PDA

View Full Version : g751jy's ssd trim ( cache clean )



NemoReborn
02-20-2016, 07:48 AM
i used to have a intel ssd on my desktop .. they have a software u can run to clean the sdd's cache

there is any software available to my 256g samsung ssd ???

brkkab123
02-20-2016, 09:57 AM
Go to Samsung's website and download Samsung Magician. Install it and click on Performance Optimization and run it.
P.S. I have a Samsung ssd and a Intel ssd. Samsung Magician kicks Intel's SSD Toolboxes ass.
Enable Rapid Mode and your ssd will speedup big time. Intel SSD Toolbox doesn't have that or a benchmark utility in it, like Samsung Magician does.

NemoReborn
02-20-2016, 10:53 AM
thanks alot !!! :)

NemoReborn
02-20-2016, 11:03 AM
i just installed the software .. everything in the left column is gray out except the speed benchmark , i cant select the optimisation or anything else .. any clue ?

cdma2k
02-20-2016, 01:25 PM
in windows comman prompt type: fsutil behavior set DisableDeleteNotify 0

JustinThyme
02-20-2016, 04:09 PM
in windows comman prompt type: fsutil behavior set DisableDeleteNotify 0

Forget Samsung magician, it wont work on OEM Samsung drives no matter what you do, even says so on Samsung's website. The only thing you can do with magician that you cant do otherwise is update firmware on supported Samsung drives.

Partially correct. but this command prompt does nothing but report if you have its enabled or disabled. The way you would run it is seach cmd in search window right click run as admin then right click copy on this command without quotes "fsutil behavior query DisableDeleteNotify" then paste it into the command prompt with ctrl V and press enter. If it returns DisableDeleteNotify = 0 then TRIM is enabled.

Now you want the easier way and the console where you control the native TRIM in Windows 8.1 and later?
in the search bar type in defrag, you will see defragement and optimize drives. click on it to open then you should note that your SSD shows like in the screen shots below. You should see SSD for your SSD and the optimize command=TRIM. You can highlight and run it at will or set it up to rund daily, weekly or monthly. Default is weekly. BAM done!

55779


55780

NemoReborn
02-21-2016, 11:29 AM
wow well done guys !!! thanks alot for this info !!! work perfectly !! appreciated