©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

Krzychc · 08-03-2017

Hi,I am having a bit of an issue with my memory. I am using 4x4 GB 3000 MHz CL15 from Corsair (CMK16GX4M4B3000C15, it is on the list of recommended RAM in mobo manual), Asus X99 Sabretooth motherboard and 5960X. Memory should work at 15-17-17-35 1.35...

Krzychc · 08-04-2017

I have found the source of the errors with XMP memory setup. I have to set Fully Manual Mode to Enabled instead of Auto. Voltages remain the same as with Auto so I don't quite understand what is going on. Everything nice but with Fully Manual Mode I ...

Krzychc · 08-04-2017

It is 4x4 kit. Thats mostly my issue, even if everything is on default and I try to configure RAM only, by choosing DRAM frequency and adjusting timings and voltages to the ones from specs, it won't boot. Even at 2600 MHz, not only 3000. 2400 is max ...

Krzychc · 08-03-2017

I have tried Memory BCLK 100:133 setting and it boots at 3200 MHz but throws errors even if timings are increased. With the same 100:133 setting smaller values like 2933 or 2666 won't boot at all. How can 3200 boot and 2600 not boot at the same time ...

User Statistics

User Activity

How to make memory stable at advertised speed but without XMP?(X99 Sabretooth)

Re: How to make memory stable at advertised speed but without XMP?(X99 Sabretooth)

Re: How to make memory stable at advertised speed but without XMP?(X99 Sabretooth)

Re: How to make memory stable at advertised speed but without XMP?(X99 Sabretooth)