PDA

View Full Version : Monitor stuck at 60hz, and no 3d



jo326
08-17-2011, 01:33 AM
I have the G73JW, is there any way to find out if I have the monitor that supports 3d applications ? THe drivers were installed, but when I ran it it gave me the This display does not support 3d blah blah message, and I never tested it out before I got it repaired - had to get a new LCD put on it via warranty because the old one broke. Im just curious, anyway to get it off of 60hz? its my only option, and i have all the drivers updated

Brian@ASUS
08-17-2011, 04:25 AM
is your G73sw a 3de model? if not it wont have the 120hz panel you'll have a 60hz panel. if your unit didnt come with 3D glasses, it would most definitely not be a 3D model. you can however hook it up to a 3D dispaly or TV

Naits
08-21-2011, 01:33 AM
Usually when you get the "display does not support 3d blah blah message" it indicated that you screen actually does not support 3d.. in my experience, anyways.

Gliptor
08-24-2011, 02:26 PM
Have you opened your graphic properties to try and adjust your 60hz setting andvresolution of the screen.

3d tends to have an NVidea folder in the start menu with an option called "Enable 3D Vision". I would run that if available and reboot.

good luck!

Rball904
08-24-2011, 09:06 PM
I have the Enable 3d vision option but whenever i click on it it does nothing?