Hello,i purchased sm 951 512gb nvme ssd for my r5 and i installed the drive on the m.2 slot but i cant get more than 1600mb/s read speed.I disabled c states and power saving options but still same also cant enable SMART function .What should i do?
Hello today i got my replacement cpu from intel and i am having problems. My system 16gb 4x4gb 3200mhz gskill ram, 5960x cpu 128 gb ssd.I tried all rams 1 by 1 or 2 by2 to each slot system looks fine but when i enter 4 rams and i turn on my pc i som...
Hello,i plugged my oc panel yesterday and i upgraded it to 0501 firmware.My problem is: i can see everything on the panel menu but cant change any setting .When i press start,+,- clear etc.nothing happens.What should i do?
I bought 3x290 sapphire cards and i sold my motherboard which was msi m power max .I still have delided 4770k.I was thinking of buying new asus z97 vii extreme and tri way crossifre but i think the vii extreme wont be here soon.Should i wait for th...
jonstatt wrote:The PC turning on and off every 3 seconds can be due to USB issues. I have experienced this one as well. While it doesn't sound good at all....let's strip back to basics here and disconnect all USB devices except a keyboard. Power off ...
Chino wrote:Try setting your RAM up manually. See if that helps. If not, then you will need to tune the voltages manually.i checked your guide and i think i should try sa voltage
Chino wrote:Anything over 2133MHz for RAM is considered overclocking. Enabling XMP is actually overclocking your RAM without knowing it.hello,sorry for the late response.i am using bios 1001 ,my system seems stable now with xmp settings but when i de...
LiveOrDie wrote:Please search the forums before postings , bd / bf q-code are from failed memory training your memory is stable by other meens.Chino wrote:Make sure your motherboard is running the latest BIOS. DRAM overclocking has been improved alot...