Hello.I am trying to make the following setup (without any overclocking) to boot stable and without issues Windows 10 64 bit Pro:Motherboard: Asus ROG Rampage V Edition 10CPU: Intel i7 6850kGPU(s): 2 x Asus Strix 1080ti E...
Hello.I am trying to make the following setup (without any overclocking) to boot stable and without issues Windows 10 64 bit Pro:Motherboard: Asus ROG Rampage V Edition 10CPU: Intel i7 6850kGPU(s): 2 x Asus Strix 1080ti E...
Just tested everything outside the case without the M.2 and the SATA SSD.Even with every possible memory configuration everything worked fine in my workbench... just because the motherboard was off power for some hours.Thankfully nothing is fr...
Chino wrote:Make sure the screws for the monoblock aren't overtightened. Too much pressure can warp the motherboard and prevent the CPU from making complete contact with all the pins in the socket.Just to give the last update...Without any change in ...
Chino wrote:Make sure the screws for the monoblock aren't overtightened. Too much pressure can warp the motherboard and prevent the CPU from making complete contact with all the pins in the socket.Your suggestions does not make much of a sense..If it...
Nate152 wrote:Hi montekristo75Try clearing the cmos, if no help try reflashing the bios or try bios 2.If you get it going and there's nothing connected to the cpu fan header, in the bios on the monitoring tab set the cpu fan speed to ignore.I will do...
Chino wrote:Test your system with a single memory module.So I disassembled everything and started tested stick by stick in the suggested DIMM position.The last DIMM had a problem. So after a while I booted on Windows 10 and continued to prepare the w...