PDA

View Full Version : "BATTLEFIELD 3" PC Case Mod



MonsterMawd
10-04-2011, 07:26 PM
Here is the "BF3" theme case mod in anticipation of Battlefield 3 (http://www.battlefield.com/battlefield3): BF3 release on 10.25.2011 by Electronic Arts. Fractal Design's Arc Mid tower case was chosen for the project and this PC will be displayed at Fractal's booth, on the main floor of 2012 CES, in Las Vegas

Investigative review of Fractal Design (http://www.fractal-design.com) new "Arc" Midi Tower Case.

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech1.jpg


some of the pc case modding products we may be using for this project

http://www.mnpctech.com/0fangrill_casemod_mnpctech.com_Targeted1.jpg

Fighter Pilot Toggle Switches, http://www.mnpctech.com/spdprtToggle.html

http://www.mnpctech.com/toggle_switch_pilot_pc_case_mod_compact_black.jpg

To re-assemble the Corsair 900D chassis, I used these Black Powder coated PC chassis pop rivets

http://www.mnpctech.com/pop_rivet_black_computer_case_chassis_doomed.jpg

http://www.mnpctech.com/Pop_rivets_for_computer_case.html

Pop Rivet Gun

http://www.mnpctech.com/Pop_Rivet_Guns.html

http://www.mnpctech.com/pop_rivet_blind_tool_gun_computer_case_chassis.jpg

Creating the riveted exterior

Black PC Sleeving Kit

http://www.mnpctech.com/PC_Cable_Wire_Sleeving_Kit.html

Fractal design Arc Mid tower fully dismantled for custom paint.

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech2.jpg

The name badge in the bezel was filled with Evercoat's Everglass" Fiberglass "short hair" filler.

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech3.jpg

After sanding the filler with Medium Grit sandpaper..

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech4.jpg

Scuffing surface of steel chassis parts, plastic bezel with Red Scothbrite Pad, to create paint adhesion for the Primer.


http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech5.jpg

Dissected and Magnified each segment from camouflage pattern on 8.5" x 11" paper. Each segment was traced and cut in cardboard for individual stencils.

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech5a.jpg

RUSTOLEUM Specialty series "camouflage" paints. I purchased these from Home Depot

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech8.jpg

Camouflage paint job is finished.

The FD front grill is very mush like Mnpctech's Modders Mesh, http://www.mnpctech.com/ModdersMesh.thm.jpg

http://www.mnpctech.com/ModdersMesh.thm.jpg

I'll be installing 120mm Logysis Green LED cooling fans, http://www.mnpctech.com/LED_Computer_Fan.html

http://www.mnpctech.com/1Green_led_computer_fan.jpg


http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech7.jpg

Camouflaged motherboard tray? Yes, the entire interior was painted.

http://www.mnpctech.com/BlackRecessedHandles.jpg (http://www.mnpctech.com/BlackRecessedHandle.html)

For a rugged military look, we chose these recessed PC case handles, http://www.mnpctech.com/BlackRecessedHandle.html

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9a2.jpg

The recessed PC handles are ready for installation and spring loaded, so they don't flop while transporting your PC.

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9b.jpg

Using stencil included with handles along with measuring square to determine exact location for the recessed PC handles

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9c.jpg

Using 1.5" Dremel reinforced cutting wheel (http://www.mnpctech.com/DremelDisc.html) to cut opening for recessed PC handles
(http://www.mnpctech.com/BlackRecessedHandle.html)

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9f.jpg

Using 1/4" drill bit for mounting holes of the recessed handles.

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9d.jpg

Cutting 3/16" thick aluminum Diamond Plate to use as accent plates for the handles.

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9e.jpg

Khaki base coat applied to the Diamond Plate accent plates.

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9g.jpg

Recessed PC handles (http://www.mnpctech.com/BlackRecessedHandle.html) and diamond plate installed and painted.


http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9a.jpg

Airbrushed effect of side panel being peeled back by <a Mnpctech custom painter (http://www.mnpctech.com/casemodstore.html), Brad Galvin.

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9i.jpg

Brad's weapon of choice, Iwata's HP-CH airbrush gun.

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9j.jpg

Glowing effect airbrushed on the BF3 Marine.

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_pc_case_mod_outside2.jpg

Black outline airbrushed on BF3 Marine. A flat clear will be applied over the finished mural.

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9l.jpg

with Brad's guidance, I airbrushed the bullet holes and scratched paint effects on the access panel. I started with the easy task of filling the BF3 stencil on the left side panel.

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9m.jpg

Steven_belfast
10-06-2011, 12:43 AM
Dam thats a sexy case.
Well done folks looks nice.

Jaytheredneck1
10-06-2011, 02:54 PM
Wow that is awesome. I so wanted to build my BF3 rig with a military theme, but I'm no painter and I could not find anything even remotely resembling a militaristic looking case on the market. That was the final deciding factor that m,ade me change my plans and switch from a sabertooth to a CHV. I love those handles, they look like ammo box handles.

Brian@ASUS
10-06-2011, 05:25 PM
that is some awesome work! what mobo do you plan to use? a sabertooth with the thermal armor painted camo would be awesome!

Jaytheredneck1
10-06-2011, 05:37 PM
Yes it would Brian, yes it would.

Area 66
10-06-2011, 05:51 PM
that is some awesome work! what mobo do you plan to use? a sabertooth with the thermal armor painted camo would be awesome!

I guess you already see the one Bill have done ?

chrsplmr
10-06-2011, 06:45 PM
MM, Your top shelf Mods never cease to amaze and inspire me. ThankYou.

Brian, yes....SaberTooth is the perfect board for that, in my humble opinion also.
Or that new Rampage that you and Raja were talking about...
What were the specifics of that again?
Could you re-post those close up pics again?
hahahahhaa(Hey, I had to give it a shot brother.hehehe)

The SaberTooth would be really perfect.

Area 66
10-06-2011, 06:54 PM
Chrs , Bill ( MM ) make one few months ago with a Saber

http://www.mnpctech.com/casemodblog/2011/06/19/custom-painting-the-asus-p67-sabertooth-tuf-motherboard/

G4MER
10-06-2011, 09:24 PM
I have been watching this MOD on Facebook.. I think its Outstanding!

MonsterMawd
10-07-2011, 12:29 PM
Thank you! whats your name on fb?

the window frame is upcoming modular billet kit I'm working on..

Should be listed on Mnpctech (http://www.mnpctech.com/casemodstore.html) in few weeks

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_billet_window_mnpctech4 .jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_billet_window_mnpctech1 .jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_billet_window_mnpctech6 .jpg

DarthBeavis
10-07-2011, 03:43 PM
Bill who commissioned this (if you are able to say)?

pcjunkie209
10-07-2011, 06:57 PM
Nice Bill! As always!:)

MonsterMawd
10-12-2011, 12:26 PM
@Darth, I'm hoping to give it away at CES...still working out details

@Lee, thanks bro!

Painting the machined aluminum bullet thumbscrews (http://www.mnpctech.com/Bullet-Thumb-Screws.html) to look more authentic.

http://www.mnpctech.com/bullet.thumbscrew.mnpctech.com1.jpg

http://www.mnpctech.com/bullet.thumbscrew.mnpctech.com2.jpg

The surface is first prepped, using red scotch brite pad to scuff the bare aluminum
http://www.mnpctech.3dpixelnet.com/picture_library/wolfensteincasemod.casemodblog9z9z9l.jpg

Is that a "cribbage board" for thumbscrews?, drilling holes in a piece of wood, works great for holding thumbscrews for paint. The threads were taped off.
http://www.mnpctech.3dpixelnet.com/picture_library/wolfensteincasemod.casemodblog9z9z9m.jpg

For maximum paint adhesion, we use SEM brand self etching primer for the base coat
http://www.mnpctech.3dpixelnet.com/picture_library/wolfensteincasemod.casemodblog9z9z9n.jpg

A couple coats of grey self etching primer
http://www.mnpctech.3dpixelnet.com/picture_library/wolfensteincasemod.casemodblog9z9z9o.jpg

for holding the bullet thumbscrews, tape the bullet thumbscrews to paint stick

http://www.mnpctech.3dpixelnet.com/picture_library/wolfensteincasemod.casemodblog9z9z9p.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/wolfensteincasemod.casemodblog9z9z9r.jpg

Paint entire bullet first copper color first, mask off the tip after cured, then paint the shell brass color.

http://www.mnpctech.3dpixelnet.com/picture_library/wolfensteincasemod.casemodblog9z9z9s.jpg

After the paint has cured, I dry brushed the shells with "Antiquing Gel" by Home Decor. "Dry brushing" means you are painting with a brush that is almost 100% dry. It's an easy way to create a weathered effect or highlights. These are machined aluminum bullet thumbscrews (http://www.mnpctech.com/Bullet-Thumb-Screws.html)

http://www.mnpctech.3dpixelnet.com/picture_library/wolfensteincasemod.casemodblog9z9z9t.jpg

After 2 hours, the "Antiquing Gel" had cured. The final coat is a "Flat" Clear coat aerosol paint by KRYLON

http://www.mnpctech.3dpixelnet.com/picture_library/wolfensteincasemod.casemodblog9z9z9u.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/wolfensteincasemod.casemodblog9z9z9v.jpg

G4MER
10-12-2011, 05:52 PM
Bad Ass.

Six Foot Ginger
10-13-2011, 04:46 PM
I'm liking this allot. portable is that way to go

MonsterMawd
10-16-2011, 12:43 PM
Thanks! More detailing ahead..

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9s.jpg

I'm adding lil weathering beneath rack handles

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9x.jpg

rack handles for bezel, give it more "field equipment" look

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9y.jpg

I torn-up scotch-brite pads are great for adding blotchy or speckled paint effect..

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9t.jpg

After I airbrushed over the Orange paint areas.... I also shaded over the "BF3" text...

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9v.jpg

Ok, now it's Break time, Who is open at 11pm? hmm White Castle SLIDERS! :D

We need more Billet Bullet Thumbscrews! these will be lodged in the window holes...

Painting the machined aluminum bullet thumbscrews (http://www.mnpctech.com/Bullet-Thumb-Screws.html) to look more authentic.

http://www.mnpctech.com/bullet.thumbscrew.mnpctech.com1.jpg

http://www.mnpctech.com/bullet.thumbscrew.mnpctech.com2.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9u.jpg

More to Come.......

G4MER
10-16-2011, 08:38 PM
Oh you suck.. we don't have a White Castle out here in Texas, and how I loved them while stationed at Red Stone Arsenal. And the stuff you get at Wal*Mart in the freezer section is just not the same thing.

DaemonCantor
10-16-2011, 08:43 PM
You tell em' G4mer...But I have a White Castle around the corner.....Would never go to McDonald's....BTW I love the thumb screws! best part of a job is the small thing like those...

MonsterMawd
10-22-2011, 02:05 AM
Haha, sliders! Thanks for commenting guys!

Today, I painted the Asus Sabertooth P67 "tuf shield" camo, to match interior & exterior of the Fractal-Design Arc Midi

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9z.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9z1.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9z2.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9z3.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9z4.jpg

exterior...

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9t.jpg

MonsterMawd
10-28-2011, 03:53 AM
Stealthed Blu-Ray drive face, painted and installed fan speed controller...

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9z7.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9z8.jpg

DaemonCantor
10-28-2011, 04:06 AM
Very Nice!...and looks too dam good to sit on my desk...!

MonsterMawd
10-31-2011, 11:44 AM
Thank you! For the top exhaust fan, I'm painting this 120mm "Sniper billet fan grill, http://www.mnpctech.com/MnpctechBilletFanGrill.html

http://www.mnpctech.com/0fangrill_casemod_mnpctech.com_Targeted1.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech5a.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech9z1_sniper_fan_ grill2.jpg

MonsterMawd
11-11-2011, 01:01 PM
Thanks for tuning in and commenting! While I'm still waiting for the system hardware to arrive,
I'm adding final details to the interior, like these 140mm Honeycomb Fan Grills for the exhaust and floor intake, I've painting them camouflage, to match the painted interior.

http://www.mnpctech.com/120mm_Custom_FanGrill.html

http://www.mnpctech.com/honeycomb120fangrill.mnpctech.com1.jpg (http://www.mnpctech.com/120mm_Custom_FanGrill.html)

Supplies in order of Use.
1. Red Scotch brite Pad to scuff the surface of the grills
2. Tack Cloth to clean
3. Red Primer (any color is fine)
4. Apply Rustoleum "Specialty Series" Camouflage Paints
5. Apply Matte Clear

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_140mm_fan_grill_mnpctec h1.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech5a.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_140mm_fan_grill_mnpctec h2.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_140mm_fan_grill_mnpctec h3.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_140mm_fan_grill_mnpctec h4.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_140mm_fan_grill_mnpctec h5.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_140mm_fan_grill_mnpctec h6.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_140mm_fan_grill_mnpctec h9.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_140mm_fan_grill_mnpctec h7.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_140mm_fan_grill_mnpctec h8.jpg

MonsterMawd
11-17-2011, 10:16 PM
camo fan grills :)

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_140mm_fan_grill_mnpctec h9.jpg

MonsterMawd
11-26-2011, 10:07 PM
Sorry for lack of updates guys..I'm working on 3 other custom builds for CES, and it's getting down to crunch time.. The system hardware for BF3 has finally started arriving, so I could update you! First was Intel's i-7 2600 and Prolimtech Genesis cpu cooler. I was initially concerned about space for install / uninstall of the Patriot memory modules (w/ heat spreaders), but there is plenty of space! I bumped the asus sabertooth optional 50mm fan hole for cooling the P67 chipset to 60mm...and camouflaged the fan too! Final detail was cover the Apevia "Green blade" cooling fans with 120mm billet "Sniper" fan grills (http://www.mnpctech.com/MnpctechBilletFanGrill.html)

http://www.mnpctech.com/0fangrill_casemod_mnpctech.com_Targeted1.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech_asus_sabertoot h_Genesis_Prolimatech1.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech_asus_sabertoot h_Genesis_Prolimatech3.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech_asus_sabertoot h_Genesis_Prolimatech4.jpg

xeromist
11-29-2011, 08:31 PM
Wow, that looks snazzy with the sniper grill!

MonsterMawd
11-30-2011, 08:45 PM
Awesome, glad you like it!

Camouflaged the EVGA 560ti fan shroud, to match the painted interior of the PC.

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech_asus_sabertoot h_Genesis_Prolimatech_560ti_1.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech_asus_sabertoot h_Genesis_Prolimatech_560ti_2.jpg

I chose PATRIOT MEMORY for our system memory and solid state storage!

Patriot Memory (http://patriotmemory.com/) WILDFIRE

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech_patriot_SSD_wi ldfire_120gb_1.jpg

Patriot Memory (http://patriotmemory.com/) Division 2, VIPER EXTREME, DDR3

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech_patriot_DDR3_m emory_viper1.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech_patriot_DDR3_m emory_viper2.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech_patriot_DDR3_m emory_viper3.jpg

MonsterMawd
12-12-2011, 07:16 PM
I just finished another Arc for Fractal-Design's booth at 2012 CES with 3M Di-Noc Carbon Fiber sheet (http://www.mnpctech.com/CarbonFiber_Gunmetal_Titanium.html) applied to the Asus Sabertooth P67 and Power Supply.

http://www.mnpctech.3dpixelnet.com/picture_library/fractal_design_arc_midi_dual_loop_ces_2012_mnpctec h.jpg

chrsplmr
12-12-2011, 08:11 PM
this is hard and soft at the same time....real nice work...real nice...the effort in every detail...
what a passion..each one better than the last.thnx.c.

MonsterMawd
12-16-2011, 02:03 PM
Thank you!, just a friendly fyi, if any of you planned to attend 2012 CES, in Las Vegas, January 10th - 14th, 2012... I will be there! I'll be handing out mini posters, So please drop by and Introduce yourself, I'd love to meet you, and other members from ROG Forums! I'll be sharing a booth with Fractal-Design, Located on Main Floor, South 2 - 25508. Hope to see you!

MonsterMawd
12-19-2011, 10:21 PM
Fractal-Design's Video of my recent Battlefield 3 Case Mod for Fractal-Design NA...



http://youtu.be/7jjBGAett2g

Wardope
12-29-2011, 01:17 PM
AWESOME. After seeing this i might start case mod again. havent done it for a while but now im all up for it again..
Thanks for sharing !

MonsterMawd
01-16-2012, 04:15 PM
You bet, Thank you! ThinkComputers.org dropped by my booth at CES for video of Battlefield 3 PC


http://www.youtube.com/watch?v=-ZO9H1Qs8Zs

MonsterMawd
01-17-2012, 12:28 PM
Pics of BF3 at CES!

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech_asus_sabertoot h_Genesis_Prolimatech_560ti_patriot_memory_wildfir e_CESa.jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_mnpctech_asus_sabertoot h_Genesis_Prolimatech_560ti_patriot_memory_wildfir e_CESb.jpg

MonsterMawd
01-19-2012, 04:29 PM
DazMode dropped by my booth at 2012 CES to check out the "BF3" PC for Fractal-Design. I also do overview of the "Carbon Arc" PC I built with 3M Di-Noc Carbon Fiber (http://www.mnpctech.com/CarbonFiber_Gunmetal_Titanium.html)


http://www.youtube.com/watch?v=VcEV0dE5nVI

Mack 4033
01-28-2012, 04:58 PM
A ture work of art my friend

Thanks,
Mack 4033

RoG
01-30-2012, 09:15 AM
Realy nice case, love the airbrush!!!

MonsterMawd
02-14-2012, 06:41 PM
The guys at Fractal Design are proposing a Giveaway for the "BF3 Tribute" PC I did for their CES booth. Fractal's VP of Marketing, Josh Smith posted a video making the announcement yesterday. I had a great time doing this build, and would love to see somebody here enjoying it. It would be fun to bring to your local Lan Event.

Nq30mlHYbNA

MonsterMawd
02-14-2012, 06:43 PM
The guys at Fractal Design are proposing a Giveaway for the "BF3 Tribute" PC I did for their CES booth. Fractal's VP of Marketing, Josh Smith posted a video making the announcement yesterday. I had a great time doing this build, and would love to see somebody here enjoying it. It would be fun to bring to your local Lan Event.


http://www.youtube.com/watch?v=Nq30mlHYbNA

UltraNEO*
02-14-2012, 11:43 PM
Sweet jesus!! I like...


no wait, that's a lie. I meant I adore it! :D

MonsterMawd
02-17-2012, 05:47 PM
Sweet jesus!! I like...


no wait, that's a lie. I meant I adore it! :D

Thanks for the nice comment! :o

LeandroJVarini
02-18-2012, 07:52 PM
Thank you! whats your name on fb?

the window frame is upcoming modular billet kit I'm working on..

Should be listed on Mnpctech (http://www.mnpctech.com/casemodstore.html) in few weeks

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_billet_window_mnpctech4 .jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_billet_window_mnpctech1 .jpg

http://www.mnpctech.3dpixelnet.com/picture_library/battlefield_3_bf3_case_mod_billet_window_mnpctech6 .jpg

hello Bill, will have ordering a frame this for my Raven RV03 to the original window of the same? I am preparing a work on this case and this frame would make a nice look the same!

congratulations on the very beautiful work!

famous1994
02-23-2012, 01:56 AM
Nice modding!

FR3D1
03-29-2012, 08:05 AM
that case is awesome i wish i hav one of those and by the way i love battlefield 3

frisianbear2002
03-29-2012, 08:32 AM
Wow great respect for such a fantastic looking rig :cool:

XRIGS
03-31-2012, 02:15 AM
Really can't expect less from the CaseMod Gurus. Love that themed case!

Giannis996
04-03-2012, 08:12 PM
epic build is epic!!