PDA

View Full Version : ASUS G75 RESTORE 3D Function after update bios 222



dmutro08
12-20-2012, 07:34 PM
Received a message from tech support about not running 3D mode, made as described - it works, but wait for fixes, here's a quote:
It is still not finally found the root cause of the failure, but managed to run 3D on a similar machine.
1. Go to the BIOS (F2 repeatedly when you start the laptop)
2. Then, disable FAST BOOT - DISABLED tab BOOT, Turn LAUNCH CSM - ENABLED
3. Then, in the SECURITY tab disable SECURE BOOT CONTROL - DISABLED
4. After changing, save F10 and press ENTER

My model ASUS G75 9Z225H. After this operation 3D is work and i wery happy: D
ASUS G75 is great machine!!!!!!!!!!!!!!!!!!!!!!!

boofsterb
12-21-2012, 05:33 AM
Received a message from tech support about not running 3D mode, made as described - it works, but wait for fixes, here's a quote:
It is still not finally found the root cause of the failure, but managed to run 3D on a similar machine.
1. Go to the BIOS (F2 repeatedly when you start the laptop)
2. Then, disable FAST BOOT - DISABLED tab BOOT, Turn LAUNCH CSM - ENABLED
3. Then, in the SECURITY tab disable SECURE BOOT CONTROL - DISABLED
4. After changing, save F10 and press ENTER

My model ASUS G75 9Z225H. After this operation 3D is work and i wery happy: D
ASUS G75 is great machine!!!!!!!!!!!!!!!!!!!!!!!

Thank You!
I have a G75VW-DH73 w/3D and after 221 update I lost my 3D. Thinking 222 update fixed 3D I realized it didn't till you came along with temporary solution. Unfortunately all the hours on the phone with tech support, not one was as helpful as you.

SUKARA@ASUS
12-21-2012, 07:39 AM
Thanks you remind sharing...

boofsterb
12-22-2012, 01:16 AM
Does anyone know if there will be an update to fix the bios update 3D problem?