©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

sireric · 02-24-2020

Hi,With previous bios, I had no issues booting to windows 10 on my Samsung NVME m2 1TB SSD. However, after flashing to the latest 1401 bios, only network and USB show up as bootable disks. The NVME SSD and my regular HD show up in the advance bios se...

sireric · 11-04-2015

Noticed on the www.asus.com website in Windows 10 64b support page.

sireric · 02-26-2020

Thanks. *But does that mean you have to unplug the USB3 device every time you reboot?

sireric · 02-25-2020

I got it to boot by doing the following:1. Enabling CSM and setting UEFI for PCIe component2. Disabling fast boot3. unplugging my USB3 backup driveIt seems to be getting confused with the USB3 drive. *When plugged in, I get the "GPT corruption detect...

sireric · 02-24-2020

Ok, got the drive back on the menu. But now it says GST header corruption detected. *Any ideas?

sireric · 02-24-2020

Is this the CSM submenu in the boot bios settings? *I've tried going in there and enabling/disabling it, and I still can't see the drive in the boot menu. *Or is this CSM setting elsewhere in the bios?

sireric · 06-03-2017

Allmachtige wrote:What did you set your Q-Fans settings to in the BIOS to get your water cooler to work properly without Corsair Link?I used the corsair link to setup the profile. My h80i runs the last profile it was told, without needing the corsair...

User Statistics

User Activity

Boot problem on Z390 STRIX-E after BIOS update (1401)

New realtek driver released for Maximus VIII Hero

Re: Boot problem on Z390 STRIX-E after BIOS update (1401)

Re: Boot problem on Z390 STRIX-E after BIOS update (1401)

Re: ASUS Z390-E Won't Boot After BIOS Update

Re: ASUS Z390-E Won't Boot After BIOS Update

Re: Phantom hiccup/stutter every few seconds during video or any movement