PDA

View Full Version : So i wanted to avoid the power pin issue...



Dragasath
10-15-2012, 10:31 AM
And I bought a cable with a 90 adaptor from amazon but im not really sure if it can hande 7.7A
It looks a bit tiny and on the site i couldn't find any tech informations neither on the cable package. What do you guys think?
http://imageshack.us/photo/photo/687/img20121015122901.jpg/

xeromist
10-15-2012, 06:07 PM
You could try plugging it in for a bit and see if it starts to heat up. If it gets hot then you know there is too much resistance.

Dragasath
10-16-2012, 08:52 AM
Ok, I've tried and it doesn't work like it should, when i stress the notebook a bit, the ac power notification just keeps popping out. :(

Gorman
10-16-2012, 10:14 AM
That's definitely not good!

The problem with the pin is not just that you need to relieve stress on the pin using a 90 degree adapter, but you also need to get a higher rated power supply, the weak ones that ASUS gives out will not cut it.

If the pin is already damaged then it won't help to swap now.