Hello Anonymous22
I don't have the ROG 5s phone, but the current version of Armoury Crate is 5.7.9.0.
If you have Armoury Crate installed, click settings at the bottom left, then update center. Here, you can check for updates.
Hello pcgamersz
Some suggestions ...
1) In the bios, try setting the pcie link speed to Gen 4.
2) Try clearing the cmos.
3) Try updating the bios.
4) Try reseating the gpu.
Some questions...
1) Are you using a riser cable?
2) Are you using a pcie 3...
Hello everyone,
I have the ROG Harpe Ace Aim Lab edition mouse and just got the ROG Strix Scope II 96% wireless keyboard, both support the ROG Omni Receiver and I wanted to share how easy it is to upgrade. Here is a more detailed guide you can follo...
Good day ROG overclockers,I'd like to share my overclock with the ROG Strix Z690-F Gaming Wifi motherboard and the i7-12700KF cpu.Maximum temps look high in the 80's but these were spikes, it mainly ran in the 50'sc to 70's c.The IA Limit Reasons sho...
Hello,Does anyone have experience with or know of a good brand of UV LED strips?I'm doing a build in the Thermaltake Tower 900, the UV LED lights I'm currently looking at are the Darkside Connect G2 Pro UV LED light strips. Trouble is, they're only 1...
I don't have this particular headset, but after looking at what you posted, you are correct, these are two different things.
I had to research and this is what I came across.
Active Noise Cancellation relies on a principle of physics called phase can...
Hello TheMummy56
The Noise Cancelling for the microphone is activated by pressing the power button.
To turn your headset on and off press and hold the power button for 2 seconds. Then, press the power button to switch between the four noise cancellin...
That shouldn't be necessary.
Try pressing and holding the bios flashback button until it starts to flash. If it's not working, try using EZ-Flash in the bios. You can let your usb flash drive connected to the bios flashback port.
Enter the bios and g...
Hello orhantahan61
Try uninstalling Armoury Crate from windows, then reboot your pc.
Once rebooted, install Armoury Crate version 3.2.11.2, then go to the Armoury Crate update center and check for updates.
Is your motherboard showing after doing this...