©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

habbich · 04-01-2016

Motherboard model:Rampage V Extreme/U3.1UEFI Version:2001CPU:Intel I7 5960xMemory kit part number (s) and amount in GB:G.SKill TridentZ - F4-320016Q-32GTZ, 4x8GB kit (rated @3200MHz)GPU:MSI 980ti 6GSSD/HDDs/Optical drives:M2 Samsung SM951 - 125GBSams...

habbich · 03-31-2016

Motherboard model:Rampage V Extreme/U3.1UEFI Version:1701/1902/2001 (doesn't matter which one)CPU:Intel I7 5960xMemory kit part number (s) and amount in GB:G.SKill TridentZ - F4-320016Q-32GTZ, 4x8GB kit (rated @3200MHz)GPU:MSI 980ti 6GSSD/HDDs/Optica...

habbich · 03-31-2016

Motherboard model:Rampage V Extreme/U3.1UEFI Version:1902/2001 (doesn't matter which one)CPU:Intel I7 5960xMemory kit part number (s) and amount in GB:G.SKill TridentZ - F4-320016Q-32GTZ, 4x8GB kit (rated @3200MHz)GPU:MSI 980ti 6GSSD/HDDs/Optical dri...

habbich · 11-19-2015

Motherboard model:Rampage V Extreme/U3.1UEFI Version:1601CPU:Intel I7 5960xMemory kit part number (s) and amount in GB:G.SKill Ripjaws4 - F4-3000C15Q-16GRR, 4x4GB kit (3000MHz)GPU:MSI GTX980Ti 6GSSD/HDDs/Optical drives:M2 Samsung SM951 - 125GBSamsung...

habbich · 08-18-2015

Motherboard model:Rampage V Extreme/U3.1UEFI Version:1401/1502 (doesn't matter which one)CPU:Intel I7 5960xMemory kit part number (s) and amount in GB:G.SKill Ripjaws4 - F4-3000C15Q-16GRR, 4x4GB kit (3000MHz)GPU:GTX980Ti OCSSD/HDDs/Optical drives:M2 ...

habbich · 04-20-2016

Why do you think it's not a great idea? Have the machine up for a couple of days now and no instability issues occurred...yet Did not really test it thoroughly yet (lack of time), just some usual work. Will give it a push this weekend.

habbich · 04-20-2016

Had the same issue...Have my Dell monitor USB hub connected to the USB3.1 card, my keyboard and mouse went dark while benchmarking, had to turn off and turn on the monitor to get them working again. Interesting fact - another mouse connected to that ...

habbich · 04-18-2016

Yes...finally. Got it stable (at least to this point). CPU - 4.5G @1.25V (fixed)RAM - 3G @1.36 (16, 16, 16, 36, 2T) - 0.856V VCCSATested for 2 days with all the modules in Sisoft Sandra, AIDA64, SuperPI 32, stresstestapp, Memtest, RealBench, Cinebenc...

habbich · 04-16-2016

The VCCSA on auto is usually set at 0.856V...And Max you are right... I was wondering about that, I had the VCCSA at 1.152-1.160 when booting with 1.355V on my DIMMs, and of course failed on Realbench. Do the auto settings go berserk from time to tim...

habbich · 04-15-2016

Ok, so this just in...I've installed the new PSU, re-seated the CPU and the RAM modules, practically remounted everything. Also used the 980ti... Didn't get any picture on the DP even though the MB booted to BIOS (saw it on the OC panel). Anyhow hook...

User Statistics

User Activity

Raining Q codes :)

Saving new settings in BIOS -> rebooting to A2.

Q code 40 with Windows fast boot enabled

Change BCLK to 100MHz from XMP AUTO 125MHz

BIOS strange behaviour with USB3.1 card

Re: Raining Q codes :)

Re: USB Loss after playing games

Re: Raining Q codes :)

Re: Raining Q codes :)

Re: Raining Q codes :)