©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

Zicon · 02-01-2014

Hi, i've got the Maximus VI Formula board with a 4770k cpu and i'm having problems getting my RAM to work at the advertised speed. I've updated the BIOS to 1302 and i'm still having problems I've installed 4x8GB Corsair DDR3 sticks - CMY16GX3M2A24...

Zicon · 02-03-2014

i tried that and it didn't like it. it rebooted a few times and then windows blue screened when loading up and then it rebooted and was beeping a lot, so i reset bios and put it back 

Zicon · 02-03-2014

ok thanks i'll give it a go now.

Zicon · 02-03-2014

Raja@ASUS wrote:The big issue you have here is combining those two kits together and assuming that the rated speed and timings still apply. Kits are binned according to their density - breaching those specs means that plug-and-play will no longer wor...

Zicon · 02-03-2014

Nate152 wrote:Hi Zicon, Welcome to the ROG community. Try setting up your RAM manually again. Go into your BIOS, Hit F5 to set defaults, go to Extreme Tweaker Tab and set the AI Overclock Tuner to manual. Set the RAM frequency to 2400, Dram voltage 1...

Zicon · 02-02-2014

Also when i look in the bios it says target memory speed 2200, but in the ASUS AI Suite it reports 1100 and in CPU-Z it reports 1100 as well. Does that mean it's only running at 1100MHz at the minute, or does it just report 1100 because it's dual ch...

User Statistics

User Activity

Formula board stuck in boot loop when enable XMP

Re: Formula board stuck in boot loop when enable XMP

Re: Formula board stuck in boot loop when enable XMP

Re: Formula board stuck in boot loop when enable XMP

Re: Formula board stuck in boot loop when enable XMP

Re: Formula board stuck in boot loop when enable XMP