PDA

View Full Version : Help me sort this out on the RAM / ASUS ROG G752VS-XS74K OC Edition



bigoldbrat
03-19-2017, 11:49 PM
So these are the specs:
NVIDIA GTX 1070 8GB Graphics Card, Unlocked 7th-Gen Intel Core i7-7820HK Processor, Windows 10 Pro OS
Ok so far
512GB NVMe PCIe SSD (256x2 RAID0) + 1TB 7200RPM HDD
Yes
17.3" FHD 120Hz Refresh Rate 1920x1080 G-SYNC Display with Wide view
Absolutely
Overclocked 16GB DDR4 2800MHz RAM
I'm not sure, a little confused here.
RaMMon says Apacer Technology PC4-22400. (2015) From what I can find this would be 2800.
But when I run CPU-Z it says it runs around 1197mhz (+- 2400)
Of course the bios on this unit just has basics, no way to see the guts of it.
Lastly, any recommendations to add one 16gb stick to this beast would be appreciated.


Item | Module #1 |
--------------------------------------------------------------------------------------|----------------------------------------|-
Ram Type | DDR4 |
Maximum Clock Speed (MHz) | 1401 (XMP) |
Maximum Transfer Speed (MHz) | DDR4-2801 |
Maximum Bandwidth (MB/s) | PC4-22400 |
Memory Capacity (MB) | 16384 |
Jedec Manufacture Name | Apacer Technology |
Search Amazon.com | Search! |
SPD Revision | 1.0 |
Registered | No |
ECC | No |
DIMM Slot # | 1 |
Manufactured | Week 49 of Year 2015 |
Module Part # | 76.D305G.D060B |
Module Revision | 0x0 |
Module Serial # | 0x5515492 |
Module Manufacturing Location | 16 |
# of Row Addressing Bits | 16 |
# of Column Addressing Bits | 10 |
# of Banks | 16 |
# of Ranks | 2 |
Device Width in Bits | 8 |
Bus Width in Bits | 64 |
Module Voltage | 1.2V |
CAS Latencies Supported | 10 11 12 13 14 15 16 17 18 |
Timings @ Max Frequency (JEDEC) | 17-17-17-39 |
Maximum frequency (MHz) | 1200 |
Maximum Transfer Speed (MHz) | DDR4-2400 |
Maximum Bandwidth (MB/s) | PC4-19200 |
Minimum Clock Cycle Time, tCK (ns) | 0.833 |
Minimum CAS Latency Time, tAA (ns) | 13.750 |
Minimum RAS to CAS Delay, tRCD (ns) | 13.750 |
Minimum Row Precharge Time, tRP (ns) | 13.750 |
Minimum Active to Precharge Time, tRAS (ns) | 32.000 |
Minimum Row Active to Row Active Delay, tRRD (ns) | 3.300 |
Minimum Auto-Refresh to Active/Auto-Refresh Time, tRC (ns) | 45.750 |
Minimum Auto-Refresh to Active/Auto-Refresh Command Period, tRFC (ns) | 350.000 |
| |
DDR4 Specific SPD Attributes | |
Maximum Clock Cycle Time, tCKmax (ns) | 1.600 |
Minimum Auto-Refresh to Active/Auto-Refresh Command Period, tRFC2 (ns) | 260.000 |
Minimum Auto-Refresh to Active/Auto-Refresh Command Period, tRFC4 (ns) | 160.000 |
Minimum Activate to Activate Delay Time different bank group, tRRD_Smin (ns) | 3.300 |
Minimum Activate to Activate Delay Time same bank group, tRRD_Lmin (ns) | 4.900 |
Minimum CAS to CAS Delay Time same bank group, tCCD_Lmin (ns) | 5.000 |
Minimum Four Activate Window Delay (ns) | 21.000 |
Maximum Activate Window in units of tREFI | 8192 |
Thermal Sensor Present | No |
DRAM Stepping | 0 |
DRAM Manufacture | Samsung |
SDRAM Package Type | Monolithic, 1 die, Single load stack |
Maxium Activate Count (MAC) | Unlimited MAC |
Post Package Repair Supported | No |
Module Type | SO-DIMM |
Module Height (mm) | 30 |
Module Thickness (front), (mm) | 2 |
Module Thickness (back), (mm) | 2 |
Reference Raw Card Used | Raw Card E Rev. 15 |
| |
XMP Attributes | |
XMP Revision | 2.0 |
Enthusiast / Certified Profile | |
Module voltage | 1.20V |
Clock speed (MHz) | 1401 |
Transfer Speed (MHz) | DDR4-2801 |
Bandwidth (MB/s) | PC4-22400 |
Minimum clock cycle time, tCK (ns) | 0.714 |
Supported CAS latencies | 18 |
Minimum CAS latency time, tAA (ns) | 12.513 |
Minimum RAS to CAS delay time, tRCD (ns) | 12.513 |
Minimum row precharge time, tRP (ns) | 12.513 |
Minimum active to precharge time, tRAS (ns) | 26.875 |
Supported timing at highest clock speed | 18-18-18-38 |
Minimum Active to Auto-Refresh Delay, tRC (ns) | 37.842 |
Minimum Auto-Refresh to Active/Auto-Refresh Command Period, tRFC1 (ns) | 350.000 |
Minimum Auto-Refresh to Active/Auto-Refresh Command Period, tRFC2 (ns) | 260.000 |
Minimum Auto-Refresh to Active/Auto-Refresh Command Period, tRFC4 (ns) | 160.000 |
Minimum Four Activate Window Delay, tFAW (ns) | 22.500 |
Minimum Activate to Activate Delay Time different bank group, tRRD_S (ns) | 4.284 |
Minimum Activate to Activate Delay Time same bank group, tRRD_L (ns) | 4.998 |

Clintlgm
03-20-2017, 12:21 AM
Most likely you have 2 8GB stick in there that you can't get too with out dissembling the notebook. So you should match what you have with 2 sticks 8GB or 16 GB, for 16 or 24 GB total. you should try to match them to the ones you have. Base timings, voltages minimum. hwinfo64 (https://www.hwinfo.com/download.php) will give you the exact data on the 2 sticks you have. There DDR in dual channel mode so double what ever they are reading. I can't be more helpful since I don't have an OC model

bigoldbrat
03-20-2017, 01:21 AM
Clintlgm,
Everything I've ran shows only one slot occupied with one 16g stick... But thanks for the heads up

Clintlgm
03-20-2017, 03:51 PM
Clintlgm,
Everything I've ran shows only one slot occupied with one 16g stick... But thanks for the heads up

that would really suck!! and also it would be very unusual for Asus to put only 1 stick in the area that you don't have access too. Still you could add the two sticks to the slots available to you and they would run Dual Channel.

I suspect that you do have 2 8GB if you didn't you would only be getting the speed of 1 stick half the speed of 2 Stick in Dual Channel mode. In Hwinfo64 it will only show your RAM 1 stick at a time but will show that you have 2 stick or one stick
63350

STM Consultancy
08-26-2018, 06:31 PM
The Apacer run at 1200 indeed, but should have 1400 (so current RAMs to install should be 2800MHz indeed ... while my HWiNFO says they are programmed at only 1300 ... ASUS ... may you know why?

Anyway, took a while I can afford this special model hehe ... almost happy with it, but definitely design of the Asus G752 doesn't allow for fitting big harddisks so no choice, I am targeting the latest 4TB SSDs coming out now ... and upgrade to 32GB with the Apacer modules, so should be future proof a while.



Computer: ASUS G752VSK
CPU: Intel Core i7-7820HK (Kaby Lake-H, B0)
2900 MHz (29.00x100.0) @ 3589 MHz (36.00x99.7)
Motherboard: ASUS G752VSK
BIOS: G752VSK.302, 04/27/2017
Chipset: Intel CM238 (Skylake PCH-H)
Memory: 16384 MBytes @ 1196 MHz, 17-17-17-39
- 16384 MB PC22400 DDR4 SDRAM - Apacer Technology 76.D305G.D060B
Graphics: NVIDIA GeForce GTX 1070 (GP104M) [ASUS]
NVIDIA GeForce GTX 1070, 8192 MB GDDR5 SDRAM
Drive: HGST HTS721010A9E630, 976.8 GB, Serial ATA 6Gb/s @ 6Gb/s
Drive: SAMSUNG MZVPW256HEGL-00000, 250.1 GB, NVMe
Drive: SAMSUNG MZVPW256HEGL-00000, 250.1 GB, NVMe
Drive: HL-DT-ST DVDRAM GUE1N, DVD+R DL
Sound: Intel Skylake PCH-H - High Definition Audio Controller
Network: Intel Dual Band Wireless-AC 8260 AC 2x2 HMC WiFi Adapter
Network: RealTek Semiconductor RTL8168/8111 PCI-E Gigabit Ethernet NIC
OS: Microsoft Windows 10 Professional (x64) Build 17134.228 (1803/RS4)

jdfrench3
08-26-2018, 07:10 PM
My G752VS-XS74K came with 16GB RAM. It was on a single stick. I had to disassemble the laptop to install more RAM. I added three more sticks of 16GB RAM for total of 64GB.



Newegg P/N 9SIAA443SS0642 APACER NOX DDR4 16GB 260-Pin DDR4 SO-DIMM DDR4 2800 (PC4 22400) Laptop Memory Model ES.16G2W.GFE

Clintlgm
08-27-2018, 12:44 AM
The Apacer run at 1200 indeed, but should have 1400 (so current RAMs to install should be 2800MHz indeed ... while my HWiNFO says they are programmed at only 1300 ... ASUS ... may you know why?

Anyway, took a while I can afford this special model hehe ... almost happy with it, but definitely design of the Asus G752 doesn't allow for fitting big harddisks so no choice, I am targeting the latest 4TB SSDs coming out now ... and upgrade to 32GB with the Apacer modules, so should be future proof a while.



Computer: ASUS G752VSK
CPU: Intel Core i7-7820HK (Kaby Lake-H, B0)
2900 MHz (29.00x100.0) @ 3589 MHz (36.00x99.7)
Motherboard: ASUS G752VSK
BIOS: G752VSK.302, 04/27/2017
Chipset: Intel CM238 (Skylake PCH-H)
Memory: 16384 MBytes @ 1196 MHz, 17-17-17-39
- 16384 MB PC22400 DDR4 SDRAM - Apacer Technology 76.D305G.D060B
Graphics: NVIDIA GeForce GTX 1070 (GP104M) [ASUS]
NVIDIA GeForce GTX 1070, 8192 MB GDDR5 SDRAM
Drive: HGST HTS721010A9E630, 976.8 GB, Serial ATA 6Gb/s @ 6Gb/s
Drive: SAMSUNG MZVPW256HEGL-00000, 250.1 GB, NVMe
Drive: SAMSUNG MZVPW256HEGL-00000, 250.1 GB, NVMe
Drive: HL-DT-ST DVDRAM GUE1N, DVD+R DL
Sound: Intel Skylake PCH-H - High Definition Audio Controller
Network: Intel Dual Band Wireless-AC 8260 AC 2x2 HMC WiFi Adapter
Network: RealTek Semiconductor RTL8168/8111 PCI-E Gigabit Ethernet NIC
OS: Microsoft Windows 10 Professional (x64) Build 17134.228 (1803/RS4)

You should put you PC Spec in your profile
Hwinfo64 read each stick so in dual mode 1300 x 2 would be 2600 When putting RAM in under the keyboard it best to put 4 matching sticks so you have 2 matching stick and 2 that don't match and maybe 1 slower ram the whole system will run at the slowest ram speed