You seem to be having the same symptoms as those using the old Sandforce firmware SSD's. From what I read about problems with this particular PCIe SSD, it requires a PCIeX4_3 slot which would be the very bottom slot on the Maximus Hero. Although it's...
I was hoping for that type of functionality. It's obviously made for a dual fan CPU heat sink or radiator. No wonder there is only one fan setting in the Ai for both of those fan headers. The fan controller on the Ai really works well for me. Thanks ...
RedTez wrote:@ Chevell crikey - errrm - lots there to mull over - errrm I was thinking of following this http://www.overclockers.com/3step-guide-to-overclock-intel-haswellAny opinions good or bad?? My pc is water cooled with a 360mm 3 fan radiator -...
Praz wrote:HelloThe CPU_OPT fan header is slaved to the CPU_FAN header. The CPU_OPT header was not designed to be used without the the CPU_FAN header which is why there are no separate settings in the UEFI for its control. This does not invalidate wh...
Using auto configuration is not advised for any type of serious overclock or for having long term stability. The Ai tends to over volt and has limited functionality for fine tuning. The bios has many more options for overclocking and fine tuning. The...