©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

HiTach · 02-29-2016

Greetings,I installed W10Prox64 on the 512GB Samsung 950 Pro Nvme with my new RVE motherboard, SATA controller 1 set to RAID, but no hard drives attached.Works great.Adding hard drives I find it difficult to get into the Ctrl-I menu, but I have done ...

HiTach · 03-06-2016

Does anyone know how to export AI Suite III settings for restoring after an OS re-install?

HiTach · 03-01-2016

GoNz0- wrote:using my modded 1902 BIOS with 2 RAID 0 arrays and a 950 pro with no issue on my 5930Thanks GoNz0, I got it working.Details here

HiTach · 03-01-2016

clio16v wrote:You must have CSM Disabled for Samsung 950 pro to work properly. If you have CSM Disabled you cannot access raid setup with CTRL-I any more... You have to setup your RAID disks from inside UEFI BIOS. Look in Advanced menu the last optio...

HiTach · 03-01-2016

Minsekt wrote:disable fastboot and csm. try 100bclk too instead of 125bclk (i guess your tridentz are 3200mhz) this forces the m.2 to run at gen3. it will drop to gen2 if youre using 125bclk (just disable your xmp profile, this should let it run at 2...

HiTach · 02-29-2016

gene-iv-ocz-revo3-240 wrote:I have the 950 Pro and can boot fine with it in the M.2 slot with a raid0 drive. It's possible the boot order changed in the bios and you need to switch it.Also I installed Windows10 on the 950PRO in UEFI bios mode I have...

User Statistics

User Activity

M.2 boot drive with RAID data drives - M.2 disappears, can't boot

Save/restore AI Suite III settings

Re: Samsung 950 Pro and 4TB WD Black x2 on Raid 0

M.2 Boot 3TBx4 RAID 10 success

Re: M.2 boot drive with RAID data drives - M.2 disappears, can't boot

980