PDA

View Full Version : August Team ROG Challenge: Bring Out The GIMP! (990FX + Z87/Z97)



_
08-14-2014, 09:20 AM
Date: 15 Aug to 31 Aug

Challenge: Realbench 2.2 GIMP score

Result: Post a screenshot of just the GIMP run on Realbench 2.2 with your time visible, along with CPU-Z tabs of CPU/memory freq.

Accepted Chipsets: 990FX / Z97-Z87

Accepted Entries: Ambient only, 9xxx, 8xxx / i7, i5, G3258

1 point per submission up to a max of 10 points

Intel i5/i7:
10 pt: 100k
20 pt: 120k
30 pt: 130k
40 pt: 140k
65 pt: 150k
100 pt: 160k
120 pt: 165k
135 pt: 170k
150 pt: 175k

Intel G3258:
10 pt: 100k
20 pt: 120k
30 pt: 130k
40 pt: 140k
100 pt: 150k
110 pt: 160k
120 pt: 165k
135 pt: 170k
150 pt: 175k

AMD:
10 pt: 40k
20 pt: 50k
30 pt: 60k
40 pt: 70k
65 pt: 80k
100 pt: 90k
110 pt: 100k
120 pt: 110k

----------------------
Score Chart
----------------------
samual - 101pt
randyenergy - 101pt
Menthol - 101pt
jab383 - 101pt
twisted1 - 101pt + 101pt
meankeys - 136pt + 66pt + 66pt
Flexnl - 41pt + 41pt
Mike Kelly - 41pt + 41pt

_
08-14-2014, 09:20 AM
I've never run one before, but we will try this! I hope that's balanced for everyone :)

jab383
08-14-2014, 02:26 PM
Could have a better balance for Z87.

Jeff

_
08-15-2014, 01:32 AM
Could have a better balance for Z87.

Jeff

This is the GIMP score only - not overall! GIMP alone is higher :)

I've been through RB results and people are pushing those numbers on reasonable to high clocked CPUs.

meankeys
08-15-2014, 09:12 AM
Ambit cooling - So air only or is water cooling allowed?
ty

_
08-15-2014, 09:46 AM
Ambit cooling - So air only or is water cooling allowed?
ty

Basically - don't go so cold that you require lubing up your board to prevent condensation ;)

Menthol
08-15-2014, 12:04 PM
Could have a better balance for Z87.

Jeff

I don't understand what you mean by this statement, all of the intel processors can be benched on either Z87 or 97, or am I miss understanding something

twisted1
08-15-2014, 09:24 PM
Pllllss can I use 2600k, it's old and don't perform at all as well as these modern super cpus ;)

On a more seroius note, time to bring out the pentium AE!

meankeys
08-15-2014, 09:53 PM
Basically - don't go so cold that you require lubing up your board to prevent condensation ;)


Ok lol - thank you - Ill save the lube for the wife hehe :)

Menthol
08-16-2014, 12:00 AM
I just picked up one of those little Pentiums myself, will be interesting to see how it clocks

samual
08-16-2014, 12:09 AM
Gimp Score -- 160755

40085

twisted1
08-16-2014, 01:19 AM
I just picked up one of those little Pentiums myself, will be interesting to see how it clocks

They're great fun! And in the GIMP test they don't loose out to much compared to a real haswell.

Wish I could use my old beatup 2600k though ;)

twisted1
08-16-2014, 01:22 AM
Gimp Score -- 160755

40085

Nice samual! You beat my score of 158k with a 2600k @5,5Ghz(HT off) with that score.

You can disable HT, four cores seems to do the job as good.

meankeys
08-16-2014, 01:43 AM
Nice run Samual :)

randyenergy
08-16-2014, 03:39 AM
Gimp Score -- 95386

Best from my little Phenom. Could have been better but its to late.
@MarshallR:
AMD section must be subdivided, FX and non-FX. You don't expect me to compete against FXs, do you?

twisted1
08-16-2014, 03:51 AM
Gimp Score -- 95386

Best from my little Phenom. Could have been better but its to late.
AMD section should have been subdivided, FX and non-FX.

40088

You can disable 2 cores and only run 4 cores active. And the GIMP test is not to heavy on the cpu so you can usually run alot higher OC's that's not at all stable for the encoding test.

I like your temps :) :)

randyenergy
08-16-2014, 04:20 AM
You can disable 2 cores and only run 4 cores active. And the GIMP test is not to heavy on the cpu so you can usually run alot higher OC's that's not at all stable for the encoding test.
Don't make me start. Those guidelines should have been available beforehand to the rookies. I could have done it at 4.6 with the right voltages. And that's the reason my pole position at AMD Rumble #5 is not so good. To late now.

twisted1
08-16-2014, 09:29 AM
Don't make me start. Those guidelines should have been available beforehand to the rookies. I could have done it at 4.6 with the right voltages. And that's the reason my pole position at AMD Rumble #5 is not so good. To late now.

You can't know everything from the get go, that's the challenge in this sport. Learning all the tweaks and how to tune your system for every bench.

Trial and error is a lot of the time the best way to learn, and the competitions here on the forum. Don't hesitate to send me a pm if you need some tips, I know faaar from everything but I'll help out best I can :)

samual
08-17-2014, 12:10 PM
Thanks Meankeys.
I'll see if i can push a higher score.

Dartmaul
08-17-2014, 12:17 PM
Isn't Gimp a single thread test, so why different points per score for i5/7 and pentium?

PS sniff sniff I don't have any haswell rig(

twisted1
08-17-2014, 03:10 PM
Isn't Gimp a single thread test, so why different points per score for i5/7 and pentium?

PS sniff sniff I don't have any haswell rig(

I think you need 4 cores, you can test it your self. Just disable some cores :)

Menthol
08-17-2014, 03:51 PM
40107

twisted1
08-17-2014, 04:03 PM
Nice Menthol!! I shall give it a shot with my Pentium AE later today. To bad I can't use the 2600k ;)

jab383
08-17-2014, 04:43 PM
I don't understand what you mean by this statement, all of the intel processors can be benched on either Z87 or 97, or am I miss understanding something

Just trying to gripe with some humor. Z87 wasn't listed at all as an acceptable chip set in the original post.

Jeff

meankeys
08-17-2014, 04:46 PM
Nice run Menthol - I would love to know some of your secrets on your memory settings you always seem to be running that stuff @ light speed :)

Menthol
08-17-2014, 05:47 PM
twisted, my Pentium doesn't seem to be a good clocker, 4.6 to 4.8 and it stops
meankeys, my memory secret is Raja's ROG memory presets and a good set of Corsair Platinum 2666 cl10 that you can't find anymore, Arne has searched the Globe, I am keeping my kit for sure. other than that I am the worst with memory timings, Paw, Dart, Lumni, ask them about timings, I know squat

twisted1
08-17-2014, 05:56 PM
Gimp Score -- 150354

40108

Perhaps you don't need more then 2 cores on a 4790K, the bigger cache will make it a bit faster per clock. This was w/o even running diagnostics mode.

twisted1
08-17-2014, 05:59 PM
twisted, my Pentium doesn't seem to be a good clocker, 4.6 to 4.8 and it stops
meankeys, my memory secret is Raja's ROG memory presets and a good set of Corsair Platinum 2666 cl10 that you can't find anymore, Arne has searched the Globe, I am keeping my kit for sure. other than that I am the worst with memory timings, Paw, Dart, Lumni, ask them about timings, I know squat

I must have gotten a pretty good one. Key for me to get it stable is to set VCCIN to Vcore +0.4V. So at 1,4Vcore VCCIN=1,8V. With those settings I could get the Vcore much lower compared to using auto for VCCIN. On Devil Canyon cpu's however they claim that VCCIN should be kept low, don't have a DC cpu yet though so I haven't tested it myself.

meankeys
08-17-2014, 06:57 PM
Aside from my clock speed the normally RB tweaks helpped in getting a few more points that bumped me over the 170000 mark. Run # 2 seem to produce a better score than run # 1.

40109

My first run was @ 5200 MHz - 167630 - no tweaks
Second run @ 5300 MHz - 168040 - no tweaks
Third run @ 5400 MHz - 170170 - tweaks
Fourth run @ 5452 MHz - 171823 - tweaks - Second run score

HT did make a difference to me in adding to the points :)

**THIS SUBMISSION IS WITH SS COOLING AND DOSE NOT COUNT AS MARSHALL REQUESTED AMBIT COOLING**

twisted1
08-17-2014, 07:15 PM
Very nice Meankeys!!

jab383
08-17-2014, 07:15 PM
No HT here - it's a Pentium. Still working on getting it up to its potential.

40110

Jeff

randyenergy
08-17-2014, 07:37 PM
You can't know everything from the get go, that's the challenge in this sport. Learning all the tweaks and how to tune your system for every bench.

Trial and error is a lot of the time the best way to learn, and the competitions here on the forum. Don't hesitate to send me a pm if you need some tips, I know faaar from everything but I'll help out best I can :)


No HT here - it's a Pentium. Still working on getting it up to its potential.

40110

Jeff
Nice on. Also getting one of those babies.
CPU-Z 1.70 ROG has been released. http://www.cpuid.com/downloads/cpu-z/1.70-rog-setup-en.exe

twisted1
08-17-2014, 07:42 PM
Gimp Score -- 153557

40111

randyenergy
08-17-2014, 07:49 PM
twisted, my Pentium doesn't seem to be a good clocker, 4.6 to 4.8 and it stops
meankeys, my memory secret is Raja's ROG memory presets and a good set of Corsair Platinum 2666 cl10 that you can't find anymore, Arne has searched the Globe, I am keeping my kit for sure. other than that I am the worst with memory timings, Paw, Dart, Lumni, ask them about timings, I know squat
PM sent.

samual
08-17-2014, 08:03 PM
Hot numbers Meankeys.

meankeys
08-17-2014, 08:07 PM
Gotcha THX :)

Thanks guy's I finally got a jem of a chip :)

@Randy thanks for the linkage



twisted, my Pentium doesn't seem to be a good clocker, 4.6 to 4.8 and it stops
meankeys, my memory secret is Raja's ROG memory presets and a good set of Corsair Platinum 2666 cl10 that you can't find anymore, Arne has searched the Globe, I am keeping my kit for sure. other than that I am the worst with memory timings, Paw, Dart, Lumni, ask them about timings, I know squat

twisted1
08-17-2014, 08:25 PM
Gimp Score -- 154363

40112

Finally got the timings sorted on the PSC mem :)

twisted1
08-17-2014, 08:27 PM
twisted, my Pentium doesn't seem to be a good clocker, 4.6 to 4.8 and it stops
meankeys, my memory secret is Raja's ROG memory presets and a good set of Corsair Platinum 2666 cl10 that you can't find anymore, Arne has searched the Globe, I am keeping my kit for sure. other than that I am the worst with memory timings, Paw, Dart, Lumni, ask them about timings, I know squat

Here are some timings for Platinum 2666CL10, he's running them @CL8

http://kingpincooling.com/forum/showpost.php?p=27623&postcount=32

randyenergy
08-17-2014, 08:30 PM
All those scores. Why do you guys make feel so bad? Hey its a Phenom!! :p

meankeys
08-17-2014, 08:39 PM
Thanks Pete

@Randy most of us were AMD guy's back in the day but once Intel's multi core cpu's came out we never looked back. hint hint lol

randyenergy
08-17-2014, 09:16 PM
twisted, my Pentium doesn't seem to be a good clocker, 4.6 to 4.8 and it stops
meankeys, my memory secret is Raja's ROG memory presets and a good set of Corsair Platinum 2666 cl10 that you can't find anymore, Arne has searched the Globe, I am keeping my kit for sure. other than that I am the worst with memory timings, Paw, Dart, Lumni, ask them about timings, I know squat


Here are some timings for Platinum 2666CL10, he's running them @CL8

http://kingpincooling.com/forum/showpost.php?p=27623&postcount=32

Is this the part number? CMD16GX3M4A2666C10
Any other part number just to make sure?
Because i found them in 16GB (4X4)
Let me know

chrsplmr
08-17-2014, 09:29 PM
Randy .. don't feel bad .. there are benchmarks that they can't beat the phenom in .. they cried. lol
It's all about 'the learning' to be able to get the best out of our own equipment ..
They all game, 'compute', run apps ..
Some intel guys have big bucks invested to do it .. to each their own.
I look at it this way .. other than on the track (benching) a 220mph Ferrari is still on the
same 55mph highway that my Metro (AMD) is ..
Please don't take them wrong, they are a great bunch and would be some of the first to help
you get anywhere you want to go ..
I'd love to get on the track .. when all my kids grow up and move out .. hahhaaa .. maybe.
MeanKeys was even my intel partner in an AMD/intel partnered Challenge ... we did pretty good too ..
I was using an 1100 .... Just have fun brother .. .c.

btw .. The same is true of the FX flavored AMD .. most are not as good as your 1100 in some things.
And I might add .. in the end I couldn't get her to OC past 4.2 without puk'n .. 4.0 rock stable all day.

twisted1
08-17-2014, 09:30 PM
Thanks Pete

@Randy most of us were AMD guy's back in the day but once Intel's multi core cpu's came out we never looked back. hit hit lol

I'm a huge AMD fan, nothing would make me happier than AMD competing with intel. That would speed up development and we would not see these half-ass TIM's like intel has used on Ivy/Haswell.

I wan't high performance though, and AMD is not really an option atm.

chrsplmr
08-17-2014, 09:34 PM
I'm a huge AMD fan, nothing would make me happier than AMD competing with intel. That would speed up development and we would not see these half-ass TIM's like intel has used on Ivy/Haswell.


Exactly said. +added. .c.

randyenergy
08-17-2014, 09:57 PM
Randy .. don't feel bad .. there are benchmarks that they can't beat the phenom in .. they cried. lol
It's all about 'the learning' to be able to get the best out of our own equipment ..
They all game, 'compute', run apps ..
Some intel guys have big bucks invested to do it .. to each their own.
I look at it this way .. other than on the track (benching) a 220mph Ferrari is still on the
same 55mph highway that my Metro (AMD) is ..
Please don't take them wrong, they are a great bunch and would be some of the first to help
you get anywhere you want to go ..
I'd love to get on the track .. when all my kids grow up and move out .. hahhaaa .. maybe.
MeanKeys was even my intel partner in an AMD/intel partnered Challenge ... we did pretty good too ..
I was using an 1100 .... Just have fun brother .. .c.

btw .. The same is true of the FX flavored AMD .. most are not as good as your 1100 in some things.
And I might add .. in the end I couldn't get her to OC past 4.2 without puk'n .. 4.0 rock stable all day.
Yeah know that. kicked a lot of FXs in RB V2 and some at HWBOT.
At HWBOT Rumble AMD #5 nobody can beat my Cinebench 11.5 and that score was achieved completely in the dark. Unfortunately my V6 roadster is parked in my museum hall.



I'm a huge AMD fan, nothing would make me happier than AMD competing with intel. That would speed up development and we would not see these half-ass TIM's like intel has used on Ivy/Haswell.

I wan't high performance though, and AMD is not really an option atm.
Totally. Competition would have created some hot rods.
I've been reading Intel stuff and it is not really that great. Because there is no competition Intel sandbags us with not so "hot" stuff. Expected better out of the box GHz. Could have been better.

Need answers to my post #41

chrsplmr
08-18-2014, 01:58 AM
Need answers to my post #41-- BELOW.
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
Post #41:
Is this the part number? CMD16GX3M4A2666C10
Any other part number just to make sure?
Because i found them in 16GB (4X4)
Let me know
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
See above Post #41: My apologies goodSir. .c.

_
08-18-2014, 08:13 AM
Just trying to gripe with some humor. Z87 wasn't listed at all as an acceptable chip set in the original post.

Jeff

Update 1 - I've added Z87 now :) I forgot to put it in the title but it was in the post

Update 2 - I've added 165k/125pts for Intel i5/i7

Update 3 - I've added extra 110/120k scores for AMD. Really not sure how high AMD can hit!

Update 4 - Seems I completely underestimated the performance G3258 would do.. oops! I will normalize the scores with other Intel chips to be fair. Very sorry for late change but I have no basis for reference.

GIMP is a single threaded/memory efficiency test with some SSD/system read/write/IO performance focus. If you run two cores (so OS background tasks don't interfere) and the fastest/tightest memory timings you can do, you'll get best score.

Update 5 - Added 170 and 175k thanks to Meankeys blowing away my score chart expectations :O

meankeys
08-18-2014, 08:20 AM
Thx for the update and tip.

This is a fun bench for sure.

_
08-18-2014, 08:23 AM
Score chart in post 1 updated.

Menthol
08-18-2014, 01:30 PM
I must have gotten a pretty good one. Key for me to get it stable is to set VCCIN to Vcore +0.4V. So at 1,4Vcore VCCIN=1,8V. With those settings I could get the Vcore much lower compared to using auto for VCCIN. On Devil Canyon cpu's however they claim that VCCIN should be kept low, don't have a DC cpu yet though so I haven't tested it myself.

twisted1, thanks for the info, I seemed to have forgotten that from overclocking my 4770k, I read the same thing on DC and will give that a shot on my sample, and probably re try my baby Pentium again

Menthol
08-18-2014, 01:34 PM
No HT here - it's a Pentium. Still working on getting it up to its potential.

40110

Jeff

Jeff,
Way to go nice 2 core score

twisted1
08-19-2014, 09:55 AM
Thanks Pete

@Randy most of us were AMD guy's back in the day but once Intel's multi core cpu's came out we never looked back. hit hit lol

Meankeys, what do you get out of your 4790k @5Ghz cache @x48? Would be interesting to compare to the pentium's 154k score at those clocks.

twisted1
08-19-2014, 11:33 AM
Update 1 - I've added Z87 now :) I forgot to put it in the title but it was in the post

Update 2 - I've added 165k/125pts for Intel i5/i7

Update 3 - I've added extra 110/120k scores for AMD. Really not sure how high AMD can hit!

Update 4 - Seems I completely underestimated the performance G3258 would do.. oops! I will normalize the scores with other Intel chips to be fair. Very sorry for late change but I have no basis for reference.

GIMP is a single threaded/memory efficiency test with some SSD/system read/write/IO performance focus. If you run two cores (so OS background tasks don't interfere) and the fastest/tightest memory timings you can do, you'll get best score.

Update 5 - Added 170 and 175k thanks to Meankeys blowing away my score chart expectations :O

RB shows the cpu as a Pentium G3420 btw, I suspect it's got to CPU-Z to do. CPU-Z did the same thing in versions prior to V 1.70.00.

flexnl
08-19-2014, 11:11 PM
hi guys :) good to see everybody is still hooked on benching :D \o/

i m gonna give it a try to! with my 3258 :D

here s my first run..

40158

meankeys
08-20-2014, 02:11 AM
Hi Flex... What up bro

@ Pete - 5MHz - cache@48 - I defiantly seem to sore better with HT enabled and all cores? On two cores no tweaks I ran a 147863

No tweaks

40162

With tweaks

40163

_
08-20-2014, 03:46 AM
RB shows the cpu as a Pentium G3420 btw, I suspect it's got to CPU-Z to do. CPU-Z did the same thing in versions prior to V 1.70.00.

Yes 1.7 fixes issues with FM2+ CPUs too. Once Noden's is back and 1.7 ROG is out, we'll update :)

randyenergy
08-20-2014, 07:06 AM
Yes 1.7 fixes issues with FM2+ CPUs too. Once Noden's is back and 1.7 ROG is out, we'll update :)
CPU-Z 1.7 ROG is out quite a while.
Gong back to my previous posts, mention/suggestion was made about subdividing the AMD section as you have done for the Intel. Cannot compete with FXs.
And it would be nice to have some goodies as prices for these competitions amongst members. No game codes or stickers please. This is an OC section. Some small goodies like ROG USBs/T-shirts/Caps and the like would be so nice.

twisted1
08-20-2014, 10:57 AM
Hi Flex... What up bro

@ Pete - 5MHz - cache@48 - I defiantly seem to sore better with HT enabled and all cores? On two cores no tweaks I ran a 147863

No tweaks

40162

With tweaks

40163

I thought the difference would be bigger, it's pretty much the same scores as the pentium. I used win7 and PSC @2600 CL8 though.

For aquamark/03/05 the pentium is useless. Must be because of the smaller cache.

flexnl
08-20-2014, 04:25 PM
twisted great results with the pentium man :) im way behind ya :D
do you use adaptive voltage settings?
and howmuch ringbus voltage for that 4,8 :)
and wile your at it....howmuch input voltage ?
c-states on?
:cool:

have been benching this afternoon and its a struggle haha


got some gain.... 148489

40182

twisted1
08-20-2014, 04:45 PM
twisted great results with the pentium man :) im way behind ya :D
do you use adaptive voltage settings?
and howmuch ringbus voltage for that 4,8 :)
and wile your at it....howmuch input voltage ?
c-states on?
:cool:

have been benching this afternoon and its a struggle haha


got some gain.... 148489

40182

I think I got pretty lucky with my chip looking at the rankings over att hwbot most people running higher OC is on SS or LN2. I only use static voltage, 1.44V for cache x48. I always set input voltage like Vcore +0.4V, so for 1,4Vcore VCCIN=1.8V. And I set analog and digital to +0.2V offset.

Speedstep, C-states and so on disabled, Cache line prefetcher enabled though.

For daily use I run 4.9G 1.42Vcore, 1.82VCCIN. And I set analog and digital to +0.2V offset.

These CPU's really perform well in the GIMP test, I'm impressed. Not impressed with performance in benchmarks like aqua/03/05 though.

Mike Kelly
08-20-2014, 10:50 PM
Im sorry that Im such a newb that I dont know what a GIMP is......

I already had Realbench on my pc, so I ran all the tests and
did a screen capture when it ended.

I am water cooling, so I dont know if this counts
but my temps did get up to a high level.

thanks for any info on what is the right way
to do this if I screwed up.

Mike



40202

Menthol
08-20-2014, 11:04 PM
Mike,
Gimp is the very first test only, the second and last tests are the hardest on the CPU and probably where you would see the highest temps.
The fact you are running ROG hardware qualifies you as not a newb. There is a thread on tweaks for realbench if you so desire to increase your scores

Mike Kelly
08-20-2014, 11:16 PM
40208

I had left out the Memory or Graphics
so I just did another test and
reported the two other
requirements.

The tips and tricks area
has lots of really great
things that I look forward
to downloading and reading !!!

Thanks !!!

meankeys
08-21-2014, 12:26 AM
Mike your only a newb if you don't ask questions :)

The only dumb question is the one not answered and trust me when I say I've asked my share of dumb questions :)

Have fun

flexnl
08-22-2014, 03:08 AM
€‹
I think I got pretty lucky with my chip looking at the rankings over att hwbot most people running higher OC is on SS or LN2. I only use static voltage, 1.44V for cache x48. I always set input voltage like Vcore +0.4V, so for 1,4Vcore VCCIN=1.8V. And I set analog and digital to +0.2V offset.

Speedstep, C-states and so on disabled, Cache line prefetcher enabled though.

For daily use I run 4.9G 1.42Vcore, 1.82VCCIN. And I set analog and digital to +0.2V offset.

These CPU's really perform well in the GIMP test, I'm impressed. Not impressed with performance in benchmarks like aqua/03/05 though.


tnx 4 info m8 :)

i managed to sqeeze a couple of mhz more out of it :D:D with truckload of voltage (not overheating)

149131

40273

_
08-22-2014, 06:12 AM
First post points updated :D

Mike Kelly
08-22-2014, 06:23 AM
CyberPower CP1500AVRLCD will be here on Monday, as with all of the Benchmarking I've been doing, my old 500W
unit cant handle the pump and new fans from the new water cooling system. I never thought this would happen but
I cant have my whole system shutting down when Im in the middle of a Bench Test. Oh well, live and learn.

40279

***************************************** EDIT *********************************************

Well my UPS came via UPS and it works great. No more shutting down. I can see why the old
one had such a hard time. The old 500 Watts just could not put out over the 600 watts I need
to run my new water cooled rig.

This photo says 585 watts, but it did go up past 600 for a second or two one time. I may have
had the fans going up as I was running the game that use to shut the pc off.

40353

Mike Kelly
08-23-2014, 04:19 AM
Im having a problem uploading my results to realbench. I type in my email and password and nothing happens. All I can do is take a screenshot
but I did save my results.rbr but its as a text file ???

Im not sure what to do ???


40301


well it would not let me upload the txt file. I deleted it.

Im lost...

samual
08-23-2014, 04:24 AM
score 126366

40302

Henkenator68NL
08-23-2014, 05:14 AM
Gimp(eace):
Score: 159711
System: Z97 vii Gene, Intel 4790K, G.Skill TridentX, Matrix Platinum R9 290X, Custom Water Cooled Loop

40303

meankeys
08-23-2014, 11:51 AM
Im having a problem uploading my results to realbench. I type in my email and password and nothing happens. All I can do is take a screenshot
but I did save my results.rbr but its as a text file ???

Im not sure what to do ???


40301


well it would not let me upload the txt file. I deleted it.

Im lost...

Mike
This bench is just for the gimp part of the realbench test. (the first test) you can not upload results unless you run all 4 of the test. if you run all four of the test you will be able to upload your results. If you have any trouble just post it and we will walk you through it.

Mike Kelly
08-23-2014, 06:13 PM
Mike
This bench is just for the gimp part of the realbeanch test. (the first test) you can not upload results unless you run all 4 of the test. if you run all four of the test you will be able to upload your results. If you have any trouble just post it and we will walk you through it.

AHHHH, the answer is appreciated ! Now I know !!! Thank You !!!

Mike Kelly
08-23-2014, 08:30 PM
I unparked my cores..... but lowered my oc and volts.



40311



What I really like is that I have my temps under control.
If I can run a test that does 99% usage of my CPU
and stay under 70, then playing a game like BF4
should never strain my system and put any
undo heat that can cause longevity issues.

meankeys
08-23-2014, 09:09 PM
Not bad... nice run

samual
08-24-2014, 12:41 AM
score 140953

40316

Luumi
08-25-2014, 05:44 AM
When are we going to do some 5ghz superpi again :P? Don't look at the motherboard tab ^^.
40337

meankeys
08-25-2014, 08:23 AM
Nice score Luumi

jab383
08-25-2014, 10:50 PM
Tuning this Pentium for maximum smoke gets 153931

40350

Jeff

meankeys
08-26-2014, 01:39 AM
Nice score Jab383

Has anyone tried all 4 cores? and if so how do you score. I have made several runs I almost always score a bit better on all cores. 4790K

jab383
08-31-2014, 11:30 PM
Here I come at the last minute, gasping and out of breath. At least I made it while it's still 31 Aug here if not there. This run is on a 4770K with all 4 cores at the same clock. I agree with meankeys. The benchmark seems to run better when there are more threads available to catch all the OS processing that goes on in the background. AaaaaH! The forum is stuffed. There's no icon for uploading an image. I have one. I really do. The Gimp score is 158868 at 4972.4MHz. I'll edit to upload when I can. Jeff

jab383
09-01-2014, 06:27 PM
40610


Quick Reply isn't what it used to be.

Jeff

twisted1
09-01-2014, 09:23 PM
score 126366

40302

I think you should get better scores then what you're getting. Make sure that cache prefetcher and the other prefetch thing in bios is eenabled. And the regular tweaks, no EIST, no C-states and so on :)

Rockford
02-11-2015, 09:31 AM
I have 48 sec +175k using a 4690K in RB Gimp (image editing)

But different mobo brand, and another team.....

So i dont think it will count......

Rockford
03-01-2015, 08:01 PM
well, lost the 48 sec among all the screenshots 5620mhz

But i found the next best that day 49.14 sec

47029