ok, inputting manually loose timings did let me get 3600 trained, sometimes but obviously not stable.1.45v does not help either. I do believe my RAM is comfortable with 2T command rate, and BIOS insists on 1T all the time, so have to wait till ASUS...
entropic-remnants wrote:It's letting you adjust it, but is resetting it to those values when it fails memory training. I haven't got a clue and the only thing I can tell you is that when you find whatever is causing it to fail memory training during...
So again I am getting Q-Code 8 system shutdown with orange light slowly blinking. This was present with older BIOSes as well as new betas. Here is my sticks:https://www.scan.co.uk/products/8gb-(2x4gb)-corsair-ddr4-vengeance-lpx-red-pc4-32000-(4000)-n...
entropic-remnants wrote:The reset of speed happens when the memory fails training. I guess you are setting the other parameters to the XMP profile data like tFAW, tRFC and so forth? If you haven't that might help, don't know. I'm running 9945 with...
I have 4000Mhz rated memory, but 9943 just resets mem frequency to default when I select anything above 3200Mhz. Also I cannot manually set certain timings, it lets me select either Auto or 0(zero). And yeah, command rate is always 1T regardless if I...