PDA

View Full Version : New 3DMARK



Menthol
02-05-2013, 03:24 AM
I just got home from work and downloaded it and made my first ever run with my 24/7 settings, cpu @4600 offset voltage, power savings all on and gpu's on standard bios, factory settings, no tweaks on anything. Maybe make some runs this weekend

16772

Rockford
02-05-2013, 03:26 AM
Great..

that i must check out..

Thanks for the tips ment..

Rockford
02-05-2013, 03:27 AM
I know that this forum can turn into a 3D Mark Mayhem, in a blink of an eye..

srmojuze
02-05-2013, 03:47 AM
I just got home from work and downloaded it and made my first ever run with my 24/7 settings, cpu @4600 offset voltage, power savings all on and gpu's on standard bios, factory settings, no tweaks on anything. Maybe make some runs this weekend

16772

Sweet. Waiting for this to come out, 3DMark Vantage looks so cheesy now LOL.

Rockford
02-05-2013, 03:49 AM
Yes, going to check this out tomorrow..

seems like lotta fun..

vantage Cheesy?, what about Aquamark? ;o)

srmojuze
02-05-2013, 03:54 AM
Yes, going to check this out tomorrow..

seems like lotta fun..

vantage Cheesy?, what about Aquamark? ;o)

LOL... In other news, that's it, I will probably get no work done today. 5 minutes to go. G55 ROG with Kepler 660M. Hopefully I can run OC 1200mhz core and 2900+mhz mem like with Uniengine Heaven. We'll see.

Dead Space 3 comes out in Australia this Thursday, will pick it up Thursday night.

Ah, life is good.

Menthol
02-05-2013, 03:58 AM
Yes I enjoy the graphics benches, a easy stable overclock, cpu @5.0, gpu's at +200 core +500 mem.
If the nvidia titan or whatever they call it doesn't get released soon I am going to have to swap out these 680's for some 7970's, I'm bored with these cards

16774

Menthol
02-05-2013, 04:13 AM
Well it appears no sli profile for nvidia out the gate. will have to play more, here is the first 24/7 settings on a single card, looks better but still weak

16775

Need to learn what it takes to run this new bench

srmojuze
02-05-2013, 04:23 AM
Asus ROG G55 Nvidia 660M core 1,100mhz mem 2900mhz.

16776
__________________________________

Asus ROG G55 Nvidia 660M core 1,200mhz mem 3000mhz (as far as I can push it I reckon)

16778

DooRules
02-05-2013, 08:13 AM
313.95 or 313.96 has sli working just fine, up to two cards at this point.

HiVizMan
02-05-2013, 08:29 AM
I will play a little later this week too. I can even remember when Aquamark first came out. :p

Zka17
02-05-2013, 12:30 PM
Great! Actually this benchmark could be the perfect one for my new AMD system... :cool:

chevy350
02-05-2013, 02:40 PM
Here's what I've gotten so far

16786

Rockford
02-05-2013, 05:15 PM
Did a run...

with all demos as well, didnt find the option, 2 run only the benchmarks..


But the online results failed, and i didnt find a way to get the results offline..

so, score 0......

ram run fine at 2460 mhz..

at least i got to test that..

Zka17
02-05-2013, 05:21 PM
Here is my run too:

16789

I just had time for a run on stock settings... it's damn long... - next time I will focus only on Fire Strike, with no demo running...

Chino
02-05-2013, 06:47 PM
Guess I won't be trying this one for a long while lol.

Rockford
02-05-2013, 07:13 PM
Chino> Why?

Zka17
02-05-2013, 07:14 PM
Yes, why not Chino?

Rockford
02-05-2013, 07:18 PM
Why is that Chino?

Chino
02-05-2013, 07:20 PM
Some personal issues to work out...so sacrifices were made. LOL :p But you guys have fun though! Will come back to put more points up for the team soon!

Zka17
02-05-2013, 07:26 PM
Sorry, mate... hope, you can resolve your issues...

Rockford
02-05-2013, 08:06 PM
I did a LAN transfer, so it possible it got messed up in the process..

DLing a new copy now..

Take care Chino..

Rockford
02-05-2013, 08:24 PM
No, still same issue..

Might be related to the fact, that my OS drive got the letter G

Zka17
02-05-2013, 08:27 PM
Have you done any tweaking to the OS and/or driver?

Rockford
02-05-2013, 08:30 PM
Yes i have..

Slightly improved the OS performance..

Zka17
02-05-2013, 08:31 PM
May that be the problem?

Rockford
02-05-2013, 08:33 PM
No, i dont think so..

No rush...

But if everything was set to default, it might run.. but i dunno

Zka17
02-06-2013, 02:02 AM
You can try... :) But as you said, no rush...

Menthol
02-06-2013, 03:31 AM
I cannot get sli score where it should be for some reason, using the latest driver, reseated gpu's, replaced sli link, reinstalled drivers AB and 3DMARK increased my single card score a lot but as soon as I enable sli it's like I dropped an anchor out the side of the boat. I am sure it must be something simple which sometimes are the hardest to find because your looking for something difficult, I even tried each card separately with equal good performance, I would greatly appreciate any clues or suggestions.
Thanks in advance
After what you just experienced Zka I am not going to complain to much as my issue seams small in comparison and I will probably be embarrassed by how simple the solution is.

ganji
02-06-2013, 07:10 AM
I cannot get sli score where it should be for some reason, using the latest driver, reseated gpu's, replaced sli link, reinstalled drivers AB and 3DMARK increased my single card score a lot but as soon as I enable sli it's like I dropped an anchor out the side of the boat. I am sure it must be something simple which sometimes are the hardest to find because your looking for something difficult, I even tried each card separately with equal good performance, I would greatly appreciate any clues or suggestions.
Thanks in advance
After what you just experienced Zka I am not going to complain to much as my issue seams small in comparison and I will probably be embarrassed by how simple the solution is.

Are you using 310.70 or 310.90?
I've had some issue's where my second card isn't being used in games it used to, ie BF3. After googling it seems a lot of folks have had similar issue's with 670/680's and the 310.## drivers.

DooRules
02-06-2013, 08:10 AM
For sli to work properly for now you must use 313.95 or 313.96 drivers...

Managed to crack 13000 so far...

http://www.3dmark.com/fs/50944

ganji
02-06-2013, 08:14 AM
For sli to work properly for now you must use 313.95 or 313.96 drivers...

Thanks!
I was under the impression the beta drivers were proppa buggy and should steer clear?

Area 66
02-06-2013, 11:12 AM
Are you using 310.70 or 310.90?
I've had some issue's where my second card isn't being used in games it used to, ie BF3. After googling it seems a lot of folks have had similar issue's with 670/680's and the 310.## drivers.

Ya, I have single GPU performance in this bench with the 310.90 drivers with my 2 x 680 and also on another PC with 2 x 560 the bench report me a non qualified drivers

Menthol
02-06-2013, 01:00 PM
It appears I may have cured my sli issue by uninstalling nvidia drivers and using driver fusion to clean out all entries and a clean install, got a little issue with it freezing during the physics test now but at least I'm on track again.

Zka17
02-06-2013, 01:42 PM
Good to hear that you're back on track!

I haven't tested this 3DMark on GX680s yet... have to re-bild the RIVE system for that...

ganji
02-06-2013, 05:38 PM
It seems i have also solved my sli issue's :D I was just about to start uninstalling my drivers but checked the nvidia control panel first. I have no idea why but in manage 3d settings global The sli rendering mode was set to single gpu instead of nvidia recomended. It's not a setting i'd changed as i haven't tweaked any of the settings in the cntrl panel. My first nvidia gpu so a bit lost in it at the min.
Anyway i changed to nvidia recomended and bf3 now use's both cards again :D and so does Unigine. Apart from that i've had no other probs with 310.70

Rockford
02-06-2013, 10:23 PM
error= OS drive letter G

Zka17
02-06-2013, 10:37 PM
error= OS drive letter G

How you've got that? How many storage devices were connected when you installed the OS?

Rockford
02-06-2013, 10:59 PM
I am reinstalling the OS on the bench.. C drive this time

Will be playin a little with the 7750..

Zka17
02-07-2013, 12:18 AM
This guide helped me with Win7 installation... pay attention that only one drive should be connected at the beginning...

What's that thing in your hands?!

Rockford
02-07-2013, 12:20 AM
Installing drivers now takes a while. doin it all from remote machine.. And the router set the speed..

win is in place.. ^^

that, its a crappy alu heatsink, on the 7750

Zka17
02-07-2013, 12:49 AM
its a crappy alu heatsink, on the 7750

Ah, so! And changing it to a waterblock or just repasting it?

Rockford
02-07-2013, 02:19 AM
and the error, that i normally goes insane at..

Blinking white maker, after posting.. No win boot..

Like when you forgot a flash unit in the usb port, and dont know what the issue are.. and its booting from that one, or trying 2.

No flash drive this time..

/%(/%/(/%

Will not dig deeper into this tonight..

Zka17
02-07-2013, 02:23 AM
Sorry to hear that you still have troubles... :( - yes, I think, it's a good thing to step back and do something else... re-start it with fresh mind...

Rockford
02-07-2013, 02:55 AM
Typical I/O issue..

Fixed..

Now installing win, AGAIN..

But will enjoy a lasagna, and a film, while doin that..

Note. Someone else may run into this issue, and to spare Asus 1872 pcs RMA,s>

One of the SSD's got baked..

And are now removed...

Everything is running fine now..

Vertex 3..... i am not surprised..

Rockford
02-07-2013, 02:35 PM
sometimes its fun, sometimes not..

UEFI, EMS, PRIMARY, LOGICAL, DYNAMIC, MBR

kkn
02-07-2013, 04:20 PM
Vertex 3..... i am not surprised..
2 years and runing flawles :D

Rockford
02-07-2013, 04:23 PM
btw, my heatsink i showed.. Radeon 7750

Prior to the "treatment", the temp was 39-40 idle (from factory)

Now, after "treatment", 31-32c, same fan speed..

Why dont manufacturers bother, its so simple..

Ok, may not be needed, and running on 60c 24/7 prob wouldn't harm either..

But if you add things up in your pc, you get a lot of xtra noise for free, due to the fans are running faster, causing vibrations, and noise.

I know, same old WhitePaw, same old nagging..

But the truth..


I see this all the time, in gear i buy.. I think its poor..

Rockford
02-07-2013, 09:50 PM
Radeon 7750..

Zka17
02-07-2013, 10:00 PM
There you go! :cool:

I think, it's enough to run the Fire Strike... but start tweaking the 7750... :)

Rockford
02-07-2013, 10:07 PM
Just a test run..

No, i think radeon 7750 is best left alone.. ;o)

Rockford
02-07-2013, 10:11 PM
Moving in a couple of week, after that, time 2 browsing 4 gpu..

Menthol
02-08-2013, 03:50 AM
This benchmark has been giving me the fits, I cant get sli runs on one of my OS's but can on the other, can't complete a run on same clocks I used during the December Challenge but I managed to complete a couple decent runs and submitted them on the bot anyways, again can only compete against other nvidia cards, Salute to AMD for there kick ass cards

Single Card

16888

Dual Cards

16889


Will try again maybe this weekend

Menthol
02-08-2013, 03:59 AM
WhitePaw,
Again with the number 1 rankings, congrats and respect to you, I was so busy submitting I didn't notice your new cups

Rockford
02-08-2013, 04:02 AM
Thanks..

3 of them, in 2 i was alone.. So it wasnt so hard..

;o)

Rockford
02-08-2013, 04:03 AM
Any update on the chiller?

Its late over here, time for nap..

But i reply tomorrow..

Ps: get a 7970..

Ds: nice timings..

Metaltoby
02-08-2013, 08:21 AM
I'm experimenting with the the HD 7970 cards for a while and the testresults of the cards on 3DMark Vantage/11 on 5Ghz are good. Now we got a new 3DMark and the tests with Ice Storm en Cloudgate are OK,. Unfortunately the test on Firestorm (Combined Test) are failing due to the low FPS (7FPS). Despite my hardware there are systems with less cards with higher scores. I've tested all the three cards separately on MSI Kombustor and the other 3DMarks with fine results even when OCed. I don't know what the problem is but i hope someone can help me to get me in the saddle again! Or is it a CF driver issue....

System adjustments:
3960X 5,00Ghz (50x100, Vcore 1,49V,)
Corsair Dominator 16Gb 2400Mhz (1,68V)
3x Sapphire HD7970 (1250, 1,28V/1750, 1,67V)
AMD Catalyst 13.2/Beta 5
Rampage IV Extreme BIOS 3404
Windows 7 64 bits Ultimate

Zka17
02-08-2013, 06:27 PM
I've got my replacement RIVE and I'm celebrating with this result:

16900

It's just a single Matrix Platinum and a very dirty 5GHz OC for the CPU (still testing my waterchiller) - more details later in my thread...

Rockford
02-08-2013, 06:47 PM
very nice physic score?, is that mainly because the ram tweaks?

Zka17
02-08-2013, 06:52 PM
Not sure yet... that's the XMP value for the GSkill Pis... :cool:

Actually, it may happen that loosening the timings and increasing the frequencies may help more... - but this is just a theory yet...

Rockford
02-08-2013, 06:56 PM
i used 2400 mhz, cl 10.. 1T, and a higher cpu oc.. But scored less?

only 13k

Zka17
02-08-2013, 07:21 PM
Well, 2133MHz with CL7 is more efficient than 2400MHz with CL10..., also my kit is just a dual channel one (2x2GB)- but sincerely don't know how much this counts for the PhysX score yet...

As I said, this was a dirty experiment... I just wanted to see if my new RIVE works and how the 3930k behaves with the waterchiller...

Hopefully, this weekend will have enough time to try my Dominator Platinum kit too (2400MHz, CL9) - then will be able to say more about this matter...

Rockford
02-08-2013, 07:48 PM
i come to realize that my other ram settings, are way to loose..

Working on it now, i used the xmp, for the benchmark

Rockford
02-08-2013, 09:57 PM
so, tweaked and ready..

I did a vantage physics run at 5,0 ghz, and scored 5100

so thats ok.. with indoor cooling

for now

How much do you get get in physics, at 5,0 ghz in vantage?

Zka17
02-08-2013, 09:59 PM
So, a FireStrike run?

Rockford
02-08-2013, 10:01 PM
no, ok i am old..and got patience..

but ehh, its too long... 2 run all the stuff

No

Zka17
02-08-2013, 10:04 PM
Just select Fire Strike... the other stuff is for kids... :p and uncheck the demo... - suppose to finish it very fast (around 5 minutes)

Zka17
02-08-2013, 10:09 PM
How much do you get get in physics, at 5,0 ghz in vantage?

Based on this http://www.3dmark.com/3dmv/4540213 (on the old mobo) is 62 operations/s

Rockford
02-08-2013, 11:02 PM
Thanks for the link..

And its not possible 2 uncheck those things in the free version, at least i cant do do..

Rockford
02-08-2013, 11:23 PM
Ok, the verdict..

This time i used tweaked ram.. Lower freq, but tighter

HT enabled

and only 5.0 ghz, insted of the 5,05 ghz

its odd, almost a 5k difference.. With same setup, same cooling..

Well, i dunno..

But i guess the cpu throttled some more at 5,05, due 2 heat

And its indoors, so i can understand this..

Zka17
02-08-2013, 11:44 PM
Yeah, it does seems that more RAM efficiency helps the PhysX...

Menthol
02-09-2013, 01:52 AM
Back on the RIVE, glad to here that, what are you using the chiller on, cpu, gpu, or both.
Zka,
We are both on the Pysixs hall of fame, I'm right under you, haha

16915

Zka17
02-09-2013, 01:59 AM
Do not even mention the RIVE to me... I'm really upset on it now... (see my last post in my thread) :mad:

Rockford
02-09-2013, 03:01 AM
Congratz..

Menthol
02-09-2013, 03:13 AM
Thanks, I don't think it means much at this point, just thought I'd bring it up,

Zka17
02-09-2013, 11:17 AM
Sorry, guys, last night I've got really mad... - but today is an another day! :cool:

I see, Menthol, that you already passed me... good job, my friend! :)

Menthol
02-09-2013, 03:01 PM
Thanks,
Don't worry about it, we all know the feeling, I had several issues last night, my RIVE went into a series of restart and updating ROG firmware, and it quite making the beep sounds, fortunately a clear cmos stopped that.
I should have installed the chiller on the GPU's only as It doesn't chill the GPU's and CPU cold enough to allow any higher clocks, this bench needs high high video memory clocks and neither of my cards memory clock well

Zka17
02-09-2013, 03:10 PM
Yeah, that chiller had a hard time on my AMD system too... :) When all the components (CPU, VRMs, VGAs) are connected, then something additional may needed... the regular radiators running on ambient temps seems to make things worse... - at least on my AMD system...

How is the noise of the chiller for you? For me it's pretty acceptable... not louder than when I had all 14 fans at full blast on the rads...

Menthol
02-09-2013, 04:13 PM
Yes the noise is acceptable, I have no shaking or rattling noises during the unit start up, or any irregular noises coming from the unit at all, the panel shows temperature in Fahrenheit, idle it sets at 45 to 48, running benchmarks last night it was at 48 to 52 degrees on the unit. It doesn't cool it enough to reach 39 and shut off or any moisture to form, still cooler than ambient

Zka17
02-09-2013, 04:18 PM
It's strange... mine goes down all the way to 39-40F, but then I'm getting trouble with condensation... (we have very high ambient humidity here) I can go only about 10C (coolant temp) without condensation... - but for now that's enough for me... :)

BTW, we're friends again with my RIVE! :cool:

Granger
02-09-2013, 05:13 PM
Heres mine, not tweaked the GPU's may get a little more if I do ;)

http://img11.imageshack.us/img11/341/3dmark13b.jpg (http://imageshack.us/photo/my-images/11/3dmark13b.jpg/)

Menthol
02-09-2013, 06:51 PM
I gave this a run on Windows 8, I seem to have gotten some strange results, FM reports the wrong graphic driver version, correct shows in GPUZ,
A lower CPU clock, lower Physics score and higher Graphics score, not sure what all that means, but that's what happened. Almost up there with the 7970's

16948

Zka17
02-09-2013, 09:32 PM
Don't worry about the FM driver warning! They just released this benchmark, perhaps it not recognizes all the new drivers yet...

I'm just thinking... maybe all those things running in the background may slow down our CPUs... - has anyone tried to stop unneeded services/applications?

Rockford
02-09-2013, 10:34 PM
Nice one Granger..

Do you also have to run all the tests and stuff.. You cant uncheck things?

Granger
02-09-2013, 10:59 PM
I have the free version, so you only get one button to press and that is "Run All Tests" lol

I stopped everything except monitoring software ;)

Zka17
02-10-2013, 03:38 AM
OK, here they are! With 2x Matrix Platinums on RIVE:

16963

With that I'm on Hall Of Fame, 8th place (don't ask why I have the Japanese flag displayed there):

16964

Then I have a run for the HWBOT too... check my thread... :cool:

Rockford
02-10-2013, 03:46 AM
Very nice score..

And you are Japanese also..

Rockford
02-10-2013, 03:47 AM
I gave this a run on Windows 8, I seem to have gotten some strange results, FM reports the wrong graphic driver version, correct shows in GPUZ,
A lower CPU clock, lower Physics score and higher Graphics score, not sure what all that means, but that's what happened. Almost up there with the 7970's

16948

You guys are really bringing up the heat..

Damn nice score Ment..

Menthol
02-10-2013, 05:20 PM
Thanks very much, I am stretching the life of these 680's, can't catch the 7970's but staying up with the Nvidia cards.

16985

16986

16987

Can't catch you Zka, AMD rules the Graphics benches
Even with the chiller I can't get the temps low enough to clock these cards any higher, I will wait a few weeks to see if the Nvidia Titan is a myth or reality, if not maybe I will need to get some 7970's

Menthol
02-10-2013, 05:47 PM
Also at least for me I have finally found a use for the Windows 8, I get higher scores in this benchmark, besides that I don't care for the new OS

Zka17
02-10-2013, 06:01 PM
That is very nice, Menthol! Have you tried using the 125 CPU strap? It would increase the QPI link's speed... which may help the graphics cards... - I haven't tried yet, just thinking...

Menthol
02-10-2013, 06:25 PM
Yes during the December challenge I was running 130 to 131 blck, I can't clock my CPU much past 5200 no mater what settings I try, 2400 on memory is almost the limit for me also, CPU will clock higher with mem at less than 2400, so I look for a happy median between cpu, ram, and gpu, my skills are not as good as some though

Menthol
02-10-2013, 06:28 PM
Now is time to go to my daughters house, I have another Grandson with a birthday party today

Zka17
02-10-2013, 06:35 PM
I see... well we're all learning... :)

Happy Birthday to your Grandson!

Dartmaul
02-10-2013, 07:03 PM
Wow seems like I'm missing something?)
Got a new RIVE few days ago, gonna use it in right way)

Zka17
02-10-2013, 07:09 PM
I was wondering where are you... :) ROG on, my friend! With your watercooled HD7970s I'm expecting really good results from you...

Dartmaul
02-10-2013, 07:23 PM
16990
That's my 1st run in this bench. 24\7 settings.

We are running firestorm right?

Zka17
02-10-2013, 07:31 PM
That is very nice, Dartmaul! :cool:

Yes, FireStorm, maybe FireStorm Extreme... the rest isn't for our rigs...

Dartmaul
02-10-2013, 09:19 PM
http://hwbot.org/submission/2355311_dartmaul_3dmark___fire_strike_2x_radeon_hd _7970_16539_marks :rolleyes:

Seems that tessellation mod isn't allowed for this test. But I had no choice I have 4-cores 3820 CPU that is so crappy so 3Dmark refuses to recognize it!

Rockford
02-10-2013, 11:02 PM
16.5K....

You strike like the lightning..

Dartmaul
02-10-2013, 11:14 PM
You haven't invited me to this thread earlier so I've missed warm-up stage(

PS I'd like to have some lighting to strike with)

Rockford
02-10-2013, 11:39 PM
soon i will..

Rockford
02-10-2013, 11:56 PM
Ok Zka.. vantage.. but

The physics score seem to work now....

5,0 hz..

one thing, when having a rig, with minimal windows/programs/running services and so on..

It goes striking fast between the tests, no delay..

Menthol
02-11-2013, 12:25 AM
Yes good job Dartmaul, cpu not recognized?, WhitePaw, you sure know your way around AMD cards,

Dartmaul
02-11-2013, 06:42 AM
, cpu not recognized?
No idea why, but I've done few runs closing 3dmark between each run but it haven't managed to see it's 3820.
But CPU-Z has no problem with that so I guess no validation issues.

stefpats
02-11-2013, 02:51 PM
here is me http://www.3dmark.com/3dm/90966

Dartmaul
02-12-2013, 06:03 PM
http://hwbot.org/submission/2355983_dartmaul_3dmark___fire_strike_extreme_2x_r adeon_hd_7970_8421_marks
FireStrike Extreme run. Absolutely no tweaks, 24/7 settings, over 100 processes in tray.

EDIT
No I haven't found any abuse that actually breaks the test, just a little tweak that cad give a little improvement)

Zka17
02-12-2013, 06:06 PM
That's cool, Dart! :cool:

srmojuze
02-15-2013, 02:23 PM
here is me http://www.3dmark.com/3dm/90966

Beautiful Beautiful Beautiful... GTX 690. I knew it would shine. Just need some more driver optimisations.


http://hwbot.org/submission/2355983_dartmaul_3dmark___fire_strike_extreme_2x_r adeon_hd_7970_8421_marks
FireStrike Extreme run. Absolutely no tweaks, 24/7 settings, over 100 processes in tray.

EDIT
No I haven't found any abuse that actually breaks the test, just a little tweak that cad give a little improvement)

Congratulations!

Menthol
02-16-2013, 07:56 AM
How in the hell did that happen

17227

Zka17
02-16-2013, 11:59 AM
Which, that you're first or that you're running under other flag?

The first place is because you're good! :cool: The flag is because FM is messing that up...

Menthol
02-16-2013, 03:32 PM
That I'm 1st and with Nvidia of course, the flag thing seems to change with every submission

Zka17
02-16-2013, 03:40 PM
the flag thing seems to change with every submission

Yeah, I've been already polonese, japanese and german... then I've lost counting it...

maximiza
02-20-2013, 12:14 AM
I got better scores with Win 8 pro 64 then Vista 64 ultimate , I did manage to break the 5000 barrier which was ok for my low binned GPU. 5240

http://www.3dmark.com/fs/171302

Menthol
02-20-2013, 02:48 AM
3DMARK is a DX11 benchmark, I wouldn't expect a score in Vista, but I also got a higher score in Win 8 over Win 7. Drivers and tweaking have not got far on this new bench yet. Scores will improve soon.

Dartmaul
02-20-2013, 08:21 AM
There are at least 2 free golden cups on bot in new 3DMARK tab.
Are you guys going to take them or what?
I'd like to do it by my own but 2 CPU cores are missing(

PS I'm gonna update my submissions on weekend.

Rockford
02-20-2013, 09:02 AM
Dart, have you fry 2 cores?

Dartmaul
02-20-2013, 09:45 AM
No I just have 4-core CPU instead of 6-core atm(

Metaltoby
02-20-2013, 10:09 AM
Finally, I've got a good score in Firestrike.

2XHD7970 (1250 1.281V/17701,765V, air)

The drivers are still crappy for more than 2 CF cards. I Love the HD7970 (Sapphire)

Zka17
02-20-2013, 11:01 AM
That's a very good score, Metaltoby! :cool:

Why you haven't submitted it to the FM? You would be on the first place in Hall of Fame... :)

Dartmaul
02-20-2013, 11:04 AM
Finally, that's what I was talking about.

Metaltoby, I'm sure you can jump over 17k score.
Take a look at VGA's mem freq, I'm sure you can add some more MHz.
Also try to use 125 strap and lower 2nd RAM timings. I use tRFC 112 clocks for 4x4 kit on this freq. I'm sure you can optimize much at this point.
Also CPU overclock will give you a serious impact (not only at physx test but overall) CF graphics scales well from CPU freq.

Menthol
02-20-2013, 01:03 PM
Hurry and get it while you can, Dart if you had 6 cores you would own them all

Metaltoby
02-20-2013, 03:13 PM
It's unbelievable that i managed this record due to the hardware (7970 Sapphire, stock cooling) and hours and hours spending time in BIOS. But unfortunately i don't have a legit version of 3DMARK yet. So this record is not legit! Next week i will buy a legit version and i will try to break my record.

Metaltoby
02-21-2013, 09:31 AM
The next in line...:)
17437

Zka17
02-21-2013, 11:21 AM
I think, you found the way how to tweak for the FireStrike... :D On what OS are doing these runnings?

Metaltoby
02-21-2013, 02:35 PM
OS: Windows 7 64 bits Ultimate, succes!:rolleyes:

Zka17
02-21-2013, 03:09 PM
Soon, will try again... when my waterblocks for Matrix Platinums arrives... - or, maybe should give a shot with the GTX680s?

Metaltoby
02-21-2013, 04:12 PM
Maybe you can surpass Menthol 's fifth place in the hall of fame or maybe... But if so you really must give your hardware a major kick in the ass!:o

hint: A switch more or less will do the trick on an ARIVE!

Zka17
02-21-2013, 05:41 PM
hint: A switch more or less will do the trick on an ARIVE!

He-he, thanks! Will try all the switches too... :)

Menthol
02-21-2013, 07:21 PM
Is that the kick menthol's ass switch, everyone seems to have that switch

Zka17
02-21-2013, 07:23 PM
No worries, Menthol, I haven't found it yet either! :)

Dartmaul
02-21-2013, 08:01 PM
Is that the kick menthol's ass switch, everyone seems to have that switch

http://www.3dmark.com/fs/189007
Let me remind about my brave 3820)

Since SystemInfo has completely failed to detect my hardware I'll post it manually:

CPU: H2O cooled i7 3820 @ 5309 MHz (129.5x41)
VGA: H2O cooled 2 x HD7970 (1380/1960 and 1350/1850)
RAM: Air cooled RipjawsZ @ 2416.5 MHz 10-12-11-27 T1
MB: H2O cooled RIVE

Ambient temp -8C

Zka17
02-21-2013, 08:06 PM
WOW, Dart! With a single HD7970... nice! :cool:

Have you found that RIVE switch? :)

Dartmaul
02-21-2013, 08:15 PM
It's not single card)
I've added the hardware list to my previous post.

17466

Zka17
02-21-2013, 08:16 PM
Ah, OK... still a damn good result!

maximiza
02-21-2013, 11:07 PM
nice dartmaul

Menthol
02-22-2013, 02:05 AM
Dart harnessed the power from the Meteorite, maybe his computer got super powers from the radiation

Dartmaul
02-22-2013, 05:39 AM
http://cs6051.userapi.com/u16000434/docs/cf95b4ffa68b/file.gif
BTW
http://hwbot.org/submission/2359081_
A single card submission.

Metaltoby
02-22-2013, 08:02 AM
Wow, what a machine! You did a great job!:D You really don't need no switch...

Rockford
02-22-2013, 08:32 AM
Toby?

Switch??

Where on the board?

And what does it do?

srmojuze
02-22-2013, 11:12 AM
Dart harnessed the power from the Meteorite, maybe his computer got super powers from the radiation

In Soviet Russia, CPU overclock YOU...!

Zka17
02-22-2013, 11:43 AM
In Soviet Russia, CPU overclock YOU...!

Too bad that there is no more "Soviet"... - now you have to OC the CPU in Russia too... :)

Metaltoby
02-22-2013, 12:09 PM
I did some Firestrike benches with two cards in Catalyst activated but the Video-card switch (under the resetbutton) were still on trifire. The scores were much lower in comparison with only two switches (2CF) activated. It's a bit strange isn't it?

Zka17
02-22-2013, 01:17 PM
Ah, so! So, you still had three cards, just tricked the software... three cards but only two of them in CF... :)

Dartmaul
02-22-2013, 02:26 PM
http://www.thedailyshow.com/watch/tue-february-19-2013/how-i-meteored-your-motherland

Do not ever joke with Mother Soviet Russia! You cannot even imagine what consequences could happen!

BTW
Toby, you're doing well my friend, but I really hope that my tips that I've posted few pages behind could help you to get some more points)

Also which VGAs (I mean the certain model since Sapphire have around 6 different 7970 cards) and cooling do you have? And did you have searched for a max freq for each card?

Metaltoby
02-22-2013, 06:40 PM
I did the bench not with three cards but with two! Next weekend i will follow your advice in order to get a higher score!

Thnx... The max freq for the cards is 1255/1810. That's a little higher but i think there is more room for sliding the memory a bit further. On which voltage's do you run your cards at max (clocks and voltages)?

Rockford
02-22-2013, 06:44 PM
Maul for president..

you sure know how to work that bench of yours..

respect..

Dartmaul
02-22-2013, 07:31 PM
The max freq for the cards is 1255/1810. That's a little higher but i think there is more room for sliding the memory a bit further. On which voltage's do you run your cards at max (clocks and voltages)?

Toby, I was asking about max freq of each card. You actually have to test every of your VGA's separately to find the strongest and use it as a main. That will allow other cards to run a bit higher without crashing the system.

Since I have preference cards, I use highest available voltage - 1.3 for GPU and 1.7 for Mem.

BTW I'm sure you noticed ambient temp on my submission)

Metaltoby
02-23-2013, 10:32 AM
Yes i did! It is freezing outside (-7C) and with my window open the temps of the GPU's (full load) are not above 69C. The GPU voltages on 1260/1815) are (1,283/1,693). Not bad at all... Inside the desktop it's like a hurricane on 8C. A good jacket is a must behind the desktop when benching. Yes i'm quit an idiot to do so but i like it!:cool: Next week i will try to find the max freq of each card separately and find a stable freq for the CPU with 125 Strap!!

I just followed the advice of DM and the results were good!
17544

Dartmaul
02-23-2013, 07:22 PM
I guess that max stable freq for CPU doesn't depends on strap. So if you can run 5100 with 1.55v on 100MHz strap you probably can do so with 125MHz. IMO the best way would be 127.5MHZ BCLK and x40 mult. It would allow you to stay pretty close to 2400MHz at Mem.

Sometimes it's better to go outside instead of letting "outside" inside your place :D
I use my balcony as a benchmarking grounds.
My VGA's are pretty much secretive to a temperature. 10 degrees difference of ambient temperature gives me 400 more points)
Also use remaining voltage range. (I mean set max voltages for GPU and VGA mem and look how far can you get)

Dartmaul
02-23-2013, 07:35 PM
I guess that max stable freq for CPU doesn't depends on strap. So if you can run 5100 with 1.55v on 100MHz strap you probably can do so with 125MHz. IMO the best way would be 127.5MHZ BCLK and x40 mult. It would allow you to stay pretty close to 2400MHz at Mem.

Sometimes it's better to go outside instead of letting "outside" inside your place :D
I use my balcony as a benchmarking grounds.
My VGA's are pretty much secretive to a temperature. 10 degrees difference of ambient temperature gives me 400 more points)
Also use remaining voltage range. (I mean set max voltages for GPU and VGA mem and look how far can you get)

Metaltoby
02-24-2013, 03:07 AM
Wow, This was a good run (http://hwbot.org/submission/2360112_)... Ambient: -1C
17571

Dartmaul
02-24-2013, 09:21 AM
Finally, 17k broken!

Probably I can't push my score any further. Toby, take my congratulations!

But since you're 1.5k points behind me at graphic score, I can give you some more annoying useless advices.
(Need to make myself fell useful after being beat)

Your signature says that you can handle 4.8GHz with 1.4vcore. That's pretty good. I guess you can have at least 5.2 or maybe even more without rising vcore. Benching is about pushing everything to the limit, and CPU gives a good overall buff to a multi GPU rigs. Low ambient will give your chip some thermal protection an maybe even a little OC potential buff.

Also since you have 3 cards it probably means that they're installed pretty close together. Since you use air cooling on VGAs you may have to remove 3th card (that is probably between 1st and 2nd) to provide required air flow. Also don't forget about some external fans. The bigger the better.
If everything would be done right you should keep your GPUs under 40 degrees full loaded. That will allow you to reach 1300 MHz.
Since GPU and mem are actually on the same radiator, maybe some mem freq improvements will be gained.

Metaltoby
02-24-2013, 12:16 PM
Thnx for the congratulations! Because of you beating me first, you inspired me to do so...:D

I will try in a few days to set up the cards like you recommended and hopefully with a nice result!

Zka17
02-24-2013, 12:53 PM
Hey guys, please, pay attention: http://rog.asus.com/forum/showthread.php?29603-Vantage-Full-out-gt-gt-gt-gt-gt-gt-GO-Supremes!!&p=230483#post230483

Metaltoby
02-24-2013, 01:20 PM
Hey guys, please, pay attention: http://rog.asus.com/forum/showthread.php?29603-Vantage-Full-out-gt-gt-gt-gt-gt-gt-GO-Supremes!!&p=230483#post230483

Do i have to upload a wallpaper with my submission or do i have to post the HWbot results on your suggested topic?

Zka17
02-24-2013, 01:36 PM
Perhaps you need to re-run the Vantage when you put the official competition wallpaper on... and submit it on the competition page...

Metaltoby
02-24-2013, 02:44 PM
When i got the time i will re-run a Vantage and submit it on that page. But for now i need some rest after a night Try Out of Metal InQuizitor.

Zka17
02-24-2013, 03:47 PM
No hurry, mate... we still have 65 days... :)

rubycon
03-06-2013, 01:30 PM
Hi
Here is mine:

17978

Luumi
03-26-2013, 11:46 PM
I got this score, which I'm trying to get validated so can put it on hwbot. Sadly I had very bad temperature scaling issues, of which I would like some info if there's a way to get more, since the system hangs if I try to boot with higher overclocks. Anyways, here is my first proper 2 card 3dmark score :P :

18762

Zka17
03-27-2013, 12:26 AM
Those are pretty high settings... why you couldn't validate it online?

What is your cooling?

Luumi
03-27-2013, 01:08 AM
I was using Dry Ice and I didn't have internet connection where I benched. 3Dmark does seem to automatically save all submissions but for some reason it doesn't allow me to load them. The score is so high on hwbot that it requires a compare link. I reached over 5.5 with only 2 cores, but I'm sure I could get more. Was reaching 5.550, but I started to run out of dice and I really hated all the problems I had with temperature. The temperature I always kept the pot was from -13 to -19. If I went over -20 at 5.4+ the system hanged and had to use power button to shut it down. If I tried to boot at 5.4 with around -14 temperature the system hanged always after the windows logo stopped.

Menthol
03-27-2013, 02:48 AM
That's to bad you can't load a saved run, I have no problem loading them. That is super score there.

Zka17
03-27-2013, 11:52 AM
Yeah, I wasn't lucky to load saved submissions either...

Sinebrychof, how are you cooling the VRM?

Just FYI, you need the verification link only for the global top 20... - oh, which actually you're in now...

Luumi
03-27-2013, 02:27 PM
A strong fan is enough to cool the VRM area of the motherboard.


Still it's sad that when you start properly overclocking with a million features board, but then your cpu has problems with cold...

Zka17
03-27-2013, 08:58 PM
A strong fan is enough to cool the VRM area of the motherboard.

Well, specially on the RIVE, I found that high OC's are getting more stable if you can cool very well the VRMs... for me the fan method wasn't enough, got better results with water-cooling...

Luumi
03-27-2013, 09:29 PM
I had problems with temperature scaling. I used the system in cold ambient aswell and it didn't help at all so it can't be about that.

Zka17
03-27-2013, 09:36 PM
I see... then, maybe you didn't won the chip lottery this time... - I just thought to mention the water-cooling for the VRM as I could not go over 1.6V on the Vcore with air-cooling no matter how strong fans I had over the VRMs, and the heatsink on the VRMs was really burning hot... (now I can go, but my chip started behaving strangely - but that's an other story)

Luumi
03-28-2013, 01:59 AM
I don't get it why it can't load any of the autosaved results. It always says Loading result failed, and something about this:
system.nullreferenceexception object reference not set to an instance of an object.

Zka17
03-28-2013, 02:05 AM
Similar to what I'm getting... was looking on the Futuremark forums, but could not find anything yet... :(

Menthol
03-28-2013, 02:11 AM
I kind of wish to have to cold problem, but then it would be to cold for anything except benching, I have lived in Southern Cal most of my life, it's easy to get used to nice weather. Sorry Sine for your troubles, Most advice I could give is Google.
On another note my second Titan and back plates arrived, just installed and flashed bios on both, will install blocks hopefully Friday and see how well the bench.
For you ASIC quality monitors, one is 79%, one is 77.4%.
My 680's were a couple points lower and my 7970's were even lower. 680's clocked like crazy, 7970's good but not crazy good.

MrPeter1985
04-01-2013, 04:59 PM
Anyone else get black screen after the first test? Mine wasn't the white screen which is caused by Fraps. I don't have it running. It went black and nothing worked. ctrl alt del, alt tab, nothing, only thing that worked was the reset button.

Problem now is, whatever happened did something to my PC, it took much longer to load. It use to load in 10 secs where the 4 balls meet to form the windows logo, once the four balls reach it loads, now they connected and the logo pulsated many times. Took 20 secs to load to screen. Weird. I kinda got my boot speed back once I fully removed all the 3DMark files.

The only errors I'm seeing is the white screen. Weird. Possible a hardware issue with my OC's ??

-Pete

Zka17
04-01-2013, 07:46 PM
Yeah, it's perhaps because of your OC... try to re-adjust and ruin again... (usually not enough voltages, so either you increase those or lower the frequency)

Recovering after a crash does make the boot longer... if you restart couple of times, does it comes back to normal?

Menthol
04-01-2013, 10:53 PM
That has been my normal behavior trying to find highest overclock on my video cards, black screen, sometimes it will recover with a driver error, but usually have to restart, and a little longer to boot, Windows 8 only takes a few of those and wants to do a recover, I don't like 8 but I get my best scores in the new 3DMARK in 8.

Menthol
04-02-2013, 02:24 AM
Finally FM hall of fame

19115

Not that it means anything

19116

Zka17
04-02-2013, 10:58 AM
WOW, Menthol, that is awesome! :cool:

Menthol
04-02-2013, 12:21 PM
Thanks, it never lasts long

Dartmaul
04-07-2013, 11:37 AM
WoW Titans...
Menthol how much did you spent on VGAs since 2013?) 7970 lightings, then these)

BTW Seems that there's still no tessellation adjustment settings for nvidia cards?
(Once again I see ways to improve your score:p)

Arne Saknussemm
04-07-2013, 12:42 PM
Love it Menthol!!:D

Menthol
04-07-2013, 04:09 PM
New 3DMARK and Windows 7 sli not working, scoring lower than 1 card.
I have 3 SSD's with OS's installed, 1 with Windows 8 64bit., 1 with Windows 7 Ultimate 64bit, I use 24/7 with all programs and gaming, 1 with Windows 7 PRO 64bit., I use for most benching. Since the new 3DMARK came out my 24/7 Windows 7 scored very low in the new 3DMARK. Benching drive worked fine. Today I ran Win update on my benching drive and 3DMARK scores went to crap, so I started uninstalling updates to find which one was the culprit. KB 2570838 and IE 10 is the updates that killed sli in the new bench. To verify I uninstalled these updates on my 24/7 drive and sure enough that corrected the issue there also.

You guys may know this already, but I thought I would share in case you don't.

Have a good Sunday everyone

PS new 3DMARK still gets highest score in windows 8 for me, even with all the services running in the background as I haven't figured out what I can turn, windows 8 behaves badly after a couple bsod's or hard locks, wants to recover with a refresh, quite annoying.

Zka17
04-07-2013, 05:37 PM
Thank you Menthol! That's definitely some good info... - I was wondering why my 3x Matrix Plat setup is going so bad...

Remind me to rep you after I spread some reps around! :)

Dartmaul
04-07-2013, 10:01 PM
I guess Win8 will give some performance increase to any DX11 application)

Menthol
04-09-2013, 12:45 AM
Maybe in the new 3DMARK as it is DX 11.1

Luumi
04-10-2013, 08:50 PM
Guys wish me the best of luck that this will improve my scores :p . I just need a gpu pot now.

19454

Zka17
04-10-2013, 09:36 PM
Best of luck, Sinebrychof! :cool:

Arne Saknussemm
06-08-2013, 02:37 PM
Extreme counts for points now.....

21194

Luumi
06-12-2013, 09:11 AM
http://hwbot.org/submission/2389117_luumi_3dmark___fire_strike_2x_radeon_hd_79 70_17459_marks/
Not far from your normal fire strike run Arne :D. I did that run almost 3 months ago, which I could finally submit now.

Arne Saknussemm
06-12-2013, 09:58 AM
First with 7970s! nice one! :D

HiVizMan
06-12-2013, 10:10 AM
You boys are cooking up a storm in the bench kitchen hmm, what is next on the menu I wonder.

Luumi
06-13-2013, 02:14 AM
Some more serious single card action when my pot arrives :P. Hopefully it does soon!

HiVizMan
06-13-2013, 08:06 AM
Looking forward to it.

Luumi
06-20-2013, 12:28 AM
Where is myyyyyy pot? Damn slow customs boys thinking it's probably a flower base or a pen holder. So annoying to wait ages for it when you want to bench :P.

HiVizMan
06-20-2013, 07:46 AM
LOL you crack me up. Just pile some dry ice on the CPU in a big heap and bench.

Arne Saknussemm
06-20-2013, 05:38 PM
If you try to send pot through customs you can have problems....the least of which is they smoke it.....;)

Luumi
06-20-2013, 08:41 PM
Well I do hope I get it next week, I really can't wait for it :P. Happy midsummer to all of you.

HiVizMan
06-20-2013, 08:50 PM
I got my new shiny GPU pot and memory pot two days ago. It came all the way from Taiwan - oh so so very shiny.

Luumi
06-20-2013, 11:30 PM
From Kingpin? How long did it take to arrive from Taiwan since we both live in the EU. So Mr. Highvisionman is ready for serious Haswell benchmarking.

HiVizMan
06-21-2013, 10:18 AM
It was brought back from Computex for me, and has been here in the UK for some while. Did not come with couriers.

Skat137321
07-26-2013, 11:46 AM
I haven't seen any 770m results in here so I'm gonna post mine. Currently is the highest Fire Strike score with a single 770M.
When I will get some spare time, I'll try to go even higher. Do you guys think that running my ram in dual channel will help getting a higher score?


http://www.3dmark.com/fs/692033
http://www.techpowerup.com/gpuz/dkfs5/


2400424005

IndianScout
07-26-2013, 03:05 PM
IceStorm 167738

http://www.3dmark.com/is/568858

Cloud Gate 17026

http://www.3dmark.com/cg/508596

Fire Strike 4193

http://www.3dmark.com/fs/541078

stock video clocks, I'll run some new tests today..

Menthol
08-10-2013, 06:43 PM
New best for me, still lots of tweaking to do, 1.35 volts on core Arne with factory heat sink

24782

Compare the GPU clock to the boost clock

Rockford
08-10-2013, 07:31 PM
Indian> try to OC the cards a bit, only by increasing the GPU ram speed some, the score will increase..

ment> When it comes to firestrike and numbers i am slightly lost, i must confess.

Nevertheless i know you are a very good bencher, and by judging from those clocks, i would be surprised if that score wasnt really good..

a powerful fan (or 2) aimed directly at the stock gpu heat sink (close range), is more than enough, for cooling the vrm and ram.. better than a full-cover H2O block, i am sure..

Arne Saknussemm
08-11-2013, 09:05 AM
Nice menthol!....yeah noticed... no more boost... disabled by K boost or something similar or not happening at those high frequencies?

Menthol
08-12-2013, 11:51 PM
It's deceptive, it is a modified bios, not by me, it helps eliminate throttling and shows the same number for both clocks. It does downclock but holds the high number after a bench run. I did get a higher score than with the stock bios but the card boosts higher on the stock bios

Arne Saknussemm
08-13-2013, 12:47 PM
Is that on water? or you still got air cooler on there? People are interested to know what RAM chips these cards are coming with these days...if you take the cooler off have a look at the RAM and let us know....:)

http://rog.asus.com/forum/showthread.php?35961-What-memory-do-the-current-GTX780-DirectCU-II-OC-cards-use&country=&status=

Menthol
08-13-2013, 05:09 PM
I ordered some full cover blocks from EVGA, so I believe those are Swiftech, was considering universal but went with the full block instead. No others have been released as of this time.
My 2 cards have the Elpedia memory, which doesn't appear to overclock well at all. from what I can tell only the first batch had the Samsung that overclocked well. It is a bit, no a lot disapointing that they ship there premium product without the best components, As soon as I get the blocks I will have to dig through boxes that I have not unpacked yet to find fittings and such to add the Vid cards in the loop, and maybe the chiller if I can figure out where to put it so the heat it produces doesn't add to the ambient temps, then I'll run the core voltage up to 1.5 volts and see how high they will clock, I haven't done that for awhile. Hoping I can add some new hwbot scores

Zka17
08-13-2013, 05:42 PM
Hoping I can add some new hwbot scores

I think, you will! The time for the 780s is just about to come on HWBOT...

Menthol
08-14-2013, 03:58 AM
Zka or WhitPaw, would one of you please check my 2 submissions for errors, TOP 20 world record, I must have done something wrong

24972

Zka17
08-15-2013, 11:37 AM
I don't think that it would be anything bad with that score! Congrats, Menthol! :cool:

Menthol
08-15-2013, 12:14 PM
Thanks Zka, it looks good even if it doesn't mean anything, I have some water blocks for them now, I hope to put them on this weekend and get the chiller out, the evbot is supposed to be able to bring the core voltage up to 1.5 volts, I am not sure if TDP, throttling or some other Nvidia or card restrictions will limit the clocks on these cards but going to find out

Arne Saknussemm
08-15-2013, 02:49 PM
Nice one Menthol :D pretty good on air!!

Menthol
08-15-2013, 04:34 PM
Arne,
Thanks, I am setting a goal to break 20000, How have you been, done with vacation I assume, soon we'll be either testing IB-E or cusing Intel, or both probably, and AMD will have new GPU's soon also,

Rockford
08-15-2013, 06:10 PM
What is the model of the new AMD?, numbers that is.. 89, 99?

Arne Saknussemm
08-16-2013, 07:38 AM
Arne,
Thanks, I am setting a goal to break 20000, How have you been, done with vacation I assume, soon we'll be either testing IB-E or cusing Intel, or both probably, and AMD will have new GPU's soon also,

Good number! hope you can do it!

I'm still on vacation until some time in September....until the new CPUs are out....:D

Rockford
08-16-2013, 08:00 AM
Ill check that link later today A...

You know which one i mean

Arne Saknussemm
08-16-2013, 09:14 AM
Yep....I have to watch it carefully too...see if there is something weird about set up or if it's legit...

Menthol
08-17-2013, 07:00 PM
Almost there

25089

Rockford
08-17-2013, 08:48 PM
Very nice M..

Dartmaul
08-17-2013, 09:43 PM
Wow that's massive. Maybe sacrificing few GPU MHz for some vMem MHz would give you more?

As I know, the more is OC gap between GPU and vMem the more performance gives OCing slowest part.

IndianScout
08-18-2013, 01:13 AM
Indian> try to OC the cards a bit, only by increasing the GPU ram speed some, the score will increase..

those are just my every day clocks, the gpu is just running it's stock clocks, some of you may know me from Futuremark, I worked there for a long time..

I just bench now to make sure my system is running what I think it should..

Menthol
08-18-2013, 04:59 PM
25113

Made it to the 20,000 point mark

Zka17
08-19-2013, 12:39 AM
Congrats, Menthol, that is awesome! :cool:

Menthol
08-19-2013, 01:16 AM
Thanks Z, it's only Futuremark and that HOF changes fast, I set a goal to break those points, actually what I learned in Realbench has allowed me to increase the system performance in all benchmarks

Dartmaul
08-19-2013, 01:30 AM
Well done, my friend!
Can't wait to join you guys.

PS All 3 submissions over 20k are made on 780's, Titan bites the dust.

Arne Saknussemm
08-19-2013, 06:24 AM
20000 leagues under the sea? no 20000 sees you top of the league! Very cool Menthol!

HiVizMan
08-19-2013, 03:41 PM
Oh come on Menthol put some effort into it dude. : D :D


Nice going buddy that is what I call hitting a home run right out of the part.

ganji
08-19-2013, 05:29 PM
Gratz Menthol :D good job!

Menthol
08-19-2013, 08:33 PM
Oh come on Menthol put some effort into it dude. : D :D
I know right, getting lazy in my old age you know how that is

Thanks ganji