©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

Gizmowned · 05-05-2013

Hey guysWhen I built my new build I mistakenly plugged the OS Samsung 840 Pro SSD into the Sata6g_e1 connection which resulted in 335MB/s write and reads. After reading up I realized I could get better speeds through Sata6g_1 so I changed over. Now t...

Gizmowned · 05-06-2013

I've done the above and it does seem to have removed the Disk Read Error Screen. I've noticed though that the transfer rate keeps changing from 6Gb/s for the first 5 minutes down to 3Gb/s and stays like that until I reboot. I've also changed to a few...

Gizmowned · 05-05-2013

Removing the drivers has helped now I'm getting speeds of 500MB/s but its being a little unstable at start up. During booting up it sometimes say Disk Read Error but if I hit the reset button it loads Windows. Same if I quit out of BIOS.

User Statistics

User Activity

SSD runs at 15-20MB/s under Sata6g_1 but 300+MB/s under Sata6g_e1

Re: SSD runs at 15-20MB/s under Sata6g_1 but 300+MB/s under Sata6g_e1

Re: SSD runs at 15-20MB/s under Sata6g_1 but 300+MB/s under Sata6g_e1