PDA

View Full Version : How To Guide: Installing new shoes for your PC!



MonsterMawd
05-23-2011, 04:59 PM
http://www.mnpctech.com/08_casemod_computer_feet_mnpctech.blackdiamond1wb3 .jpg

Installing Mnpctech Black Anodized Diamond Knurl feet to Antec 300 mid tower case

A Power drill with 11/64 drill bit is needed.

Available at this link
"Black Diamond" Black Anodized Machined Aluminum Computer Case Feet (http://www.mnpctech.com/Aluminum_Computer_Case_Feet.html)

The feet include fasteners that are 8/32 x 1-1/4" long screws with #10, 1" O.D. washers

http://www.mnpctech.3dpixelnet.com/picture_library/computerfeet_blackanodize_mnpctech.com5.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/computerfeet_blackanodize_mnpctech.com6.jpg

The Antec 300's rubber adhesive feet can be peeled off.
http://www.mnpctech.3dpixelnet.com/picture_library/computerfeet_blackanodize_mnpctech.com1.jpg

You may need a flathead screwdriver to help pry them off, but be careful not to scratch the paint!
http://www.mnpctech.3dpixelnet.com/picture_library/computerfeet_blackanodize_mnpctech.com2.jpg

Using 11/64 drill bit to enlarge Antec 300 factory made feet holes
http://www.mnpctech.3dpixelnet.com/picture_library/computerfeet_blackanodize_mnpctech.com3.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/computerfeet_blackanodize_mnpctech.com4.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/computerfeet_blackanodize_mnpctech.com7.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/computerfeet_blackanodize_mnpctech.com8.jpg

Installed on Cooler Master HAF 922

http://www.mnpctech.3dpixelnet.com/picture_library/cmbHAF932_pc_case_feet_mnpctech3.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/cmbHAF932_install_window_case_mod_mnpctech9g7.jpg