PDA

View Full Version : AI Suite doesn't recognize CH FAN 1 on RAMPAGE V ED10



iujona
07-07-2016, 04:34 PM
I have fans connected to chassis fan 1 (bottom of the mobo). Fans work but AISUITE doesn't recognize them, even though they show up in the BIOS. BIOS settings for fans are set to AUTO. They are 3 pin fans.

Brighttail
07-14-2016, 12:43 AM
In the BIOS try setting that channel to anything BUT PWM. Try Auto or DC. If you have it set to PWM with a 3 pin fan it can cause problems with the software.

Beyond that, you might have a fan that windows software doesn't like. I had an old ANTEC like this. So I used the BIOS to set it like i wanted and worked fine.

Brighttail
07-14-2016, 02:21 AM
In the BIOS try setting that channel to anything BUT PWM. Try Auto or DC. If you have it set to PWM with a 3 pin fan it can cause problems with the software.

Beyond that, you might have a fan that windows software doesn't like. I had an old ANTEC like this. So I used the BIOS to set it like i wanted and worked fine.