PDA

View Full Version : Cooler Master 690 II Case Mod Project



MonsterMawd
05-20-2011, 04:26 PM
This is the Cooler Master CM 690 case mod project I've started for local customer... He will be doing finishing touches on it....


http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod5.jpg

Hmmm..
http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod3.jpg

Cooler Master CM 690, Before
http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod4.jpg

Hmmm something is different...
http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod2.jpg

MonsterMawd
05-20-2011, 04:27 PM
5.25 bay and rear I/O plate and 3x I/O shields painted "House of Kolor" Kandy Blue

http://www.mnpctech.3dpixelnet.com/picture_library/Surfer_joe_chassis4.JPG

http://www.mnpctech.3dpixelnet.com/picture_library/Surfer_joe_chassis6.JPG

http://www.mnpctech.3dpixelnet.com/picture_library/Surfer_joe_chassis5.JPG

http://www.mnpctech.3dpixelnet.com/picture_library/Surfer_joe_chassis2.JPG

xeromist
05-20-2011, 05:48 PM
lurvely

MonsterMawd
05-20-2011, 11:15 PM
Thank you!

Black Pop Rivets
http://www.mnpctech.com/Pop_rivets_for_computer_case.html

http://www.mnpctech.com/pop_rivet_black_computer_case_chassis_doomed.jpg

Most Computer Chassis will accept 1/8” diameter Pop rivets, Gripe range .092" - .125" for Computers (http://www.mnpctech.com/Pop_rivets_for_computer_case.html).

You can also get Copper Pop Rivets and Rivet Gun from Mnpctech :D

http://www.mnpctech.com/Pop_rivets_for_computer_case.html

http://www.mnpctech.com/copper_blind_pc_case_pop_rivet_mnpctech.com.jpg

http://www.mnpctech.com/pop_rivet_blind_tool_gun_computer_case_chassis.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/Surfer_joe_chassis8_black_computer_case_rivet2.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/Surfer_joe_chassis8_black_computer_case_rivet3.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/Surfer_joe_chassis8_black_computer_case_rivet4.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/Surfer_joe_chassis8_black_computer_case_rivet5.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/Surfer_joe_chassis8_black_computer_case_rivet6.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/Surfer_joe_chassis8_black6.blue.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/Surfer_joe_chassis8_black7.blue.jpg

MonsterMawd
05-22-2011, 09:52 PM
2x 120mm machined fan/rad grill (http://www.performance-pcs.com/catalog/index.php?main_page=index&cPath=59_362_540) Mnpctech makes for PPCs. Joe may go with Anodized Black version instead, I'll piece everything together first and he can decide.

http://www.mnpctech.3dpixelnet.com/picture_library/Surfer_joe_chassis8_black_690_window1.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/Surfer_joe_chassis8_black_690_window2.jpg

MonsterMawd
05-24-2011, 09:56 PM
Here is the window shown with Black Anodized 2x120mm Radiator Grill (http://www.performance-pcs.com/catalog/index.php?main_page=index&cPath=59_362_540) from PPCs

http://www.mnpctech.3dpixelnet.com/picture_library/Surfer_joe_chassis8_black9a.blue.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/Surfer_joe_chassis8_black9b.blue.jpg

MonsterMawd
05-25-2011, 12:41 PM
The 140mm intake in the floor will be relocated to bottom of the chassis, so I've made spacers to raise the 690. These are milled from 3/4" thick aluminum

http://www.mnpctech.3dpixelnet.com/picture_library/Surfer_joe_chassis8_black6.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/Surfer_joe_chassis8_black7.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/Surfer_joe_chassis8_black8.jpg

These Black Anodized Thumbscrews (http://www.mnpctech.com/thumbscrew.html) look really nice with the custom painted Cooler Master 690 chassis
http://www.mnpctech.com/black_anodized_computer_thumb_screw_mnpctech.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod6.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod7.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod8.jpg

pcjunkie209
05-25-2011, 07:15 PM
Looking good Bill!

MonsterMawd
05-26-2011, 11:53 AM
Thank you!!!

CM690 spacers and feet anodized Black

http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod9a.jpg

CM690 spacers and feet installed

http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod9b.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod9c.jpg
The outter edge of the feet will be flush with the side panels.

http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod9d.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod9e.jpg

MonsterMawd
05-26-2011, 03:57 PM
The access side panel window mounted.

http://www.mnpctech.3dpixelnet.com/picture_library/coolermaster_690_case_pc_mod_mnpctech1.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/coolermaster_690_case_pc_mod_mnpctech2.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/coolermaster_690_case_pc_mod_mnpctech3.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/coolermaster_690_case_pc_mod_mnpctech4.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/coolermaster_690_case_pc_mod_mnpctech5.jpg

MonsterMawd
05-28-2011, 11:48 AM
Joe has interesting ideas.. These are the fan controllers I picked up from surferjoe's office last week....

NZXT Sentry LX
http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod9_Optical1.jpg

Scythe KazeMaster
http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod9_Optical2.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod9_Optical8.jpg

MonsterMawd
05-28-2011, 08:32 PM
surferjoe wanted to see what the 120mm Enermax Apollish Twister (http://www.performance-pcs.com/catalog/index.php?main_page=product_info&cPath=36_69&products_id=25810) fans looked like in his case

http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod9g.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod9i.jpg

Enermax Apollish Twister 120mm Blue Fan
http://www.mnpctech.3dpixelnet.com/picture_library/n1nzxt.adamas.msi.fuzion9z9z9z9e.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/n1nzxt.adamas.msi.fuzion9z9z9z9d.jpg

MonsterMawd
05-29-2011, 11:31 AM
Here is the Power Supply for Joe's system. The PSU is SLI ready certified, and comes with both six and eight pin PCIe connectors. The connections at the PSU are specially designed to screw-lock into place so you don’t have to worry about them coming off. This is all I'm doing until Joe decides what he wants done next.

KINGWIN Mach 1 ABT-1000MA1S 1000W ATX / BTX
SLI Certified CrossFire Ready
80 PLUS BRONZE Certified Modular Active PFC Power Supply

http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod9_psu1.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod9_psu2.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod9_psu3.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod9_psu4.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod9_Optical9c.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod9_Optical9f.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod9_Optical9d.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod9_Optical9e.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/surferjor_coolermaster_690_casemod9_Optical9b.jpg

back to my other customers projects for now.....

Kipper
05-29-2011, 03:40 PM
Bill, the suspense is killing me. LOL

With the drive cages turned and the left side windowed how are you going to allow access to the optical drive?

Kipper