©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

zabblleon · 03-20-2017

Build:Ryzen 1700xG.Skill F4-3200C14D-32GTZSWCrosshair VIWas up running fine on BIOS 902, then the machine suddenly died. I can access BIOS, but once an operating system tries to load I get bootloops or freezes with Q-code 8, RAM light flashing. Thing...

zabblleon · 03-23-2017

nazzario wrote:Hi everyoneMy Problem is fixed now. I have received my new Mainboard today. Now my Problem was i had Code 8 and no q-led lights on startup. So that i mean id could not be another Problem. So now it works fine. Thanks all for Support an...

zabblleon · 03-22-2017

Evanair wrote:Have you tried updating to the 1001 BIOS (or the 2T one) that was sticked at the top of the forums?Yeah, this is persistent on 902 and 1001. No difference between the two.

zabblleon · 03-22-2017

Tried this suggestion from the Overclockers forum thread, but no luck:"Try this:PSU Power Off. Take RAM completely out. PSU Power On. Clear CMOS. Try to boot, receive error.PSU Power Off. Put RAM back in (Slot A2 is recommended for whatever reason). ...

zabblleon · 03-21-2017

hbsteddy wrote:Boot to Bios etc. is no problem. Its just if we try to boot from Windows Stick or Windows Installtion. At this point its Stack.That's a pretty good summary. Bios detects all drives, graphics card, CPU speed/voltage/type, et cetera but ...

zabblleon · 03-21-2017

Demoniacstar wrote:do you have 8 gig sticks you can try?Unfortunately no, though it looks like others have tried this with no success.

User Statistics

User Activity

Build was fine, then dead with Q-code 8

Re: Asus Crosshair VI Hero Q-Code 8 / Not Starting

Re: Build was fine, then dead with Q-code 8

Re: Build was fine, then dead with Q-code 8

Re: Build was fine, then dead with Q-code 8

Re: Build was fine, then dead with Q-code 8