View Full Version : G750js Memory module configuration questions

Mike Barnhill
02-21-2015, 03:34 PM
I just got my g750js and so far I like it a lot. When I ordered it I assumed it would have 2x4 and 2x2 memory modules. It seems to actually have 3x4 memory modules. My question, is the lone 4 by itself in the easy bank to get to or the hard one to get to? Can I just pull the bottom cover off, pull one four out and put 2 8's in and get 24? Also since we are talking about two different banks does it matter if they are not the same brand as long as they are 1.35v?

02-24-2015, 01:25 PM
The bottom cover has a tag with a screw under it, unscrew first then the cover will lift off, it does have little tabs around the edge so it needs care removing it. There are 2 slots of memory banks near the middle, easy to locate. You can pull out the 4Gb memory and replace with a 2 * 8Gb memory kit.

Ideally make sure the new memory kit is exactly the same brand and spec. as the memory you remove, to help with this use CPUID CPU-Z and select SPD to check the memory details of your existing memory.(more details here: http://www.popularmemory.org/mixing-brands-of-ddr-memory/).

All memory must be 1.35v, some memory is advertised/specified as 1.35v/1.5v which can result in it running at 1.5v on a G750, ensure the memory is nailed/fixed at 1.35v.

Ensure you remove static electricity from yourself prior to removing memory and installing new memory (more details here: http://www.wikihow.com/Remove-Static-Electricity).

Let us know if you have any further queries and how you get on.