©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

Extro · 06-05-2015

Hello all.I have the issue to intall, better to say to recognize the m.2 ssd under BIOS.I used 2 different ssd's for the verification of the function of the m.2 port.the 1st drive: Kingston Hyper X (SHPM2280P2/240G) which is stated as PCIe Gen 2.0 x ...

Extro · 08-09-2015

Just a brainstorming:The bios version is the proper one? (As fart as I know there was a BIOS update where the Devil's Canyon support has been improved)I'm also curious to see the root cause, because it really uniq case

Extro · 07-22-2015

An additional Idea would be to check all the USB devices connected to the board. Some time they also may cause A2-Code. (e.g. Firmware <-> BIOS conflict)

Extro · 07-22-2015

Hi,from my experience in the past as I had A2 issue it was mainly related to the GPU (GPU RAM). It was a MSI z77 board + AMD HD7970 from PowerColor. The change of the MB to another model did not bring any change. I only could solve the issue by chan...

Extro · 06-07-2015

Yes it's not. But the pin connection is still given and not brocken. Additionally If this physical damage (which is at least to me non one) occurs during the normal and carefully done assembly of the PCIe Combo board, then the issue is on the process...

Extro · 06-07-2015

So just straitghten the pin. During the plugin in it was bended again to the position as shown on the pictures below, so I had to pushh slightly to force it into the socket. But it did not solve the issue. The M.2 drives are still not recongnized / l...

User Statistics

User Activity

Asus Maximus VII Impact (M7I) M.2 Issue / SemiRecognition

Re: MAXIMUS VII IMPACT has locked CPU ratio at 8x

Re: Maximus VII Impact not able to boot

Re: Maximus VII Impact not able to boot

Re: Asus Maximus VII Impact (M7I) M.2 Issue / SemiRecognition

Re: Asus Maximus VII Impact (M7I) M.2 Issue / SemiRecognition