Updated to the latest BIOS and still have this issue. Sometimes I can hit the fn + f6 (screen off and on button) and it somehow turns the screen on. But this doesn't always work and results with a hard powerdown with power button, then turning back...
Having issues with my 512GB m.2 960 Samsung not always booting up windows. Once in about 10 times, from either reset, or shutdown, the screen will flash a few times at startup, then go into bios. I then check bios for boot disk (the m.2), and my ...
So after a few weeks of messing around with things, I've found that disabling actions when closing the lid (eg sleep when lid closed), stops this issue from happening. Just have to remember to power down or sleep your laptop before closing the lid o...
max1234 wrote:Also having similar issues. Sometimes my PC freezes when the windows logo shows up. After turning it off and turning it back on, it works fine. Reinstalled Windows 10 to see if that could solve the problem. Unfortunately, it didn’t work...
It's in PCIe mode on slot M.2_2, but SATA 5 and 6 are disabled because it's running at 4xThis is in the manual for the Hero IX"When the M.2_1 Socket 3 is operating in SATA mode, SATA port 1 will be disabled.When the M.2_2 Socket 3 is operating in PCI...
NemesisChild wrote:If you look at the manual, the M.2_1 slot supports both PCIe 3.0 x4 and SATA mode for M.2 PCIe devices.Although it doesn't state it, but if M.2_1 is in SATA mode, SATA 1 & SATA 2 ports are probably both disabled.This was clearly no...
Chino wrote:Is your SSD updated to the latest firmware? I read somewhere they fixed some problems with booting.Latest Firmware Installed: Samsung SSD 960 EVO 2B7QCXE7 Latest Samsung NVMe Driver 2.2Latest Samsung Magician 5.0Also on latest MAXIMUS IX ...