©ASUSTEK COMPUTER INC. ALL RIGHTS RESERVED.

rwilko78 · 11-14-2017

Hi, I’ve been having issues with 2 PWM fans in my system. I had them connected via a Y-splitter cable to CHA_FAN3 but they would spin at 100% with PWM set in the bios. I switched the Y-splitter to the H_AMP header and the same thing happened in PWM m...

rwilko78 · 11-13-2017

Motherboard: Maximus X HeroHi, I have 2 EK Vardar PWM fans installed in the front of my case. They are connected to the motherboard using a Y-splitter cable and an extension cable, all cables support PWM. When I enable PWM control in the BIOS the fan...

rwilko78 · 02-27-2022

Hi, I’ve got the same issue with the*ROG Swift PG329Q and a new Maximus Z690 Hero build with a 12900k and 3090FE. I get no display on the monitor until at the Windows 11 login screen and the keyboard is unresponsive during boot, so even spamming Del ...

rwilko78 · 11-14-2017

Thanks, looks like it was a problem with the Y-splitter cable. It’s a PWM cable but when both Fans are connected to it they run at 100% in PWM mode. They work fine if I connect the fans directly to the motherboard. Unfortunately the CHA_FAN3 header h...

rwilko78 · 11-13-2017

I had a Corsair H100v2 AIO cooler and I plugged that into AIO_PUMP header on my Maximus X Hero and it worked fine. Not sure about your fan controller issue but I’m having problems with PWM on 2 fans at the front of my case. They are PWM fans and plug...

User Statistics

User Activity

CHA_FAN3 no longer working MAXIMUS X HERO

PWM fan control issue

Re: ROG Swift PG32UQ Unable to Access BIOS

Re: PWM fan control issue

Re: Help with fan controlling. Strix z370-f