first the way i do it with my 1800xgo to pstateschange the first pstate to what you wantA0 for 4g mine is 3.925(can't remember the code)leave pstatesforce soc to 1.15 force pll to 1.8if you want to change voltages use cpu offset in extreme tweaker an...
PeZzy wrote:I run 4 DIMMs of this memory at 3200Mhz with no BCLK overclock, but at 18-14-14-14-34 timings. My VDDSOC is 1.09 and DRAM voltage is 1.35.Take a look at VDDSOC Phase Control and ProcODT, instead of pumping up the voltage.examples of what ...
first less lump more paragraphs my head hurts with the bios throw the one you want on a fat32 formatted drive.use the bios flash from drive and go to said usb.unless you are going backwards you generally do not need to rename it but it doesn't hurt ...
i use cpu fan and cpu opt for my fanschange settings in monitor down the bottomchange the case fans to read from the motherboard and set the cpu to what you want mine is set to 75 percent at 75 and 50 percent a t 60(as it reads the temps from the ite...
XNMBYY wrote:I set the voltages at auto all the time, maybe cold start up wont give the same setting at its first try and I should set those to manual?And I just set CPU ratio back to auto again, still got a similar result(6151).auto works i just fin...