b05, 19af)
2021-04-20 20:57:39,232 P:7836 T:8896 | mbhaldetect.cpp:560 checkARGBHeaderFromUsbSolution D : [ARGB is Finding] 6k7750 (vid, pid) --> (B05, 1939)
2021-04-20 20:57:39,232 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,232 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,235 P:7836 T:8896 | st9615.cpp:467 gs::ST9615::readAura50 D : readAura50:Write cmd:3, T:0
2021-04-20 20:57:39,246 P:7836 T:8896 | st9615.cpp:473 gs::ST9615::readAura50 D : readAura50:Read cmd:3, T:16
2021-04-20 20:57:39,246 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,246 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,246 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,249 P:7836 T:8896 | st9615.cpp:467 gs::ST9615::readAura50 D : readAura50:Write cmd:2, T:0
2021-04-20 20:57:39,258 P:7836 T:8896 | st9615.cpp:473 gs::ST9615::readAura50 D : readAura50:Read cmd:2, T:15
2021-04-20 20:57:39,258 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,258 P:7836 T:8896 | mbhaldetect.cpp:594 checkARGBHeaderFromUsbSolution D : 6k7750 FW version: AULA3-AR42-0207 Config version: 3 Config subversion: 0 Spec subversion: 18
2021-04-20 20:57:39,258 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,258 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,261 P:7836 T:8896 | st9615.cpp:467 gs::ST9615::readAura50 D : readAura50:Write cmd:30, T:0
2021-04-20 20:57:39,270 P:7836 T:8896 | st9615.cpp:473 gs::ST9615::readAura50 D : readAura50:Read cmd:30, T:16
2021-04-20 20:57:39,270 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,270 P:7836 T:8896 | mbhaldetect.cpp:655 checkARGBHeaderFromUsbSolution D : Version >= 0x16:1
2021-04-20 20:57:39,270 P:7836 T:8896 | mbhaldetect.cpp:667 checkARGBHeaderFromUsbSolution D : header_0 enable: 1, type: 2
2021-04-20 20:57:39,270 P:7836 T:8896 | mbhaldetect.cpp:687 checkARGBHeaderFromUsbSolution D : header_0 is gen2
2021-04-20 20:57:39,270 P:7836 T:8896 | st9615.cpp:582 gs::ST9615::enterMutex_getInfoByIndex D : [[[[request]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,270 P:7836 T:8896 | st9615.cpp:587 gs::ST9615::enterMutex_getInfoByIndex D : [[[[acquired]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,270 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,270 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,273 P:7836 T:8896 | st9615.cpp:518 gs::ST9615::sendDataAura50 D : sendDataAura50:Write cmd:31, T:0
2021-04-20 20:57:39,273 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,273 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,273 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,277 P:7836 T:8896 | st9615.cpp:467 gs::ST9615::readAura50 D : readAura50:Write cmd:31, T:0
2021-04-20 20:57:39,286 P:7836 T:8896 | st9615.cpp:473 gs::ST9615::readAura50 D : readAura50:Read cmd:31, T:15
2021-04-20 20:57:39,286 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,286 P:7836 T:8896 | st9615.cpp:626 gs::ST9615::leaveMutex_getInfoByIndex D : [[[[release]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,286 P:7836 T:8896 | mbhaldetect.cpp:693 checkARGBHeaderFromUsbSolution D : unit:16 < 32, led type:32, 0
2021-04-20 20:57:39,286 P:7836 T:8896 | st9615.cpp:582 gs::ST9615::enterMutex_getInfoByIndex D : [[[[request]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,286 P:7836 T:8896 | st9615.cpp:587 gs::ST9615::enterMutex_getInfoByIndex D : [[[[acquired]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,286 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,286 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,289 P:7836 T:8896 | st9615.cpp:518 gs::ST9615::sendDataAura50 D : sendDataAura50:Write cmd:31, T:0
2021-04-20 20:57:39,289 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,289 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,289 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,293 P:7836 T:8896 | st9615.cpp:467 gs::ST9615::readAura50 D : readAura50:Write cmd:31, T:0
2021-04-20 20:57:39,302 P:7836 T:8896 | st9615.cpp:473 gs::ST9615::readAura50 D : readAura50:Read cmd:31, T:16
2021-04-20 20:57:39,302 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,302 P:7836 T:8896 | st9615.cpp:626 gs::ST9615::leaveMutex_getInfoByIndex D : [[[[release]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,302 P:7836 T:8896 | mbhaldetect.cpp:693 checkARGBHeaderFromUsbSolution D : unit:17 < 32, led type:32, 0
2021-04-20 20:57:39,302 P:7836 T:8896 | st9615.cpp:582 gs::ST9615::enterMutex_getInfoByIndex D : [[[[request]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,302 P:7836 T:8896 | st9615.cpp:587 gs::ST9615::enterMutex_getInfoByIndex D : [[[[acquired]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,302 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,302 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,305 P:7836 T:8896 | st9615.cpp:518 gs::ST9615::sendDataAura50 D : sendDataAura50:Write cmd:31, T:0
2021-04-20 20:57:39,305 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,305 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,305 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,309 P:7836 T:8896 | st9615.cpp:467 gs::ST9615::readAura50 D : readAura50:Write cmd:31, T:0
2021-04-20 20:57:39,318 P:7836 T:8896 | st9615.cpp:473 gs::ST9615::readAura50 D : readAura50:Read cmd:31, T:16
2021-04-20 20:57:39,318 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,318 P:7836 T:8896 | st9615.cpp:626 gs::ST9615::leaveMutex_getInfoByIndex D : [[[[release]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,318 P:7836 T:8896 | mbhaldetect.cpp:693 checkARGBHeaderFromUsbSolution D : unit:18 < 32, led type:32, 0
2021-04-20 20:57:39,318 P:7836 T:8896 | st9615.cpp:582 gs::ST9615::enterMutex_getInfoByIndex D : [[[[request]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,318 P:7836 T:8896 | st9615.cpp:587 gs::ST9615::enterMutex_getInfoByIndex D : [[[[acquired]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,318 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,318 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,321 P:7836 T:8896 | st9615.cpp:518 gs::ST9615::sendDataAura50 D : sendDataAura50:Write cmd:31, T:0
2021-04-20 20:57:39,321 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,321 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,321 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,325 P:7836 T:8896 | st9615.cpp:467 gs::ST9615::readAura50 D : readAura50:Write cmd:31, T:0
2021-04-20 20:57:39,334 P:7836 T:8896 | st9615.cpp:473 gs::ST9615::readAura50 D : readAura50:Read cmd:31, T:15
2021-04-20 20:57:39,334 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,334 P:7836 T:8896 | st9615.cpp:626 gs::ST9615::leaveMutex_getInfoByIndex D : [[[[release]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,334 P:7836 T:8896 | mbhaldetect.cpp:693 checkARGBHeaderFromUsbSolution D : unit:19 < 32, led type:32, 0
2021-04-20 20:57:39,334 P:7836 T:8896 | st9615.cpp:582 gs::ST9615::enterMutex_getInfoByIndex D : [[[[request]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,334 P:7836 T:8896 | st9615.cpp:587 gs::ST9615::enterMutex_getInfoByIndex D : [[[[acquired]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,334 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,334 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,337 P:7836 T:8896 | st9615.cpp:518 gs::ST9615::sendDataAura50 D : sendDataAura50:Write cmd:31, T:0
2021-04-20 20:57:39,337 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,337 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,337 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,341 P:7836 T:8896 | st9615.cpp:467 gs::ST9615::readAura50 D : readAura50:Write cmd:31, T:0
2021-04-20 20:57:39,350 P:7836 T:8896 | st9615.cpp:473 gs::ST9615::readAura50 D : readAura50:Read cmd:31, T:16
2021-04-20 20:57:39,350 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,350 P:7836 T:8896 | st9615.cpp:626 gs::ST9615::leaveMutex_getInfoByIndex D : [[[[release]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,350 P:7836 T:8896 | mbhaldetect.cpp:693 checkARGBHeaderFromUsbSolution D : unit:20 < 32, led type:32, 0
2021-04-20 20:57:39,350 P:7836 T:8896 | st9615.cpp:582 gs::ST9615::enterMutex_getInfoByIndex D : [[[[request]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,350 P:7836 T:8896 | st9615.cpp:587 gs::ST9615::enterMutex_getInfoByIndex D : [[[[acquired]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,350 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,350 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,353 P:7836 T:8896 | st9615.cpp:518 gs::ST9615::sendDataAura50 D : sendDataAura50:Write cmd:31, T:0
2021-04-20 20:57:39,353 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,353 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,353 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,357 P:7836 T:8896 | st9615.cpp:467 gs::ST9615::readAura50 D : readAura50:Write cmd:31, T:0
2021-04-20 20:57:39,366 P:7836 T:8896 | st9615.cpp:473 gs::ST9615::readAura50 D : readAura50:Read cmd:31, T:16
2021-04-20 20:57:39,366 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,366 P:7836 T:8896 | st9615.cpp:626 gs::ST9615::leaveMutex_getInfoByIndex D : [[[[release]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,366 P:7836 T:8896 | mbhaldetect.cpp:693 checkARGBHeaderFromUsbSolution D : unit:21 < 32, led type:32, 0
2021-04-20 20:57:39,366 P:7836 T:8896 | st9615.cpp:582 gs::ST9615::enterMutex_getInfoByIndex D : [[[[request]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,366 P:7836 T:8896 | st9615.cpp:587 gs::ST9615::enterMutex_getInfoByIndex D : [[[[acquired]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,366 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,366 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,369 P:7836 T:8896 | st9615.cpp:518 gs::ST9615::sendDataAura50 D : sendDataAura50:Write cmd:31, T:0
2021-04-20 20:57:39,369 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,369 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,369 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,373 P:7836 T:8896 | st9615.cpp:467 gs::ST9615::readAura50 D : readAura50:Write cmd:31, T:0
2021-04-20 20:57:39,382 P:7836 T:8896 | st9615.cpp:473 gs::ST9615::readAura50 D : readAura50:Read cmd:31, T:15
2021-04-20 20:57:39,382 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,382 P:7836 T:8896 | st9615.cpp:626 gs::ST9615::leaveMutex_getInfoByIndex D : [[[[release]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,382 P:7836 T:8896 | mbhaldetect.cpp:693 checkARGBHeaderFromUsbSolution D : unit:22 < 32, led type:32, 0
2021-04-20 20:57:39,382 P:7836 T:8896 | st9615.cpp:582 gs::ST9615::enterMutex_getInfoByIndex D : [[[[request]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,382 P:7836 T:8896 | st9615.cpp:587 gs::ST9615::enterMutex_getInfoByIndex D : [[[[acquired]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,382 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,382 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,385 P:7836 T:8896 | st9615.cpp:518 gs::ST9615::sendDataAura50 D : sendDataAura50:Write cmd:31, T:0
2021-04-20 20:57:39,385 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,385 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,385 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,389 P:7836 T:8896 | st9615.cpp:467 gs::ST9615::readAura50 D : readAura50:Write cmd:31, T:0
2021-04-20 20:57:39,398 P:7836 T:8896 | st9615.cpp:473 gs::ST9615::readAura50 D : readAura50:Read cmd:31, T:16
2021-04-20 20:57:39,398 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,398 P:7836 T:8896 | st9615.cpp:626 gs::ST9615::leaveMutex_getInfoByIndex D : [[[[release]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,398 P:7836 T:8896 | mbhaldetect.cpp:693 checkARGBHeaderFromUsbSolution D : unit:23 < 32, led type:32, 0
2021-04-20 20:57:39,398 P:7836 T:8896 | st9615.cpp:582 gs::ST9615::enterMutex_getInfoByIndex D : [[[[request]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,398 P:7836 T:8896 | st9615.cpp:587 gs::ST9615::enterMutex_getInfoByIndex D : [[[[acquired]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,398 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,398 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,401 P:7836 T:8896 | st9615.cpp:518 gs::ST9615::sendDataAura50 D : sendDataAura50:Write cmd:31, T:0
2021-04-20 20:57:39,401 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,401 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,401 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,405 P:7836 T:8896 | st9615.cpp:467 gs::ST9615::readAura50 D : readAura50:Write cmd:31, T:0
2021-04-20 20:57:39,414 P:7836 T:8896 | st9615.cpp:473 gs::ST9615::readAura50 D : readAura50:Read cmd:31, T:15
2021-04-20 20:57:39,414 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,414 P:7836 T:8896 | st9615.cpp:626 gs::ST9615::leaveMutex_getInfoByIndex D : [[[[release]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,414 P:7836 T:8896 | mbhaldetect.cpp:693 checkARGBHeaderFromUsbSolution D : unit:24 < 32, led type:32, 0
2021-04-20 20:57:39,414 P:7836 T:8896 | st9615.cpp:582 gs::ST9615::enterMutex_getInfoByIndex D : [[[[request]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,414 P:7836 T:8896 | st9615.cpp:587 gs::ST9615::enterMutex_getInfoByIndex D : [[[[acquired]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,414 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,414 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,417 P:7836 T:8896 | st9615.cpp:518 gs::ST9615::sendDataAura50 D : sendDataAura50:Write cmd:31, T:0
2021-04-20 20:57:39,417 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,417 P:7836 T:8896 | st9615.cpp:527 gs::ST9615::enterMutex D : [[[[request]]]]m_mutex...
2021-04-20 20:57:39,417 P:7836 T:8896 | st9615.cpp:532 gs::ST9615::enterMutex D : [[[[acquired]]]]m_mutex...
2021-04-20 20:57:39,421 P:7836 T:8896 | st9615.cpp:467 gs::ST9615::readAura50 D : readAura50:Write cmd:31, T:0
2021-04-20 20:57:39,430 P:7836 T:8896 | st9615.cpp:473 gs::ST9615::readAura50 D : readAura50:Read cmd:31, T:16
2021-04-20 20:57:39,430 P:7836 T:8896 | st9615.cpp:572 gs::ST9615::leaveMutex D : [[[[release]]]]m_mutex...
2021-04-20 20:57:39,430 P:7836 T:8896 | st9615.cpp:626 gs::ST9615::leaveMutex_getInfoByIndex D : [[[[release]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,430 P:7836 T:8896 | mbhaldetect.cpp:693 checkARGBHeaderFromUsbSolution D : unit:25 < 32, led type:32, 0
2021-04-20 20:57:39,430 P:7836 T:8896 | st9615.cpp:582 gs::ST9615::enterMutex_getInfoByIndex D : [[[[request]]]]m_mutex_getInfoByIndex...
2021-04-20 20:57:39,430 P:7836 T:8896 | st9615.cpp:587 gs::ST9615::enterMutex_getInfoByIndex D : [[[[acquired]]]]m_mutex_getInfoByIndex...

flagrant99
04-21-2021, 01:28 AM
I couldn't post the whole log but devicehaldetect.log appears to be talking to something over argb. Why does the xml file act as if it doesn't exist?

FlufflePuff1337
04-21-2021, 10:19 AM
gen 2 never worked for me either i dont think its cos i have everything attached to 1 hub via 1 header, cos my 2e header is only 1 strip of 28 argb leds from my rog certified case, surely that should be detected least, anyway neither is detected and it pisses me off, armoury crate already lacks ability to adress rgb properly and then it runs like crap to with extra cpu utilization if you have g skill rgb memory

i have x570-e and vardar d rgb fans those are gen 2 header, currently i run 9 of them on a hub cos 1 of the 10 fans made to much noise i removed it, im getting replacement next week.

flagrant99
04-21-2021, 11:45 AM
I have G.Skill 32GB DDR4 Trident Z Royal Silver 3200Mhz PC4-25600 CL16 1.35V Dual Channel Kit (2x16GB)
and it just showed up in my devicehaldetect.xml as EneTech.

<device key="DRAM">
<lightingdevicetype>0x70000</lightingdevicetype>
<name>EneTech</name>
<guid>05B8E7A3-7D5D-41DE-B6CC-5E6205837FB7</guid>
<count>2</count>
<gen2support>0</gen2support>
</device>

Aura Effects work for me. And I don't see any CPU Utilization.
So for me the RAM is working.

Not the ARGB header though.

I ordered a Cooler Master (Non Software Version) ARGB controller so I can test my Fans, and at least get them to do a plain color or something.

Anybody know what AULA3-AR42-0207 is?

Also I am pretty sure from the log it is counting the LED's on my ARGB fan.

2021-04-20 20:57:39,286 P:7836 T:8896 | mbhaldetect.cpp:693 checkARGBHeaderFromUsbSolution D : unit:16 < 32, led type:32, 0
2021-04-20 20:57:39,302 P:7836 T:8896 | mbhaldetect.cpp:693 checkARGBHeaderFromUsbSolution D : unit:17 < 32, led type:32, 0
2021-04-20 20:57:39,318 P:7836 T:8896 | mbhaldetect.cpp:693 checkARGBHeaderFromUsbSolution D : unit:18 < 32, led type:32, 0

So It's not the hardware.

flagrant99
04-21-2021, 11:28 PM
I got the Cooler Master A-RGB LED SMALL CONTROLLER and my fans work fine with it. So I can set My fans using button, change colors, etc. Using Cooler Master Software that communicates through USB works fine as well.

There is a pass through mode button to enable Mother Board to take over. And it goes back to the slight green.

Armory Create see nothing and it keeps setting the MB xml as not supporting Gen 2.

<gen2support>0</gen2support>

The bios has all LED on.

flagrant99
04-22-2021, 09:53 PM
So it turns out my fans are ARGB Gen 1. I had to find out how many LEDS and type in the correct #. Now they work using pass through mode on cooler master controller.

I thought ARGB Header was gen 2. Turns out ARGB Gen 2 header can support GEN 1 and GEN 2 Devices. (Guess you can't mix?)
Guessing GEN 2 can report back how many LEDS it has?

Both LED strips are crap. Neither light up so those are bad and only made trouble shooting worse.