PDA

View Full Version : BnB [LDCooling PC-V7] por JaPeMo



JAPEMO75
08-31-2013, 11:42 PM
http://imageshack.us/a/img837/3883/logobnbg.jpg

Hi comunity of ROG!!!

My first experience with NZXT Switch 810 worklog, BnB, finish in problems and accident I had at the end of the mod, I decided to open a new thread with the new project. I had a low moral and I was pissed that they took away my desire to do something great and personalized. There have been many hours and nights reversed. I'll be back with more desire to finish what I started .
This mod will be something more simple and not as farfetched as above, but I be sure, that will be better. This time, I 'm going to adhere to the ideas and script that I have already written a paper. No improvise , then you know .
I hope you like the project. A greeting!

HARDWARE

Case: LD PC-V7 Black 280/420 (http://www.ldcooling.com/shop/ld-pc-v7/196-ld-pc-v7-black-280-420.htmlm)
Motherboard: Asus Maximus V Formula (http://rog.asus.com/motherboard/formula/maximus-v-formula/)
Processor: Intel 3570K (http://ark.intel.com/es-es/products/65520/intel-core-i5-3570k-processor-6m-cache-up-to-3_80-ghz)
VGA: EVGA GTX670 FTW SLI (http://eu.evga.com/products/moreInfo.asp?pn=02G-P4-2678-KR&family=GeForce%20600%20Series%20Family&uc=EUR)
SSD: OCZ Vertex 4 SATA III 2.5" SSD 128GB (http://www.ocztechnology.com/ocz-vertex-4-sata-iii-2-5-ssd.html#overview)
HDDs: WD Caviar Green 1T SATA WD10EZRX (http://www.wdc.com/sp/products/products.aspx?id=780) + WD Velociraptor 150GB (Disco de seguridad) + WD Caviar Black 640 GB (Para programas)
RAM: GSkill RipjawsX DDR3 1600 PC3-12800 16GB(4GBx4) CL9 (http://www.gskill.com/products.php?index=416)
Sound Card: Asus Xonar Essence STX' ('http://www.asus.com/es/Sound_Cards_and_DigitaltoAnalog_Converters/Xonar_Essence_STX) http://imageshack.us/a/img546/1413/1xc.gif http://imageshack.us/a/img35/2883/rqj.gif
Power Supply: Corsair HX1050W V2 80Plus Gold (http://www.corsair.com/es/power-supply-units/hx-series-power-supply-units/hx-series-hx1050-power-supply-1050-watt-80-plus-gold-certified-modular-psu.html?___store=es&___from_store=en)
Keyboard: Gigabyte Aivia Osmium (http://www.gigabyte.com.es/products/product-page.aspx?pid=4179#ov)
Monitor: BenQ RL2450HT (http://benq.es/product/monitor/rl2450ht)
Mouse: Razer Diamonback 3D
OS: Windows 8 Pro

AIR & LIQUID COOLING

CPU Block: EK Supremacy Acetal (http://www.ekwb.com/shop/blocks/cpu-blocks/ek-supremacy-acetal.html)
GPU Block: 2 EK-FC680 GTX+ - Acetal (http://www.ekwb.com/shop/blocks/vga-blocks/fc-geforce/geforce-gtx-6x0-series/ek-fc680-gtx-acetal-plus.html)
Reservoir: EK Multioption RES X2-250 Advanced
Radiators: Koolance Radiator 3x140mm 30-FPI Copper (http://koolance.com/radiator-3-fan-140mm-30-fpi-copper) + Koolance Radiator 2x140mm 30-FPI Copper (http://koolance.com/radiator-2-fan-140mm-30-fpi-copper) + Koolance Radia tor 1x140mm 30-FPI Copper (http://koolance.com/radiator-1-fan-140mm-30-fpi-copper)
Fittings:
20 EK-PSC Compression fitting 19/13mm (3/4" x 1/2") Black
9 EK PSC Adapter 45º G1/4 Black
7 EK-PSC Adapter 90º G1/4 Black
9 Koolance coupling adapter 20mm male-female Black
2 Koolance Fitting Coupling Adapter, *Black* Male-Female 6.5mm
4 Koolance Fitting Coupling Adapter, Swiveling Male-Male
1 Koolance Pressure valve
1 EK-PLUG G1/4" Plexi (LED 5mm)
Pumps: 2 Swiftech MPC-355 (http://www.swiftech.com/mcp35512vdcpump.aspx)
Top pump: Aquacover dual DDC - Top for 2 pumps - Acetal G1/4" (http://shop.aquacomputer.de/product_info.php?products_id=2359)
Tube: PRIMOCHILL PRIMOFLEX™ ADVANCED LRT™ 12,7 MM (1/2") / 19,1 MM (3/4") - BRILLIANT UV BLUE (PFLEXA-34-B) (http://www.primochill.com/index.php?dispatch=products.view&product_id=3)
Fillport: Black POM Universal (http://www.aquatuning.es/product_info.php/info/p2851_Fillport-Black-POM-Universal.html/XTCsid/02nh7eha2osqg36naa3hn070p0)
Liquido: EK EKoolant Clear (premix 1000mL) (http://www.ekwb.com/shop/accessories/water-additives-coolants/ek-ekoolant-clear-premix-1000ml.html) (x2)
Control Panel: Aquaero 5 Pro (http://aquacomputer.de/aquaero-5.html)
Fans: 10 NoiseBlocker SilentFan Pro PK3 x 10 (http://www.blacknoise.com/en/products/it/11/Noiseblocker-NB_BlackSilent_Pro_140mm) + 2 Gentle Typhoon AP-15 (http://www.scythe-usa.com/product/acc/051/d1225c12b1ap_detail.html)

THANKS TO:

A ROG members for their comments, suggestions , support and patience for following

http://rog.asus.com/forum/images/asus/rog_logo.png (http://rog.asus.com/)

Gustavo of

http://imageshack.us/a/img703/5738/7sdm.jpg (http://www.pcrelic.com)

JAPEMO75
09-01-2013, 12:04 AM
BUY IT!!!

LIQUID COOLING

Recovering photos...

Fittings...

http://imageshack.us/a/img801/9223/img1752marcobnb.jpg

GPU block...

http://imageshack.us/a/img832/7245/img1748marcobnb.jpg

Keyboard, Gigabyte Aivia Osmium

Recovering photos...

Power supply, Corsair HX Series HX1050 Gold

Recovering photos...

Motherboard, Asus Maximus V Formula

http://imageshack.us/a/img96/7013/img1350marcobnb.jpg

http://imageshack.us/a/img22/4350/img1354marcobnb.jpg

Monitor, BenQ RL2450HT

http://imageshack.us/a/img854/3110/img1421marcobnb.jpg

http://imageshack.us/a/img694/4216/img1423marcobnb.jpg

Control panel, Aquaero 5 Pro & accesories

http://imageshack.us/a/img594/3602/img1622marcobnb.jpg

http://imageshack.us/a/img839/5878/img1625marcobnb.jpg

http://imageshack.us/a/img713/285/img1628marcobnb.jpg

http://imageshack.us/a/img803/258/img1629marcobnb.jpg

http://imageshack.us/a/img28/820/img1635marcobnb.jpg

http://imageshack.us/a/img593/4602/img1637marcobnb.jpg

Fans, NoiseBlocker SilentFan Pro PK3

http://imageshack.us/a/img607/5461/img1745marcobnb.jpg

Case, LD Cooling PC-V7 280/420 Black

VERY SOON...

JAPEMO75
09-01-2013, 12:05 AM
3D MODEL

GPU backplate

http://imageshack.us/a/img829/5941/backplatevga1.jpg

Anticiclon

http://imageshack.us/a/img829/9275/anticiclon3.jpg http://imageshack.us/a/img248/19/anticiclon1.jpg http://imageshack.us/a/img7/5339/anticiclon2.jpg

PHOTOGALLERY

backplate & block for GPU

http://imageshack.us/a/img13/8236/img1345marcobnb.jpg

http://imageshack.us/a/img717/9819/img1390marcobnb.jpg

http://imageshack.us/a/img707/1520/img1391marcobnb.jpg

Grills for fans

Soon...

Anticiclon

http://imageshack.us/a/img716/2508/img1460marcobnb.jpg

Sleeving

Tools Kit & Sleeving

http://imageshack.us/a/img827/5753/img1507marcobnb.jpg

http://imageshack.us/a/img823/4610/img1512marcobnb.jpg

http://imageshack.us/a/img819/8466/img1513marcobnb.jpg

http://imageshack.us/a/img202/4706/img1514marcobnb.jpg

http://imageshack.us/a/img13/9425/img1515marcobnb.jpg

http://imageshack.us/a/img195/5835/img1516marcobnb.jpg

http://imageshack.us/a/img844/9397/img1518marcobnb.jpg

Power Supply...

http://imageshack.us/a/img708/30/img1588marcobnb.jpg

http://imageshack.us/a/img191/3595/img1589marcobnb.jpg

http://imageshack.us/a/img811/5342/img1591marcobnb.jpg

Cable...

http://imageshack.us/a/img542/9366/zwf7.jpg

http://imageshack.us/a/img690/8497/img1527marcobnb.jpg

http://imageshack.us/a/img407/4958/img1528marcobnb.jpg

Fans...

http://imageshack.us/a/img823/2501/3ahr.jpg

http://imageshack.us/a/img543/6218/s9ds.jpg

http://imageshack.us/a/img832/3869/u71n.jpg

http://imageshack.us/a/img585/7661/s684.jpg

http://imageshack.us/a/img163/5002/9y0g.jpg

Aquaero...

http://imageshack.us/a/img542/8642/img1687marcobnb.jpg

http://imageshack.us/a/img5/6791/img1688marcobnb.jpg

http://imageshack.us/a/img27/2480/img1689marcobnb.jpg

LukeeVassallo
09-01-2013, 08:14 AM
Wow ! It looks like it's coming great, nice specifications too ! :)

JAPEMO75
09-01-2013, 02:54 PM
Thanks LukeeVassallo!!!


I modeled in 3D 2 options for fans/rads grills. I like more 2nd option, but in brick better 1st. I want brick following design PC-V7

1st option:


http://imageshack.us/a/img209/362/t5uz.jpg

http://i132.photobucket.com/albums/q18/Coldzero_site/IMG_3662.jpg

2nd option:


http://imageshack.us/a/img43/103/qu6h.jpg

http://cdn.overclock.net/6/6f/6ffdc140_dscn0790wt.jpeg

I think that change all front & top panel, like TJ07 modders, why not? XD.

Fronts:


http://www.coldzero.eu/1479-2577-thickbox_leoelec/custom-illuminated-tj07-front-panel.jpg

Aquaero Pro integrated at top. To add reset & I/O buttons, USB and at the low, 2x140 hex grill with some dateil of mod...

http://www.coldzero.eu/1444-2489-thickbox_leoelec/tj07-front-panel-with-fan-controller-dvd.jpg

I made ​​this design for VGA in 3D. But it has a problem with my motherboard assembly.

Each plate have 3mm thick. When two plates are 6mm plus free space. I currently which is 4 plus free space, and I had to reduce it by the USB 3.0 connector. Therefore, this design that I put this complicated thing. It could cut, but just in that area / corner there is a screw, the upper right.

So my first choice is still full cover plate black with blue lettering to illuminate them from behind. As had now, but without using vinyl comes off with screws.


http://imageshack.us/a/img29/8909/kubt.png

Regards!!!

JAPEMO75
09-06-2013, 04:54 PM
Well guys, I bring you news, Papa Noe arrived!


http://imageshack.us/a/img94/2971/k0mi.png

The ***** is that until Monday nothing. I have to leave the weekend off for personal reasons.

A greeting!

JAPEMO75
09-11-2013, 02:19 AM
Well guys , I finally had some time tomorrow is party advantage to open the packages , so here we go for slaughter .

Fans . This time for the 120x1 radiator I decided to use the Scythe Gentle Typhoon AP -15 . You have to paint them blue ...


[http://imageshack.us/a/img827/949/1g8k.png

Radiators. I am surprised its matte black finish . Perfect for the mod and to match the case .

The 120x1


http://imageshack.us/a/img818/7752/ih1h.png

The 140x2


http://imageshack.us/a/img607/3476/isku.png

The 140x3 . This has been quite marked with friction . But hey , it's pretty superificial .


http://imageshack.us/a/img62/3135/jf7a.png

http://imageshack.us/a/img713/6195/ak7l.png

http://imageshack.us/a/img94/9001/2tde.png

http://imageshack.us/a/img850/2884/3osk.png

The top of the pump ...


http://imageshack.us/a/img31/8259/42d2.png

The tube. It is quite more seen against the light blue . I think I had before is turquoise / lilac .


http://imageshack.us/a/img834/4342/w4s0.png

And finally , the LD Cooling PC V7. A box of truth, is expensive, but the finish is impressive. He has his faults like all that passeth to describe according to the photos, as the absence of filters . The paint is a matte black with a stunning finish . Cuesta to stay brands fingers / hands. Allen screwdriver needed 8 for their M3 screws . We turn to the pictures and reviews ...

Opening the box we find a box containing the legs ( the cambiare by wheels ) , 2 switches Lamptron (I've ordered the 2 blue ) , screws for HDDs / other and USB 3.0 connectors . This we will see if there is a change that I have in mind.


http://imageshack.us/a/img31/5219/bpg1.png

The box itself is quite protected with polystyrene and covered ...


http://imageshack.us/a/img22/7273/yfcr.png

http://imageshack.us/a/img20/9513/3b3x.png

Here the box and unwrapped ...


http://imageshack.us/a/img812/7005/k21h.png

http://imageshack.us/a/img580/4018/4uvq.png

http://imageshack.us/a/img854/8726/zkto.png

The details of how you caught the window methacrylate . You milling milling . The bolts are the most for Curran could have a more beautiful finish . We'll see if there are changes with blind nuts here ... In the beginning was to change the blue UV acrylic one . But to go milling is perfect and aligned with the panel. So I'll leave it well this time .


http://imageshack.us/a/img580/9108/apdi.png

To remove the sides need a screwdriver / allen key . As I have Swith screws looketh if you are worth and cambiare .


http://imageshack.us/a/img401/2019/21jb.png

We spent inside ...


http://imageshack.us/a/img18/6051/uqak.png

http://imageshack.us/a/img138/140/or5x.png

http://imageshack.us/a/img560/571/pts8.png

http://imageshack.us/a/img46/6171/sam4.png

http://imageshack.us/a/img407/8766/7zk.png

http://imageshack.us/a/img854/3148/jeou.png

And of course, we started removing parts ...


http://imageshack.us/a/img842/4741/a0u5.png

I present 140x2 radiator and I'm the first surprise ... NONMATCHING HOLES , so does the 140x3 . The Koolance carry a separation of 20mm while 16mm box . This really is not a problem if you change the front and top panel as I have thought of myself. A part with the screws touch the radiators positions therefore may suffer the odd scratch or bun screws. Another thing to keep in mind when designing .


http://imageshack.us/a/img853/6143/n0oi.png

Here we can see that it can regulate 5mm more or less according to the need of the fans and radiator.


http://imageshack.us/a/img692/381/9wz8.png

Another thing I liked is that you can remove the plate that supports the motherboard. But I do not like to use a different screw . This time is star ...


http://imageshack.us/a/img96/1207/l2db.png

And here is the box with nothing ... Only the main structure. The truth is very wide and with a content size .


http://imageshack.us/a/img822/2175/unpd.png

The motherboard tray comes with many holes to attach accessories , storage , SSDs , etc ...


http://imageshack.us/a/img541/8220/hhh9.png

Finishing touches the photo report now design the top and front panels , painted fans, study some things and dimensions. But all this and seeing what you will go slowly .

Greetings friends!!!

JAPEMO75
09-11-2013, 05:45 PM
Well since I have the final design of the grids. Took me a while to decide, but it's that I like. Both the interior and the exterior will be equal. The exterior because I have yet to see if everything will be aluminum or Plexiglas. There you go ...

The inner top


http://imageshack.us/a/img39/4105/p4l1.png

And on top of aluminum with with grille methacrylate


http://imageshack.us/a/img15/1199/i6lk.png

Inside the front grille


http://imageshack.us/a/img829/4303/ulhj.png

And the aluminum front with grille methacrylate


http://imageshack.us/a/img802/6991/1axk.png

And the rear fan


http://imageshack.us/a/img15/4998/qhf1.png

Regards!!!

JAPEMO75
09-15-2013, 08:05 PM
Hi!!

I have been all weekend giving BnB mod. Not change the end panels . The main reason for the change was that it did not overlap the distance between fans and therefore the holes. But I happened to catch the file and make the hole a tad longer , instead they were circular. And the result has been good , with consequent savings !

I roll over and I show as I have the project. Before doing anything I preferred to present / assemble everything and so go looking possibilities and if prompted follow the script that had established . I 'll go commenting ...


http://imageshack.us/a/img43/4264/bqcw.jpg

http://imageshack.us/a/img708/1927/g0c8.jpg

This place still no where lol, something so small. Surely nearly of aquaero or pumps..


http://imageshack.us/a/img713/2852/1s9t.jpg

The switches and USB 3.0 are not placed poruqe sleeve that I have that make me still some left. Besides not know if this will put LD Cooling panel or the Switch 810 that I have saved . A part of the conetores USB 3 carries audio , rear leds switch and card reader ...


http://imageshack.us/a/img7/9146/a9n2.jpg

A large box for one or two radiators , but if you stick another be carefull.. Scares me when I have to put the tube down the little space you have to stop putting a finger ...


http://imageshack.us/a/img203/9663/jjzk.jpg

http://imageshack.us/a/img823/3641/oplq.jpg

http://imageshack.us/a/img812/1398/s7dj.jpg

Reservoir with extras . Led warning aqueaero temperatures , over pressure safety valve ( not liquid spits as many believe. These air that is expelled due to overpressure . If the valve is near the liquid or within the circuit if ejected. But is placed in the top of the tank ( not sharing circulation ) at fill and ready ...


http://imageshack.us/a/img833/8559/d0zi.jpg

A filter for impurities that may arise ( plastic chips / acetal , copper , paint, ... ) with 1 valve on each side to open the circuit to the minimum leakage and rotary fittings to unscrew . To this I have to make a good support. These are a few props rotating (elbows , 45, rotating , ...) and is fixed ...


http://imageshack.us/a/img196/173/fm71.jpg

To detail the back of Aquaero and block cooling option ...


http://imageshack.us/a/img42/229/5mbm.jpg

The front 140x2 rad , runs push-pull configuration but I detected a fault in the box. It turns out that if you put filters the input, for limparlos have to get everything , heated either the front or the top with fans . Is everything subject to the external grid . So I will fabricarme supports that caught the inside and is rad who hold this if you remove the grille. I'm in the process ...


http://imageshack.us/a/img23/9426/ryzy.jpg

The bottom of the tank , pumps mounted in series and the sensor. Under the HDDs that are bugging me , then I tell ...


http://imageshack.us/a/img707/1140/r8gu.jpg

The pumps and top with more detail. I have to turn the pump so that the cables go forward.


http://imageshack.us/a/img163/8342/y246.jpg

Well, HDDs ... I tell you , I put the radiator with the jacks down, why? Well because the route is so minor, to have bombs at the bottom should go up and then down to the graphics . Then , when emptying / drainage strip all the liquid . Besides , right now I have no place to put a valve and fillport desgüe . Fillport only if, but I love him because having closed valve , tube fitting place it , open the tap and the liquid is going where you want ...

In the following pictures you will see that there is little , or rather no space , salts with elbow 90 or you eat boogers , and there ventis missing interior ...

The solution that had , and still think how to do it without touching the box ( trim, not shoddy power , and had the switch for it, :) ) is to raise the box HDDs keeping silent blocks . They won it in the bottom space and not have to do so much jog , climb down as I do now also , as I said before, a drain in the lowest point of the circuit.


http://imageshack.us/a/img34/4467/zxf5.jpg

Now on to the back ...


http://imageshack.us/a/img856/7066/rbx0.jpg

http://imageshack.us/a/img856/7066/rbx0.jpg

The invention that I have assembled to place the deposit which suits me for the RL . Scraps of laser grid that held before ( switch) the same tank ... The white is the protective plastic .


http://imageshack.us/a/img845/4823/xrk4.jpg

http://imageshack.us/a/img819/9357/k6cp.jpg

And that's it , I still lack a lot, but I think I have much more advanced and where to go to fixed shot . I have to buy more accessories, not many , some elbows , filter (I've broken paws ) , extension and 3-way valve , painted fans, no no, not going to be so , surely some I had already asked / imagined. And Screws . If , at the end just a home hardware . Consequently they are of M4 rads . The box of luck and joy , is M3 and above uses the same screws you buy, semi - round head allen ...

Nothing guys hope you liked it !

JAPEMO75
09-22-2013, 08:37 PM
Good night.

I bring you news of the weekend . They are few and it has taken me a long time painting, re- organization of the RL and the theme upper radiator support . That in the end I'll leave it as it is to have to make , say " odd jobs " .

We started with the placement of wheels with brake ...


http://imageshack.us/a/img203/5783/3f89.jpg

The painted valves, Fittings and adapters, screws and fans . This vetch I used primer and you want to tell . At the screws have stripped paint and I had to sand back and repaint , this time without primer and have been much better , more like box matte black .


http://imageshack.us/a/img822/8836/aqlp.jpg

http://imageshack.us/a/img534/7755/yzz8.jpg

The theme of the front radiator support. Do not know if I said it before , but it only are attached to the front grille. I am going to put a filter on the inside so when you want to clean these filters , radiator with the 4 fans , fittings , etc. ... goes off . So I 've managed with a L and I have done some internal support ... The rivet wanted him put in reverse , but then my turn and I doubt that would come later. So out. Later I will put a cover.


http://imageshack.us/a/img59/3283/o4z7.jpg

http://imageshack.us/a/img849/7629/b7dr.jpg

We begin with the study of the RL . As I missing links, elbows and such, I had to improvise and piecewise fabricarme parts to check its correct position .

I have already solved the issue fillport valve and discharge / drainage system . Besides being the lowest point of the entire system , which will complete emptying , but it is at the bottom of the radiator .

http://imageshack.us/a/img51/528/rrpk.jpg


http://imageshack.us/a/img819/7338/7tj6.jpg

As you can see in the following picture , the valves and adapters and are painted . The filter as comment, you colocare on the back side , just off the upper radiator to so view it through the window.


http://imageshack.us/a/img109/1742/09ht.jpg

Now turn the tank and pump , which do not change their position and flowmeter ...


http://imageshack.us/a/img703/7104/0ko5.jpg

As you see , it's all designed to facilitate drainage, all sloping down and ...


http://imageshack.us/a/img20/3576/22g3.jpg

And last but not least . The filling and emptying fillports already placed . In the filling I decided to place him safety valve , thus saving me a T in the warehouse , in addition to being on the highest point which is where the air will accumulate ...


http://imageshack.us/a/img202/6247/ju93.jpg

http://imageshack.us/a/img834/4445/0m9l.jpg

And that's all for now ...

A greeting!

JAPEMO75
10-11-2013, 07:37 PM
Well guys , sorry for the delay. Here you have the photos . It is not so much what you bought, and I said that they were fittings , filters, screens and a little something more ...

The filters , which added to the 4 that I have , the dust will not be as present inside the box.


http://imageshack.us/a/img823/3039/5qjl.jpg

Grids . In the end I opted for these , no custom grids . Why? Because I like to be bastnte classic and simple. On the other hand to be universal and can be used in the future.


http://imageshack.us/a/img43/9621/m7kb.jpg

The fittings were missing me ...


http://imageshack.us/a/img34/2451/kbk9.jpg

And finally , the enigma. Turns out the other day riding the board, I noticed that the RL circuit side of the base plate was a bit low . Remove the block and it turns out that the tube had cracked and was bent . The inventions end up paying ... And so , for the PB block the song ...


http://imageshack.us/a/img32/3016/zbhk.jpg

http://imageshack.us/a/img716/7135/dxw9.jpg

And you have the pictures lol. Today I'll rest and tomorrow morning , get to work . I have enough gigs, paint some fittings , brackets do HDDs and pumps ...

Good evening friends !!!

JAPEMO75
10-13-2013, 05:36 PM
Well , Sunday afternoon , trapping , and have to give an account of what happened ...

Yesterday was of low productivity , to stagnate and go round and round the HDDs , pump, flow sensor .. Tovia nothing I have not clear . In addition , to buy the block Motherboard , this brings a block to the Southbridge , because we will have to use it , therefore , I now still missing fittings ... FOr otr hand, by space , I had to sacrifice the DVD drive, not that much but would use it always good to have it. So we'll see if it drops a slot-in drive ...

The RL until next month nothing perpo nothing happens. I 've noticed that I have work to do :

- Sleeve new box fans
- Add / make wires / splitters new . The 5 happens to be 6 , the 2 I use , but there is a new one, the 4 ...
- Pegatas back to the fans ...
- Other things that arise (not much because I scripted ... )

That said , the first motherboard with more blocks ...


http://imageshack.us/a/img818/117/wjli.jpg

As I have the Switch 810 little things , because I'm going to take advantage , so the LEDs to illuminate the rear ...


http://imageshack.us/a/img27/4598/cgcb.jpg

http://imageshack.us/a/img844/628/b9ui.jpg

As the PC -V7 only has 2 USB 3.0 front and nothing else, then to recycle . I took the front of the switch that brings the addition of 2 USB 3.0 , 2 USB 2.0, card reader , reset, to turn on the LEDs and connections typical micro / speaker


http://imageshack.us/a/img443/74/kqz7.jpg

http://imageshack.us/a/img7/1422/7bgp.jpg

http://imageshack.us/a/img844/8856/n3od.jpg

http://imageshack.us/a/img842/7168/b6fy.jpg

Methacrylate plate was left a hole is underneath and has ocurido m as placing a plaque and the idea is that the LED is on, in other words, will be lit while the pc is turned on ..


http://imageshack.us/a/img837/5931/1etu.jpg

As I did not like the idea that the bombs were above a sponge with the lack of refrigeration of both to be fully covered , I made ​​a stand with silent blocks ...


http://imageshack.us/a/img819/6141/yuc9.jpg

http://imageshack.us/a/img191/4782/kmq9.jpg

We already finished and assembled ...


http://imageshack.us/a/img850/3571/n9yz.jpg

http://imageshack.us/a/img202/7678/ulfn.jpg

Detail...


http://imageshack.us/a/img812/7696/03pt.jpg

I changed the window nuts and acorn nuts I put black painted ...


http://imageshack.us/a/img850/3081/yu0v.jpg

Sleeve Lamptron switch ...


http://imageshack.us/a/img545/6210/nwz8.jpg

http://imageshack.us/a/img844/714/90wp.jpg

And now the problematic . According to the photo you post the other day


http://imageshack.us/a/img703/7104/0ko5.jpg

It commented on the issue of drains, etc. lowlands . But today I remembered that radidador is divided into 2 and therefore only to empty the radiator side of the circuit, the rest not . I set aside post it happen the same. The only solution is to perform a bypass between exits the radiator and in case you want to empty , open valve and then, if done completely emptied . Well the theoretical is very easy ... The practice ...

1. Lesson .

Seemed to be clear the position of the HDDs , well, the dilemma comes in that box weighed hard drives , and I do not trust that you flying with something made ​​by me. Total , this morning and almost all day yesterday, moving hard drives , storage , pumps ... crazy. In the end I found a possible sloucion and that also is great for the bypass . Problem , the bomas are very close to the radiator . Is to change the order of things . That is, the HDDs are now paid alinmentacion source . Problem to be the warehouse , just past, justito .


http://imageshack.us/a/img11/8380/5srj.jpg

I have no pictures of the rest , I missed completely. It is that now the warehouse has to empty side. The pump will be right below , and here is where the first problems I encounter . Being so close to the radiator / fans , almost no place to put 2 fittings . It could pump Fittings together with the radiator, but these , I transmit sound vibrations and as consequence . Another problem I see , Hard Sayings of placing the well , is that if you want to get any, have to remove a lot of things , including RL .

Here this what I have to study more ...

I leave it for today , I will rest and cervezon that Ganao me ! !

A greeting

JAPEMO75
10-20-2013, 07:16 PM
Finally today I was able to spend some time to mod and I focused on the position of the HDDs and so settle the matter once and for all.

I made the plates to up HDDs case ...


http://imageshack.us/a/img801/5533/dal8.jpg

Here placed ...


http://imageshack.us/a/img708/4388/9ro8.jpg

And here the whole ...


http://imageshack.us/a/img819/678/vwrz.jpg

As you have seen is quite high , is to pass the tube above the pumps.

And now the fixing plate to the motherboard ...


http://imageshack.us/a/img571/3805/g60h.jpg

http://imageshack.us/a/img580/4433/o7w6.jpg

And are now drying the plates with a layer of black paint ...

And finally , I show the idea of ​​the bypass on the radiator to drain the circuit 9X % . I say the 9X % because there is always something. I just need a T, another valve and some recoreria adapter . I thought I would fail more .


http://imageshack.us/a/img32/7928/96is.jpg

I'm aware of some new backplates for VGAS . The current , to be vinyl , remove and replace both have been off / scratched in some areas . No place if all black and the same design I had.

To whet time I dedicate to wire the fans that there is still what I have forgotten , I am too lazy to get to the sleeve ...

Regards!!!!

JAPEMO75
11-03-2013, 06:51 PM
Good afternoon friends.

Today I have put a little bit with the mod.

I modified the front radiator support because I did not like was...


http://imageshack.us/a/img17/6661/elh3.jpg

http://imageshack.us/a/img196/686/v607.jpg

http://imageshack.us/a/img707/2871/y63o.jpg

After applying matte black vinyl ...


http://imageshack.us/a/img18/3484/slkl.jpg

http://imageshack.us/a/img27/640/42fe.jpg

With the radiator is placed this gap is free ...


http://imageshack.us/a/img543/5900/02o3.jpg

I've also painted two fans to see the issue ... and the result is as expected. Therefore, to buy more cans of paint and paint all the fans ...


http://imageshack.us/a/img547/1171/dz9x.jpg

Here you can see the supports HDDs box and painted ...


http://imageshack.us/a/img405/3436/4gaw.jpg

And finally as fans are painted with filters in front ...


http://imageshack.us/a/img818/2118/difj.jpg

The lighting does the rest ...

See you soon!!!

japemo
12-22-2013, 08:26 PM
Good evening friends !

Finally today I was able to get the mod.

Today I've been painting the rest of the fans and 2 pieces of RL ( T & valve ).

The Nidec ...


http://imageshack.us/a/img853/6081/58aw.jpg

The Noiseblocker ( In photo only taken 4 but were 10 in total)


http://imageshack.us/a/img4/4610/ev8w.jpg

Then I have started with the upper radiator support . Now I will not have problems if you want to get the upper filters.


http://imageshack.us/a/img35/272/hvst.jpg

Some cuts in the original top piece to anchor the support ...


http://imageshack.us/a/img46/1138/s4mv.jpg

And placed bracket with the radiator ...


http://imageshack.us/a/img546/2262/f5cb.jpg

Side view, the guides I've put them rivets , so is much safer .


http://imageshack.us/a/img12/5205/rkil.jpg

Top view ...


http://imageshack.us/a/img856/9536/53u4.jpg

Tomorrow I rise up early and I'll get back again to work .

A greeting!

JAPEMO75
12-29-2013, 10:48 PM
Good evening friends.

As comment and given the success with backplates, prices and giving me problems with letters, in the end I decided hacermelas myself. They are simple, but they love me as they have been.

Pre-trimmed and sanded, and presenting them to the GPU ...


http://imageshack.us/a/img199/1875/ewhr.jpg

http://imageshack.us/a/img844/481/c563.jpg

And here already screwed ...


http://imageshack.us/a/img62/4256/nnpe.jpg

http://imageshack.us/a/img9/9543/85n7.jpg

http://imageshack.us/a/img844/5146/30kl.jpg

That's all for now, hope to catch soon (I get much stick) with the wiring of the fans ...

Greetings and Merry Christmas!!!

JAPEMO75
01-15-2014, 12:58 AM
Good evening friends. I bring a new acquisitions today. It would have been better in blue but the quality and features have made me sacrificing illumination. (Will inquire if you can change the lighting in blue)

I present to Razer Taipan!

http://imageshack.com/a/img62/7782/1hcv.jpg

http://imageshack.com/a/img198/2932/ugms.jpg

http://imageshack.com/a/img69/3008/7yrg.jpg

http://imageshack.com/a/img38/9364/7r33.jpg

http://imageshack.com/a/img19/8610/bf1p.jpg

The old Razer Diamonback 3G and Young Taipan

http://imageshack.com/a/img197/4425/tnz8.jpg

http://imageshack.com/a/img600/5163/8urd.jpg

Without the Razer software, as such, the wheel is always lit and the logo turns off and lights up slowly, like a heartbeat ...

http://imageshack.com/a/img43/5619/ojna.jpg

http://imageshack.com/a/img22/7862/99dc.jpg

A greeting!

abvolt
01-15-2014, 06:14 AM
awesome looking build man.

Nate152
01-15-2014, 06:41 AM
Hi JAPEMO75, Looks super nice and is coming along nicely. I like the home made GPU back plates, very inovative. Good choice on the Razer Taipan, I had the Razer Lachesis and I did not like the way it fit my hand. I have kind of big hands and that mouse is flat. After a while it started acting up with the curser jumping all over the place so, you know what I did? I took it out in the driveway and I smashed it as hard as I could with a sledge hammer. Throwing that thing in the trash just didn't seem good enough. I want to see your build when it is completed so please more pictures.

Pendragon20
01-15-2014, 09:20 PM
Awesome build Man...!!!

JAPEMO75
01-15-2014, 09:26 PM
Good evening friends. Today I've been and I've been wanting to get for a while ... So there are advances

First I open the mouse to see what had led ... bad luck, led back normal , the wheel is a plate with micro pcb leds smds ... So unlucky ...

Today I bought screws M3x6 black star, allen you'll quickly passed . Moreover, even bringing the box rust, imagine if on top has a wet environment RL ...


http://imageshack.com/a/img6/5262/f9ci.jpg

Now I have also purchased the LED strips , 2m blue and 1 white ...


http://imageshack.com/a/img30/4250/dpcw.jpg

I already have the cable ready for the front fans and placed the ventis , filters and cables ready to connect


http://imageshack.com/a/img849/2167/xxz2.jpg

http://imageshack.com/a/img13/7270/buql.jpg

And I made two small modifications to the upper guides to the radiator. Removed rivets and screws placed , so you can adjust the height and colocaqcion vinyl . The result is obvious


http://imageshack.com/a/img843/6605/bivi.jpg

http://imageshack.com/a/img833/4285/ozz6.jpg

http://imageshack.com/a/img24/618/4kqc.jpg

http://imageshack.com/a/img196/8748/go96.jpg

http://imageshack.com/a/img4/4812/vvjd.jpg[/url]

Finally I have started with the cable upper radiator. 6 ventis ! I already have a cable with 3 ... Foul other and merge 2 ... more

Tomorrow I hope to progress a little more for the cable end ...

A greeting!

JAPEMO75
01-23-2014, 09:36 PM
Good night. This afternoon I put another little while and I finished 6 shots and cable sheathing the nidecs.


http://imagizer.imageshack.us/v2/800x600q90/571/5g94.jpg
http://imagizer.imageshack.us/v2/800x600q90/546/hknb.jpg
http://imagizer.imageshack.us/v2/800x600q90/856/75zw.jpg
http://imagizer.imageshack.us/v2/800x600q90/594/seyw.jpg

And nidecs


http://imagizer.imageshack.us/v2/800x600q90/716/dfnb.jpg
http://imagizer.imageshack.us/v2/800x600q90/547/aaux.jpg

Tomorrow to see if I can make the cable for nidecks ...

A greeting!

mob bob
01-23-2014, 11:36 PM
Hi, Is this build complete yet ?

JAPEMO75
01-23-2014, 11:39 PM
No I'm still on it. It has been delayed due to lack of time and work ... : (

JAPEMO75
01-25-2014, 01:18 AM
Hi!!!

Very tired after a day's work and then with the mod, but comfortable . I just picked up all our gear .

Finishing the cable to the rear double Nidecs and after that , the test . Checking all ventis with cables ...


http://imagizer.imageshack.us/v2/800x600q90/59/4zpw.jpg

The result ... A little scare, one Nidec not work. Identified the fault, wrong order of the wires in the connector ... ALL FANS AT 100 %!

I have that weight lifted off because the gigs have been good measure, do sleeving and welding ... The welder I have not warmed much in the end and I 've seen and wanted to solder the wires to the strip, above points are very close ...

After that I have started with white LED strips. I cut two pieces of 5cm with 3 leds , cable, solder sleeve and ...


http://imagizer.imageshack.us/v2/800x600q90/31/4zpg.jpg

Where? In the first time I go to put the cable with 2 leds of the switch first, I 've reused cables and wuala !!!


http://imagizer.imageshack.us/v2/800x600q90/706/zljn.jpg

http://imagizer.imageshack.us/v2/800x600q90/593/c1ba.jpg

Unlucky PCB blank , if black would already perfect . To light switch will use the front switch brings the 810 you save it as you know.

Tomorrow if I can ... more

JAPEMO75
01-26-2014, 08:58 PM
I've had some kinks to carry the rear rad tubes that acts between gpus and cpu ... At the end I solved this way:

Fan out ...


http://imagizer.imageshack.us/v2/800x600q90/46/7aj9.jpg

http://imagizer.imageshack.us/v2/800x600q90/35/56j5.jpg

And the tubes or crossed ...


http://imagizer.imageshack.us/v2/800x600q90/834/wmkh.jpg

Once fixed this , Unused I needed to put the flowmeter , therefore, all the RL and testing it mounted adapter. In the first half hour ... leakage ups ! ! Nothing an extension board with very little to no pressure on the T. Changed and back on track .

To clean the circuit , distilled water, vinegar, and h7 Viakal ... I think anything that resists lol ...

This is nothing compared to what has been busy ...


http://imagizer.imageshack.us/v2/800x600q90/46/svxc.jpg

I had to drain and refill the circuit does not know how many times I've lost count ... Now , **** through a tube ...


http://imagizer.imageshack.us/v2/800x600q90/34/55wl.jpg

Said this a photo of the current state ...

The front with LEDs already placed , is like the original ...


http://imagizer.imageshack.us/v2/800x600q90/706/i5uk.jpg

Detail drain, and almost entire points except the cpu, the bracket of the gpus and aquaero remains a tad lower empties the top of depo ...


http://imageshack.com/a/img593/268/5xgi.jpg

For Poweradjust I used the original cover to dock it , so yes, no holes, double sided tape and a craft deck methacrylate and ready ...


http://imagizer.imageshack.us/v2/800x600q90/823/0lz8.jpg

http://imagizer.imageshack.us/v2/800x600q90/547/7e9z.jpg

Supports that I have managed to set the valves to remove the filter are that the circuit is empty . These are acrylic , but departed one and made ​​of aluminum ..


http://imagizer.imageshack.us/v2/800x600q90/854/3b6d.jpg

http://imagizer.imageshack.us/v2/800x600q90/15/a4cz.jpg

http://imagizer.imageshack.us/v2/800x600q90/849/98ig.jpg

And an overview ...


http://imagizer.imageshack.us/v2/800x600q90/203/2eu2.jpg

That's all folks , this weekend has spread much , if not for the time I 've thrown up your ass would have more rad ...

A greeting!

JAPEMO75
01-30-2014, 10:37 PM
Well, I have made ​​changes. I hope you enjoy it, I just love how I have been, but clear the box and released the front tube with the filter that did not quite like it.

First of all, Fittings Unused me ...


http://imagizer.imageshack.us/v2/800x600q90/89/oqb6.jpg

The pump after changing the adhesive foam rubber sponge to buy today ...


http://imagizer.imageshack.us/v2/800x600q90/837/9ns1.jpg

And changes in the RL


http://imagizer.imageshack.us/v2/800x600q90/41/xvhv.jpg

http://imagizer.imageshack.us/v2/800x600q90/713/mz1i.jpg

I have to change the tube on the graph to the upper rad because I've been a little short, a little forced and this is not good ...

Tomorrow will do the change this and much more ... I have another week full dedication

A greeting!

JAPEMO75
02-06-2014, 04:13 AM
Good night, almost days .

The holiday week is given on whether and I have not dedicated 100%. I bring more progress

I 've made ​​acrylic panels to hide the "ugly " the pc ...


http://imageshack.com/a/img560/277/fg0x.jpg

These panels can be removed and replaced very easily. The velcro adhesive tape is to blame


http://imageshack.com/a/img856/5909/azik.jpg

http://imageshack.com/a/img845/904/q2lo.jpg

Now new acquisitions a more poweradjust and the front in black . And as cable manufacturing


http://imageshack.com/a/img837/8531/fm6u.jpg

http://imageshack.com/a/img833/315/kp6t.jpg

the front ...


http://imageshack.com/a/img560/4955/j0ed.jpg

After connecting all wiring (less than the power supply ) to the motherboard , I have started to work with the lighting .


http://imageshack.com/a/img534/3199/wp1h.jpg

I knew the Aquaero can handle using 2 channels having other accessories , including the LED strips. Panel a little tinkering I managed to find the operation . I can adjust the intensity from 0 (off ) to 100% ( maximum) . I have also turned blue filter to lcd adhesive aquaero .


http://imageshack.com/a/img855/1084/6epf.jpg

http://imageshack.com/a/img823/5826/uzfy.jpg

http://imageshack.com/a/img812/4183/p4ne.jpg

Tomorrow another while and if all goes well , the montage is successfully completed , finally! !

We will check the status of hardware ... I hope I do not take no surprise , again ...

:clap:

JAPEMO75
02-06-2014, 03:40 PM
Finally finished the mod, get some nonsense , but I have to find some pieces , when you find the colocare but is a minudez . Now we just turn on and check that the hard work as you run , install and configure everything that is no small feat ... Had said the action of the evolution of day

Lined front panels and placement of LEDs ...


http://imageshack.com/a/img853/3428/ppn7.jpg

http://imageshack.com/a/img546/2963/bvur.jpg

http://imageshack.com/a/img691/9883/zkjw.jpg

Place this and some cable that was outstanding ... We spent the interior ...


http://imageshack.com/a/img198/4069/1mrm.jpg

http://imageshack.com/a/img513/4821/mmuf.jpg

http://imageshack.com/a/img802/6056/eeo4.jpg

http://imageshack.com/a/img593/496/uw6s.jpg

http://imageshack.com/a/img203/3415/9xri.jpg

http://imageshack.com/a/img594/6370/hdxh.jpg

The surplus of the anticyclone ... Meet your luxury !


http://imageshack.com/a/img823/6350/05ni1.jpg

http://imageshack.com/a/img844/4931/3byr.jpg

http://imageshack.com/a/img547/5160/njrl.jpg

We spent abroad. The back , which leads mia mother ... Removes much pon pon, but the end result I like ..


http://imageshack.com/a/img163/6218/w2le.jpg

Back


http://imageshack.com/a/img703/3474/b6re.jpg

http://imageshack.com/a/img577/9756/1ffs.jpg

Front


http://imageshack.com/a/img802/893/9kqn.jpg

Detail


http://imageshack.com/a/img838/5589/orpl.jpg

Vision of the whole box without side panel ...


http://imageshack.com/a/img841/6346/uz3j.jpg

With the side window panel...


http://imageshack.com/a/img513/305/2jsm.jpg

I promise more photos maintained and lighting . Today I have no time for anything more and more . I hope you liked it ...

A greeting!

JAPEMO75
02-22-2014, 03:22 PM
Hi friends. A litle upgrade.


http://i57.tinypic.com/30tm5uq.jpg

A new toy, Asus Xonar Essence SRX...


http://i60.tinypic.com/9fqq0z.jpg

http://i62.tinypic.com/21cuiat.jpg

http://i62.tinypic.com/4r2li8.jpg

http://i60.tinypic.com/1zphzjn.jpg

http://i59.tinypic.com/2133y2e.jpg

http://i61.tinypic.com/2ntept4.jpg

http://i57.tinypic.com/atrocz.jpg

http://i57.tinypic.com/35i1y6x.jpg

Regards!!!

hero1
02-27-2014, 10:26 PM
Good stuff Japemo. I like the LEDs and I am jealous of your STX card!

JAPEMO75
09-28-2014, 09:10 PM
Final photos

http://i61.tinypic.com/2l8dleh.jpg

http://i58.tinypic.com/11ta6me.jpg

http://i61.tinypic.com/azb1g7.jpg

http://i60.tinypic.com/72qe6f.jpg

http://i60.tinypic.com/725bfo.jpg

http://i58.tinypic.com/xanmo0.jpg

http://i62.tinypic.com/231t7a.jpg

http://i61.tinypic.com/2ahzn1e.jpg

http://i62.tinypic.com/294km8j.jpg

http://i58.tinypic.com/24gp1qt.jpg

http://i58.tinypic.com/dvivqp.jpg

http://i62.tinypic.com/9s9hj6.jpg


Videos


http://youtu.be/qnlTYTPntpM


http://youtu.be/BYXOwp0OnRU