I've ran through a variety of sticks now, some qvl approved and some not and literally no matter what xmp will never work. I can not go above 4000mhz with two sticks, which at that point there really isn't any point in even using DDR5. Surely this i...
Using GPU Tweak 3 to control GPU and Memory Mhz doesn't seem to be working. I set the Boost Clock at 2400 Mhz and Memory Clock at 20k Mhz, but looking at the Monitor Graph reading, the GPU Clock goes to over 2800 Mhz and Memory Clock at 21k Mhz - fa...
My System specs :Intel Core™ i9-14900KASUS ROG Maximus Z790 Dark Hero ASUSG.SKILL Trident Z5 RGB Series 48GB (2 x 24GB) 288-Pin PC RAM DDR5 8000 (PC5 64000) (CL40-48-48-128 1.35v) So that is what I am trying to fix.Anytime I turn XMP on it either bso...
I upgraded mono and cases from the hyte 40 and mid pro z790- p WiFi to the nxzt H9 Flow looks are stunning. Soon as I turn on the AI overclock feature I get a cooler score of 160 and tunes my ratios 2 cores 59 rest 57. It get hot tjmax soon as cinben...
Long time no see folks! Got this new build together and I've been riding the struggle bus trying to get a modest overclock stable. Im honestly a bit overwhelmed with all the new settings this board has vs my previous Z590 Apex. Unfortunately it does...
Good evening everyone, I recently built a new system which the specs are below. The problem I am having is I can not turn on XMP, XMP I or XMP II as the system hangs at Q-Code 55. Therefore, I can't run my memory which is rated for 6000 mhz at it rat...
i have an i5 8600k overclocked to 4.8ghz and it`s still bottlenecking my rog strix vega 64, what should i upgrade my cpu to? (within lga 1151 socket)
Hello, I've just installed a i9-14900k CPU with Corsair 6000mhz Ddr5 and Corsair AIO liquid cooler H150i RGB LINK 360mm conected to CPU_Fan header of an Asus Strix Z790F Gaming wifi II motherboard. Fan config is 3x120 pushing out heat from top mounte...
Making this post because I can't reply to the relevant post someone made about flashing black screen past 60+hzIf your ROG Swift (or really any) 360hz monitor is flashing black screen when you try to take it above 144hz or so, your display port cable...
Running a G614JI, I can't find anywhere in the BIOS to disable CEP (but I may not know where to look).
