Hello Anonymous22
I don't have the ROG 5s phone, but the current version of Armoury Crate is 5.7.9.0.
If you have Armoury Crate installed, click settings at the bottom left, then update center. Here, you can check for updates.
Hello pcgamersz
Some suggestions ...
1) In the bios, try setting the pcie link speed to Gen 4.
2) Try clearing the cmos.
3) Try updating the bios.
4) Try reseating the gpu.
Some questions...
1) Are you using a riser cable?
2) Are you using a pcie 3...
Hello everyone,
I have the ROG Harpe Ace Aim Lab edition mouse and just got the ROG Strix Scope II 96% wireless keyboard, both support the ROG Omni Receiver and I wanted to share how easy it is to upgrade. Here is a more detailed guide you can follo...
Good day ROG overclockers,I'd like to share my overclock with the ROG Strix Z690-F Gaming Wifi motherboard and the i7-12700KF cpu.Maximum temps look high in the 80's but these were spikes, it mainly ran in the 50'sc to 70's c.The IA Limit Reasons sho...
Hello,Does anyone have experience with or know of a good brand of UV LED strips?I'm doing a build in the Thermaltake Tower 900, the UV LED lights I'm currently looking at are the Darkside Connect G2 Pro UV LED light strips. Trouble is, they're only 1...
Hello nrobert32
Check on the keys page you didn't accidentally reassign the keys.
You can also try clicking the reset button near the top right of the keys page, or resetting your keyboard by pressing and holding the Fn+Esc keys until it flashes gree...
Ok, so you still have the 4151 error after doing the firmware update.
Try uninstalling and reinstalling Armoury Crate.
Uninstall Armoury Crate from windows, then reboot your pc.
In the link below, click Drivers & Tools, Install Armoury Crate version ...
Thank you
If you have an ROG motherboard and is listed in Armoury Crate, check this.
1) On the left click the Device tab
2) Click on your motherboard
3) Click the Audio tab
4) Does it show anything about Two-Way AI Noise Cancellation?