PDA

View Full Version : Need help!!!!!!!!!



s3agull
07-18-2015, 01:58 AM
here are my set up,
1 x CORSAIR Hydro Series H50 120mm Quiet Edition Liquid CPU Cooler
1 x EVGA 220-G2-0750-XR 80 PLUS GOLD 750
2 x MSI GTX 980 GAMING 4G GeForce GTX 980 4GB 256-Bit GDDR5
1 x Intel Core i7-4790K
1 x Seagate Barracuda ST1000DM003 1TB 7200 RPM
1 x GIGABYTE GA-Z97X-UD3H-BK
2 x Mushkin Enhanced Stealth 8GB
1 x Microsoft Windows 8.1 - Full Version (32 & 64-bit)
1 x Mushkin Enhanced ECO2 MKNSSDEC240GB 2.5" 240GB SATA III MLC Internal Solid State Drive (SSD)
1 x asus ROG swift

i tried to find solution everywhere but failed. I just build up a MSI gtx980 sli pc. also i bought a rog swift. when i just installed windows, the monitor works just fine (which proved theres no problem neither in Graphic cards, cable, nor monitor, i guess?) , but after the driver updates for the nvidia. the monitor only works on the startup boot menu and the windows logo, after that, BOOOM black! i tried almost every method, replug psu, replug dp, reboot. etc

Arne Saknussemm
07-18-2015, 06:22 AM
Uff...annoying....fastest thing would probably be to clean install OS and take care with updates...

You could remove sli bridge or even one of the cards...and try to get a signal from one card first...

Volt
07-20-2015, 08:44 PM
Uff...annoying....fastest thing would probably be to clean install OS and take care with updates...

You could remove sli bridge or even one of the cards...and try to get a signal from one card first...

I've not used a Swift in SLI. Like the above poster suggested - I'd try getting to work first without the SLI set up. Either remove the bridge, or remove one of the cards, to get that working first.

Also try searching this forum to see if there are other people who have posted issues with a SLI setup. I've been on this board since November. I don't recall a post off the top of my head. But there may be one.