Hello Anonymous22
I don't have the ROG 5s phone, but the current version of Armoury Crate is 5.7.9.0.
If you have Armoury Crate installed, click settings at the bottom left, then update center. Here, you can check for updates.
Hello pcgamersz
Some suggestions ...
1) In the bios, try setting the pcie link speed to Gen 4.
2) Try clearing the cmos.
3) Try updating the bios.
4) Try reseating the gpu.
Some questions...
1) Are you using a riser cable?
2) Are you using a pcie 3...
Hello everyone,
I have the ROG Harpe Ace Aim Lab edition mouse and just got the ROG Strix Scope II 96% wireless keyboard, both support the ROG Omni Receiver and I wanted to share how easy it is to upgrade. Here is a more detailed guide you can follo...
Good day ROG overclockers,I'd like to share my overclock with the ROG Strix Z690-F Gaming Wifi motherboard and the i7-12700KF cpu.Maximum temps look high in the 80's but these were spikes, it mainly ran in the 50'sc to 70's c.The IA Limit Reasons sho...
Hello,Does anyone have experience with or know of a good brand of UV LED strips?I'm doing a build in the Thermaltake Tower 900, the UV LED lights I'm currently looking at are the Darkside Connect G2 Pro UV LED light strips. Trouble is, they're only 1...
When you reset the bios to defaults, it will set your DDR4 memory to the default speed of 2133MHz.
Enabling X.M.P. will set your memory to its rated specifications.
The kernel power event ID 41 means your pc shut down unexpectedly, this could either...
Hello JV
Comparing your keyboard and dongle versions to mine, they are up to date.
Have you updated to the ROG Omni Receiver?
ROG Azoth | Gaming keyboards|ROG - Republic of Gamers|ROG Global (asus.com)
If you've updated to the ROG Omni Receiver and...
Hello Smugller
Try this.
1) Find the gif you want and click on it.
2) Right click on the gif and click "Open image in new tab".
3) In the new tab, Right click on the gif and click "Save image as"
4) Select pictures and click Save.
5) Upload the gif f...
Hello Frickenhd2
Yes, it's safe to reset the bios to default settings to do some testing. The only thing you'll have to do is set your memory after testing.
This is a good idea, let us know how your testing goes at default settings.
Hello exortek979
If performing a factory reset with the Fn+Esc keys didn't get them working, it's possible those two switches are going bad.
They are available for purchase, but the switches are not hot swappable so replacing them could be a challeng...