©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

Yarjard · 03-06-2019

Hello guys,CPU: 7940X delidedMB: Rampage VI Extreme - BIOS 1301OC 4.5G@1.15v manual mode , AVX offset 2 , AVX512 offset 5Base on Intel Ark, the Tj.max is 102 degreeWhen I using AIDA64 5.97 FPU Stress test after 5 minute , cpu clock start became unst...

Yarjard · 05-04-2018

Hello guys, CPU: 7940X MB: Rampage VI Extreme - BIOS 1301 RAM: G.Skill Trident Z F4-3200C16-8GTZR - 8G*4 I've had a stable overclock on my 7940X 4.5G @ 1.15v , but I want it reduce voltage at idle.here is my current setting and test result, Additiona...

Yarjard · 01-08-2018

Hello guys,CPU: 7940XMB: Rampage VI Extreme - BIOS 1004RAM: G.Skill Trident Z F4-3200C16-8GTZR - 8G*4I got some boot issue with my RVIEFirst is cold boot. If the computer was switched off for a while or maybe just a few minutes , when i turned on, it...

Yarjard · 05-08-2018

Nate152 wrote:The load voltage in #1 looks like it took effect.Yep, that's the only way I can take.If your desire voltage is lower than default voltage,the adaptive mode is the same as offset mode.

Yarjard · 05-08-2018

Nate152 wrote:Praz says the applied Vcore can't go lower than default value when using adaptive mode, for a lower voltage a negative offset is required.Ok, so try adaptive mode again with 1.20v and a negative offset of -0.050v, then check AI Suite 3...

Yarjard · 05-08-2018

Nate152 wrote:I came across this thread in the Aida64 discussion forum where an administrator says skylake x will show the same reading for vcore and VID.https://forums.aida64.com/topic/3980-vcore-with-7940x-and-asus-rampage-vi-apex/Thanks Nate! tha'...

Yarjard · 05-07-2018

Nate152 wrote:All rightPost us a screenshot of the Vcore in AI Suite 3, take the screenshot while running the test.This sounds promising, at least it's still not reading 1.00v.Actually I already posted #18 haha..You can see the CPU Core Voltage rep...

Yarjard · 05-07-2018

Nate152 wrote:Thank youSometimes using more than one monitoring program can give wrong readings, try with HWMonitor only.Still the Same. I think it's a misreading value.The Cpu Core Voltage reported by AI Suite3 is the same as Core VID.

User Statistics

User Activity

The Tj.MAX for AVX512

how to increase idle voltage at adaptive mode?

Rampage VI Extreme Boot Issue

Re: how to increase idle voltage at adaptive mode?

Re: how to increase idle voltage at adaptive mode?

Re: how to increase idle voltage at adaptive mode?

Re: how to increase idle voltage at adaptive mode?

Re: how to increase idle voltage at adaptive mode?