Hello, I'm just looking for some clarification on these m.2 slots on this motherboard, PLEASE correct if I'm wrong, but my understandingis the following......1. M.2_1 (ENCLOSED SLOT BETWEEN PCIE SLOTS) (SATA/PCH ONLY ) (CAN BE MIXED WITH INTEL SA...
I've been running my new system @4.3Ghz(all cores) with no offsets for AVX/AVX-512 fora few weeks with out "any" issues. I've been mostly running 3DMark and OCCT for heat,prime 95 with AVX for load and heat, got some great physics and CPU scores in 3...
Just got the system up and running and right now i'm on a light overclock to (4.0Ghz all cores (AVX as well))... There'snot a lot of information out there on the 7940x, but my hottest core under load is 72c with OCCT or Aida, and all myother cores ar...
Using the latest version of Realbench and my score is not showing up on the leaderboard. However, if you search for my name it's displayed. Any ideas ?
First of all, everything is running great !All cores @ 4Ghz with Corsair ram at 3000Mhz 15-17-17-35. My temps in OCCT 4.4.2 are 71c, and passes Realbench for an hour. So unless i upgrade my cooler I'll probably won't go any higher (I may do a couple ...
Geekslayer wrote:I have a 7940x with all cores at 4.3, I have my VCCIN at 1.95/ LLC 6 and under load it's ends up around around 1.87. If it dropsbelow 1.83, i'll get a blue screen while playing one of my games. My SA Voltage is around .910 as well. ...
Geekslayer wrote:I found a great deal on (4) 860 EVO 1TB SATA III drives on Black Friday, but they're plugged into the SATA III ports 1-4 (PCH) and shouldn'treally affect the m.2 ports. The 970 pro is running great in M.2_1 DIMM2. Shame on Asus for...
JustinThyme wrote:Check that you are not sharing any lanes. Do you have other sata drives installed? Is it set up for gen 3 and X4? *I get the same results no matter where I put it.*I found a great deal on (4) 860 EVO 1TB SATA III drives on Black Fri...
LiveOrDie wrote:Thanks for the reply, does LLC effect the VCCIN because I've never needed to change it for my overclock before but I did have LLC on level 6.I have a 7940x with all cores at 4.3, I have my VCCIN at 1.95/ LLC 6 and under load it's end...
LiveOrDie wrote:Thanks for the reply, does LLC effect the VCCIN because I've never needed to change it for my overclock before but I did have LLC on level 6.If you manually set the VCCIN to lets say 1.9 and you're not using LLC, that 1.9 could drop ...