It may just be a BIOS issue and might be fixed with a future update, but for now the memory modules I have bought do not work with the M8R and the 1302 or earlier BIOS. Not the full set of 4 anyway! I can run any combination of two modules, no proble...

I am trying to follow this guide: Windows® 7 and USB 3.0 driver installation for 100 Series and Braswell platformVariant 1 didn't work. I selected the USB stick (UEFI) as Boot device, but the startup process eventually switched to another device.In V...

I'm currently trying to resolve seom stability issues by disconnecting all the parts of my system. One thing I couldn't disconect though was my graphics card, and the reason is that for some reason I don't get a signal from the onboard graphics chip...

I've picked up elsewhere that after installing Windows 7 I should disable CSM to take full advantage of the fast UEFI boot capabilities. However, when I do that, boot fails, and I end up on a black screen telling me that The CSM (Compatibility Suppor...

I have a 4x4 GB Kingston HyperX Fury Black set (HX426C15FBK4/16) installed on a Maximus VIII Ranger, and suspect it is causing instability in my new-built system.They're supposed to run at 1.2V, but the BIOS shows a voltage of 1.344V. Voltage setting...