PDA

View Full Version : watercooling 660ti



daddyhall
09-26-2013, 12:12 AM
I have 2 asus 660 ti 3gig graphics cards that I would like to add to my loop. the problem is I notice the heat sinks on the 2 gig cards and the 670 are different. I am not having any luck finding a water block for the cards that I have. here is the link to what I have
http://www.newegg.com/Product/Product.aspx?Item=N82E16814121767

If someone knows of a block, I would love to know so I can use these cards to the full. I have had to undervolt and underclock so they would run without overheating. thanks again

abvolt
09-26-2013, 12:23 AM
Have you looked at frozenpc.com or performance-pc.com they have lots of good stuff check it out.

daddyhall
09-26-2013, 12:39 AM
I have been looking pretty hard the last few days, cant remember where all ive looked. I will double check to make sure I didn't overlook somethink. Thanks for the quick response

Rockford
09-26-2013, 01:42 AM
Hello, everything is possible

do you got pics, showing the gpu (pcb= no cooler attached), and the ram/vrm heatsink?

Rockford
09-26-2013, 01:49 AM
Ok, block is no prob.. you got the "wide socket holes"

Now for the heatsink, the dc2 can be tricky with custom water blocks..

Cant find a photo showing the actual heatsink..

26780

daddyhall
09-26-2013, 02:29 AM
The cards are still in the rig. My pcb is actually alittle shorter and connectors plug in from the back instead of the side. I will pull a card and take some pics and post when in can

Rockford
09-26-2013, 02:44 AM
i know some dc2 stock heatsinks (7970) for example, require some modification to fit a universal gpu block, the heatsink is very tight around the socket area..

Unless you dont use a crapload of spacers block-gpu

But that isnt a good solution i think, 1 mm copper spacer OK (and wont interfere with the cooling performance),

1 pcs not more..

Clock is past adult now over here, need to go spook spotting in a hurry, but i will drop in tomorrow..

ZZ

26781