PDA

View Full Version : g75v vs vertex 3 problem



haktas
09-11-2012, 05:47 PM
I just bought a new vertex 3.placed into left slot , formatted both drives.Then i installed windows 7 64 bit.Here the problem starts...
http://img43.imageshack.us/img43/889/asssdl.png
http://minus.com/lU2H6ZNDQoBwg
http://desmond.imageshack.us/Himg571/scaled.php?server=571&filename=hwinfo64.png&res=landing

as you see hwinfo shows as 6 gbits sata port but rapid storage shows as 3 gbits sata2 port.
And in the test also i see that it works as sata 2.
Also problem not finishes with this one windows always hangs up on boot screen with blank.
When hdd led always lights up it means it wont boot :D
bios and vertex firmware latest.All chipset files newest.
How to solve this situation?

karn78
09-11-2012, 07:29 PM
I just bought a new vertex 3.placed into left slot , formatted both drives.Then i installed windows 7 64 bit.Here the problem starts...
http://img43.imageshack.us/img43/889/asssdl.png
http://minus.com/lU2H6ZNDQoBwg
http://desmond.imageshack.us/Himg571/scaled.php?server=571&filename=hwinfo64.png&res=landing

as you see hwinfo shows as 6 gbits sata port but rapid storage shows as 3 gbits sata2 port.
And in the test also i see that it works as sata 2.
Also problem not finishes with this one windows always hangs up on boot screen with blank.
When hdd led always lights up it means it wont boot :D
bios and vertex firmware latest.All chipset files newest.
How to solve this situation?

Your problem is other.
use boot linux ocz tools, (you can find it on ocz forum) and use the fix sate 2 -sata 3.

haktas
09-11-2012, 08:22 PM
when i use fix button (green one) link goes down when i test with hwinfo to 3gbps.
@ default it was 6 gbps , so useless :)