Wobbler
Level 7
since ‎10-03-2017
‎03-17-2023

User Statistics

  • 35 Posts
  • 0 Solutions
  • 0 Kudos given
  • 0 Kudos received

User Activity

So it seems the 2 ports share controller, as having USB 3.1 gen 1 hub connected, with phone and calibration camera(not in use), to the A type port more than halved USB-C Hard drive write speed connected to the type C port. While connected to the hub ...
So in BIOS 0801 and 0901, with AMD NVME raid enabled (2 drives) it messes up other PCIe SSD (Intel PCIe card) control. Inside BIOS this shows that the Intel drive vanishes from the selectable "other boot drives" when one enables the AMD raid (as does...
So I finally but my 4TB WD red pro x4 raid 0 to test on this Zenith Extreme TR x399 BIOS 0801, using the mentioned raid controller on a PCIe card, CrystalDiskMark reported >800 1GB qt32t1 seq speed for empty drive so all seems well. Now with 15% i...
All began about 10 days ago when my keyboards led's stopped working on wasd zone (g710+) had it connected to the 2 second lowest (not 3.1/Qcharge) USB ports. I figured the keyboard might have gone bad, warranty had just expired, but I figured I m...
So finally got my zenith extreme + 1950x, on latest BIOS (0801) and up to date Windows 10 PRO 64 bit. After realizing that I had to up the soc voltage a bit from the auto setting(< 1) to get system stable with rated memory clocks. it been working fin...